[Intel-gfx] [PATCH 1/2] drm/i915: Reuse normal state readout for LVDS/DVO fixed mode
Ville Syrjälä
ville.syrjala at linux.intel.com
Wed Oct 11 17:18:25 UTC 2017
On Wed, Oct 11, 2017 at 05:21:56PM +0100, Chris Wilson wrote:
> Quoting Chris Wilson (2017-10-10 15:33:33)
> > Quoting Ville Syrjala (2017-10-09 17:19:50)
> > > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > >
> > > Reuse the normal state readout code to get the fixed mode for LVDS/DVO
> > > encoders. This removes some partially duplicated state readout code
> > > from LVDS/DVO encoders. The duplicated code wasn't actually even
> > > populating the negative h/vsync flags, leading to possible state checker
> > > complaints. The normal readout code populates that stuff fully.
> > >
> > > Cc: Chris Wilson <chris at chris-wilson.co.uk>
> > > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > ---
> > > drivers/gpu/drm/i915/intel_display.c | 50 +++++++++++++++++-------------------
> > > drivers/gpu/drm/i915/intel_drv.h | 5 ++--
> > > drivers/gpu/drm/i915/intel_dvo.c | 33 ++++++------------------
> > > drivers/gpu/drm/i915/intel_lvds.c | 18 ++++---------
> > > 4 files changed, 39 insertions(+), 67 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > > index 15844bf92434..f8693374955c 100644
> > > --- a/drivers/gpu/drm/i915/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/intel_display.c
> > > @@ -10247,48 +10247,44 @@ static void ironlake_pch_clock_get(struct intel_crtc *crtc,
> > > &pipe_config->fdi_m_n);
> > > }
> > >
> > > -/** Returns the currently programmed mode of the given pipe. */
> > > -struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
> > > - struct drm_crtc *crtc)
> > > +/* Returns the currently programmed mode of the given encoder. */
> > > +struct drm_display_mode *
> > > +intel_encoder_current_mode(struct intel_encoder *encoder)
> > > {
> > > - struct drm_i915_private *dev_priv = to_i915(dev);
> > > - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > > + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > > + struct intel_crtc_state *crtc_state;
> > > struct drm_display_mode *mode;
> > > - struct intel_crtc_state *pipe_config;
> > > - enum pipe pipe = intel_crtc->pipe;
> > > + struct intel_crtc *crtc;
> > > + enum pipe pipe;
> > > +
> > > + if (!encoder->get_hw_state(encoder, &pipe))
> > > + return NULL;
> >
> > There's no chance that get_hw_state can return a pipe beyond our
> > knowledge? I'm presuming we are part of the early hw setup here, so may
> > not have sanitized everything?
> >
> > > +
> > > + crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
> > >
> > > mode = kzalloc(sizeof(*mode), GFP_KERNEL);
> > > if (!mode)
> > > return NULL;
> > >
> > > - pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
> > > - if (!pipe_config) {
> > > + crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL);
> > > + if (!crtc_state) {
> > > kfree(mode);
> > > return NULL;
> > > }
> > >
> > > - /*
> > > - * Construct a pipe_config sufficient for getting the clock info
> > > - * back out of crtc_clock_get.
> > > - *
> > > - * Note, if LVDS ever uses a non-1 pixel multiplier, we'll need
> > > - * to use a real value here instead.
> > > - */
> > > - pipe_config->cpu_transcoder = (enum transcoder) pipe;
> > > - pipe_config->pixel_multiplier = 1;
> > > - pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(pipe));
> > > - pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(pipe));
> > > - pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(pipe));
> > > - i9xx_crtc_clock_get(intel_crtc, pipe_config);
> > > + crtc_state->base.crtc = &crtc->base;
> > >
> > > - pipe_config->base.adjusted_mode.crtc_clock =
> > > - pipe_config->port_clock / pipe_config->pixel_multiplier;
> > > + if (!dev_priv->display.get_pipe_config(crtc, crtc_state)) {
> > > + kfree(crtc_state);
> > > + kfree(mode);
> > > + return NULL;
> > > + }
> > >
> > > - intel_get_pipe_timings(intel_crtc, pipe_config);
> > > + encoder->get_config(encoder, crtc_state);
> > >
> > > - intel_mode_from_pipe_config(mode, pipe_config);
> > > + intel_mode_from_pipe_config(mode, crtc_state);
> > >
> > > - kfree(pipe_config);
> > > + kfree(crtc_state);
> >
> > This all looks consistent to my eyes.
> > >
> > > return mode;
> > > }
> > > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > > index 0cab667fff57..b57a691409c4 100644
> > > --- a/drivers/gpu/drm/i915/intel_drv.h
> > > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > > @@ -1363,8 +1363,9 @@ struct intel_connector *intel_connector_alloc(void);
> > > bool intel_connector_get_hw_state(struct intel_connector *connector);
> > > void intel_connector_attach_encoder(struct intel_connector *connector,
> > > struct intel_encoder *encoder);
> > > -struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
> > > - struct drm_crtc *crtc);
> > > +struct drm_display_mode *
> > > +intel_encoder_current_mode(struct intel_encoder *encoder);
> > > +
> > > enum pipe intel_get_pipe_from_connector(struct intel_connector *connector);
> > > int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
> > > struct drm_file *file_priv);
> > > diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
> > > index 5c562e1f56ae..53c9b763f4ce 100644
> > > --- a/drivers/gpu/drm/i915/intel_dvo.c
> > > +++ b/drivers/gpu/drm/i915/intel_dvo.c
> > > @@ -379,32 +379,15 @@ static const struct drm_encoder_funcs intel_dvo_enc_funcs = {
> > > * chip being on DVOB/C and having multiple pipes.
> > > */
> > > static struct drm_display_mode *
> > > -intel_dvo_get_current_mode(struct drm_connector *connector)
> > > +intel_dvo_get_current_mode(struct intel_encoder *encoder)
> > > {
> > > - struct drm_device *dev = connector->dev;
> > > - struct drm_i915_private *dev_priv = to_i915(dev);
> > > - struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
> > > - uint32_t dvo_val = I915_READ(intel_dvo->dev.dvo_reg);
> > > - struct drm_display_mode *mode = NULL;
> > > + struct drm_display_mode *mode;
> > >
> > > - /* If the DVO port is active, that'll be the LVDS, so we can pull out
> > > - * its timings to get how the BIOS set up the panel.
> > > - */
> > > - if (dvo_val & DVO_ENABLE) {
> > > - struct intel_crtc *crtc;
> > > - int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0;
> > > -
> > > - crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
> > > - if (crtc) {
> > > - mode = intel_crtc_mode_get(dev, &crtc->base);
> > > - if (mode) {
> > > - mode->type |= DRM_MODE_TYPE_PREFERRED;
> > > - if (dvo_val & DVO_HSYNC_ACTIVE_HIGH)
> > > - mode->flags |= DRM_MODE_FLAG_PHSYNC;
> > > - if (dvo_val & DVO_VSYNC_ACTIVE_HIGH)
> > > - mode->flags |= DRM_MODE_FLAG_PVSYNC;
> > > - }
> > > - }
> > > + mode = intel_encoder_current_mode(encoder);
> >
> > Ok.
> >
> > > + if (mode) {
> > > + DRM_DEBUG_KMS("using current (BIOS) mode: ");
> > > + drm_mode_debug_printmodeline(mode);
> > > + mode->type |= DRM_MODE_TYPE_PREFERRED;
> > > }
> > >
> > > return mode;
> > > @@ -551,7 +534,7 @@ void intel_dvo_init(struct drm_i915_private *dev_priv)
> > > * mode being output through DVO.
> > > */
> > > intel_panel_init(&intel_connector->panel,
> > > - intel_dvo_get_current_mode(connector),
> > > + intel_dvo_get_current_mode(intel_encoder),
> > > NULL, NULL);
> > > intel_dvo->panel_wants_dither = true;
> > > }
> > > diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> > > index a55954a89148..c5072b951b9c 100644
> > > --- a/drivers/gpu/drm/i915/intel_lvds.c
> > > +++ b/drivers/gpu/drm/i915/intel_lvds.c
> > > @@ -939,10 +939,8 @@ void intel_lvds_init(struct drm_i915_private *dev_priv)
> > > struct drm_display_mode *fixed_mode = NULL;
> > > struct drm_display_mode *downclock_mode = NULL;
> > > struct edid *edid;
> > > - struct intel_crtc *crtc;
> > > i915_reg_t lvds_reg;
> > > u32 lvds;
> > > - int pipe;
> > > u8 pin;
> > > u32 allowed_scalers;
> > >
> > > @@ -1118,17 +1116,11 @@ void intel_lvds_init(struct drm_i915_private *dev_priv)
> > > if (HAS_PCH_SPLIT(dev_priv))
> > > goto failed;
> > >
> > > - pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
> > > - crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
> > > -
> > > - if (crtc && (lvds & LVDS_PORT_EN)) {
> > > - fixed_mode = intel_crtc_mode_get(dev, &crtc->base);
> > > - if (fixed_mode) {
> > > - DRM_DEBUG_KMS("using current (BIOS) mode: ");
> > > - drm_mode_debug_printmodeline(fixed_mode);
> > > - fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
> > > - goto out;
> > > - }
> > > + fixed_mode = intel_encoder_current_mode(intel_encoder);
> > > + if (fixed_mode) {
> > > + DRM_DEBUG_KMS("using current (BIOS) mode: ");
> > > + drm_mode_debug_printmodeline(fixed_mode);
> > > + fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
> > > }
> > >
> > > /* If we still don't have a mode after all that, give up. */
> >
> > Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk>
> >
> > I will give it a spin shortly (give or take compilation times on a slow
> > machine and forgetfulness).
>
> Compiled, booted, and lightly toasted,
> Tested-by: Chris Wilson <chris at chris-wilson.co.uk>
Cool. Thanks for checking again. Patch pushed to dinq.
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list