[Intel-gfx] [PATCH 0/9] drm/i915: Plane assert/readout cleanups etc.
Alex Villacis Lasso
alexvillacislasso at hotmail.com
Fri Oct 13 16:28:33 UTC 2017
El 11/10/17 a las 11:38, Ville Syrjälä escribió:
> On Wed, Oct 11, 2017 at 04:21:58PM +0000, Alex Villacis Lasso wrote:
>> El 11/10/17 a las 11:04, Ville Syrjala escribió:
>>> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>>>
>>> This series aims to clean up some of the plane state readout and
>>> sanitation, and clean up the enum plane mess a bit by renaming it
>>> to enum old_plane_id.
>>>
>>> The one actual bugfix here is the plane<->crtc sanitation
>>> change. Previously we tried to shut down the entire pipe when
>>> the plane mapping wasn't what we want, now we just shut down the
>>> plane, which is easier.
>>>
>>> Most of the other stuff is just polish, but I also decided to
>>> throw the gen2/3 and chv primary plane windowing support on on top
>>> just because it's been bugging me for years, and I was already
>>> in the neighbourhood.
>>>
>>> Series available here:
>>> git://github.com/vsyrjala/linux.git plane_sanitation_2
>>>
>>> Cc: Thierry Reding <thierry.reding at gmail.com>
>>> Cc: Alex Villacís Lasso <alexvillacislasso at hotmail.com>
>>>
>>> Ville Syrjälä (9):
>>> drm/i915: Add .get_hw_state() method for planes
>>> drm/i915: Redo plane sanitation during readout
>>> drm/i915: s/enum plane/enum old_plane_id/
>>> drm/i915: Use enum old_plane_id for the .get_fifo_size() hooks
>>> drm/i915: Cleanup enum pipe/enum plane_id/enum old_plane_id in initial
>>> fb readout
>>> drm/i915: Nuke ironlake_get_initial_plane_config()
>>> drm/i915: Switch fbc over to for_each_new_intel_plane_in_state()
>>> drm/i915: Nuke crtc->plane
>>> drm/i915: Add windowing for primary planes on gen2/3 and chv
>>>
>>> drivers/gpu/drm/i915/i915_drv.h | 16 +-
>>> drivers/gpu/drm/i915/intel_display.c | 500 +++++++++++++++--------------------
>>> drivers/gpu/drm/i915/intel_drv.h | 8 +-
>>> drivers/gpu/drm/i915/intel_fbc.c | 27 +-
>>> drivers/gpu/drm/i915/intel_pm.c | 36 +--
>>> drivers/gpu/drm/i915/intel_sprite.c | 43 +++
>>> 6 files changed, 299 insertions(+), 331 deletions(-)
>>>
>> Sorry if this sounds like a newbie question, but what kernel version should these two patches be applied against? Can they be applied on top of 4.13.5?
> Not sure they apply cleanly to something so old. In general we develop
> everything on top of 'git://anongit.freedesktop.org/drm-tip drm-tip' so
> that's where they would at least apply. But in that case it's actually
> easier to just grab my plane_sanitation_2 branch directly since it's
> sitting on top of the latest drm-tip.
>
> Hmm. Looks like only trivial conflicts when cherry-picking the first
> two patches onto 4.13.5. I pushed the result to here:
> git://github.com/vsyrjala/linux.git plane_sanitation_2_v4.13
> but note that I only compile tested it so it's still possible it won't
> actually work.
>
The plane_sanitation_2 branch fails to module_install on my Acer Aspire One. It complains at the DEPMOD stage that there is a circular dependency between drm and drm_kms_helper. I compiled using the configuration file from 4.13.5 and running "make
oldconfig" prior to building. Therefore I am unable to check whether the patchset fixes the situation in my machine. What is needed to track and possibly fix this situation?
More information about the Intel-gfx
mailing list