[Intel-gfx] [PATCH v2] drm/i915: Cancel the modeset retry work during modeset cleanup
Manasi Navare
manasi.d.navare at intel.com
Thu Oct 26 21:52:00 UTC 2017
During modeset cleanup on driver unload we may have a pending
hotplug work. This needs to be canceled early during the teardown
so that it does not fire after we have freed the connector.
We do this after drm_kms_helper_poll_fini(dev) since this might
trigger modeset retry work due to link retrain and before
intel_fbdev_fini() since this work requires the lock from fbdev.
If this is not done we may see something like:
DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock))
------------[ cut here ]------------
WARNING: CPU: 4 PID: 5010 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x4e/0x60
Modules linked in: i915(-) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm vgem ax88179_178
+a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e ptp pps_core prime_numbers i2c_hid
+[last unloaded: snd_hda_intel]
CPU: 4 PID: 5010 Comm: drv_module_relo Tainted: G U 4.14.0-rc3-CI-CI_DRM_3186+ #1
Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWX1.R00.X104.A03.1709140524 09/14/2017
task: ffff8803c827aa40 task.stack: ffffc90000520000
RIP: 0010:mutex_destroy+0x4e/0x60
RSP: 0018:ffffc90000523d58 EFLAGS: 00010292
RAX: 000000000000002a RBX: ffff88044fbef648 RCX: 0000000000000000
RDX: 0000000080000001 RSI: 0000000000000001 RDI: ffffffff810f0cf0
RBP: ffffc90000523d60 R08: 0000000000000001 R09: 0000000000000001
R10: 000000000f21cb81 R11: 0000000000000000 R12: ffff88044f71efc8
R13: ffffffffa02b3d20 R14: ffffffffa02b3d90 R15: ffff880459b29308
FS: 00007f5df4d6e8c0(0000) GS:ffff88045d300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055ec51f00a18 CR3: 0000000451782006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
drm_fb_helper_fini+0xd9/0x130
intel_fbdev_destroy+0x12/0x60 [i915]
intel_fbdev_fini+0x28/0x30 [i915]
intel_modeset_cleanup+0x45/0xa0 [i915]
i915_driver_unload+0x92/0x180 [i915]
i915_pci_remove+0x19/0x30 [i915]
i915_driver_unload+0x92/0x180 [i915]
i915_pci_remove+0x19/0x30 [i915]
pci_device_remove+0x39/0xb0
device_release_driver_internal+0x15d/0x220
driver_detach+0x40/0x80
bus_remove_driver+0x58/0xd0
driver_unregister+0x2c/0x40
pci_unregister_driver+0x36/0xb0
i915_exit+0x1a/0x8b [i915]
SyS_delete_module+0x18c/0x1e0
entry_SYSCALL_64_fastpath+0x1c/0xb1
RIP: 0033:0x7f5df3286287
RSP: 002b:00007fff8e107cc8 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: ffffffff81493a03 RCX: 00007f5df3286287
RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000564c7be02e48
RBP: ffffc90000523f88 R08: 0000000000000000 R09: 0000000000000080
R10: 00007f5df4d6e8c0 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff8e107eb0 R14: 0000000000000000 R15: 0000000000000000
Or a GPF like:
general protection fault: 0000 [#1] PREEMPT SMP
Modules linked in: i915(-) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm vgem ax88179_178
+a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e ptp pps_core prime_numbers i2c_hid
+[last unloaded: snd_hda_intel]
CPU: 0 PID: 82 Comm: kworker/0:1 Tainted: G U W 4.14.0-rc3-CI-CI_DRM_3186+ #1
Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWX1.R00.X104.A03.1709140524 09/14/2017
Workqueue: events intel_dp_modeset_retry_work_fn [i915]
task: ffff88045a5caa40 task.stack: ffffc90000378000
RIP: 0010:drm_setup_crtcs+0x143/0xbf0
RSP: 0018:ffffc9000037bd20 EFLAGS: 00010202
RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000002 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000780 RDI: 00000000ffffffff
RBP: ffffc9000037bdb8 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000780 R11: 0000000000000000 R12: 0000000000000002
R13: ffff88044fbef4e8 R14: 0000000000000780 R15: 0000000000000438
FS: 0000000000000000(0000) GS:ffff88045d200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055ec51ee5168 CR3: 000000044c89d003 CR4: 00000000003606f0
Call Trace:
drm_fb_helper_hotplug_event.part.18+0x7e/0xc0
drm_fb_helper_hotplug_event+0x1a/0x20
intel_fbdev_output_poll_changed+0x1a/0x20 [i915]
drm_kms_helper_hotplug_event+0x27/0x30
intel_dp_modeset_retry_work_fn+0x77/0x80 [i915]
process_one_work+0x233/0x660
worker_thread+0x206/0x3b0
kthread+0x152/0x190
? process_one_work+0x660/0x660
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x27/0x40
Code: 06 00 00 45 8b 45 20 31 db 45 31 e4 45 85 c0 0f 8e 91 06 00 00 44 8b 75 94 44 8b 7d 90 49 8b 45 28 49 63 d4 44 89 f6 41 83 c4 01 <48> 8b 04 d0 44
+89 fa 48 8b 38 48 8b 87 a8 01 00 00 ff 50 20 01
RIP: drm_setup_crtcs+0x143/0xbf0 RSP: ffffc9000037bd20
---[ end trace 08901ff1a77d30c7 ]---
v2:
* Rename it to intel_hpd_poll_fini() and call drm_kms_helper_fini() inside it
as the first step before cancel work (Chris Wilson)
* Add GPF trace in commit message and make the function static (Maarten Lankhorst)
Suggested-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Suggested-by: Chris Wilson <chris at chris-wilson.co.uk>
Fixes: 9301397a63b3 ("drm/i915: Implement Link Rate fallback on Link training failure")
Cc: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Tony Cheng <tony.cheng at amd.com>
Cc: Harry Wentland <Harry.wentland at amd.com>
Cc: Jani Nikula <jani.nikula at linux.intel.com>
Cc: Daniel Vetter <daniel.vetter at intel.com>
Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
Cc: Manasi Navare <manasi.d.navare at intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 0e493a1..1ffe7a4 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -15200,6 +15200,23 @@ void intel_connector_unregister(struct drm_connector *connector)
intel_panel_destroy_backlight(connector);
}
+static void intel_hpd_poll_fini(struct drm_device *dev)
+{
+ struct intel_connector *connector;
+ struct drm_connector_list_iter conn_iter;
+
+ /* Disable Polling */
+ drm_kms_helper_poll_fini(dev);
+
+ /* kill the modeset retry work after killing the polling */
+ drm_connector_list_iter_begin(dev, &conn_iter);
+ for_each_intel_connector_iter(connector, &conn_iter) {
+ if (connector->modeset_retry_work.func)
+ cancel_work_sync(&connector->modeset_retry_work);
+ }
+ drm_connector_list_iter_end(&conn_iter);
+}
+
void intel_modeset_cleanup(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
@@ -15219,8 +15236,10 @@ void intel_modeset_cleanup(struct drm_device *dev)
/*
* Due to the hpd irq storm handling the hotplug work can re-arm the
* poll handlers. Hence disable polling after hpd handling is shut down.
+ * Poll work can trigger the modeset retry work so Kill it
+ * after disabling the polling.
*/
- drm_kms_helper_poll_fini(dev);
+ intel_hpd_poll_fini(dev);
/* poll work can call into fbdev, hence clean that up afterwards */
intel_fbdev_fini(dev_priv);
--
2.1.4
More information about the Intel-gfx
mailing list