[Intel-gfx] [PATCH] drm/i915: Fix DPLL warning when starting guest VM

Ville Syrjälä ville.syrjala at linux.intel.com
Mon Oct 30 15:14:14 UTC 2017


On Mon, Oct 30, 2017 at 03:49:28PM +0200, Ville Syrjälä wrote:
> On Mon, Oct 30, 2017 at 04:17:06PM +0800, Zhao, Xinda wrote:
> > The warning is occurred in guest VM when trying to get clock in encoder
> > initialization.

What does guest VM mean here? gvt? If so, why do you claim to have
an enabled port without an enabled pipe?

> > 
> > intel_modeset_init()
> >   ->intel_modeset_setup_hw_state()
> >     ->intel_ddi_get_config()
> >       ->intel_ddi_clock_get()
> >         ->skl_ddi_clock_get()
> >           ->intel_get_shared_dpll_id()
> >             ->WARN_ON(pll < dev_priv->shared_dplls||
> >                 pll > &dev_priv->shared_dplls[dev_priv->num_shared_dpll])
> > 
> > In encoder initialization, shared DPLL is used for calculating clock for
> > DDI ports, but it is not set when crtc is not active.
> > In some cases, encoder is enabled while crtc is disabled, during encoder
> > initialization, the warning occurred.
> > 
> > Signed-off-by: Zhao, Xinda <xinda.zhao at intel.com>
> > ---
> >  drivers/gpu/drm/i915/intel_ddi.c | 10 ++++++++++
> >  1 file changed, 10 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> > index 28c25cb..ef35c12 100644
> > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > @@ -1489,6 +1489,16 @@ void intel_ddi_clock_get(struct intel_encoder *encoder,
> >  			 struct intel_crtc_state *pipe_config)
> >  {
> >  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > +	struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
> > +
> > +	/*
> > +	 * For DDI ports we always use a shared PLL.
> > +	 * But the shared PLL will not be set when crtc is not active.
> > +	 */
> > +	if (crtc->active == false) {
> 
> Seem to me that the correct fix would be to do the DPLL readout
> regardless of the state of the pipe.
> 
> > +		DRM_DEBUG_KMS("Trying to get clock, but pipe is not active.\n");
> > +		return;
> > +	}
> >  
> >  	if (INTEL_GEN(dev_priv) <= 8)
> >  		hsw_ddi_clock_get(encoder, pipe_config);
> > -- 
> > 2.7.4
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> -- 
> Ville Syrjälä
> Intel OTC

-- 
Ville Syrjälä
Intel OTC


More information about the Intel-gfx mailing list