[Intel-gfx] [PATCH v2 1/2] drm/dp: Bit definition for D3 power state that keeps AUX fully powered

Jani Nikula jani.nikula at linux.intel.com
Mon Oct 30 15:32:51 UTC 2017


On Fri, 27 Oct 2017, Ville Syrjälä <ville.syrjala at linux.intel.com> wrote:
> On Fri, Oct 27, 2017 at 01:25:01PM +0300, Jani Nikula wrote:
>> On Mon, 14 Aug 2017, Harry Wentland <harry.wentland at amd.com> wrote:
>> > On 2017-08-11 02:10 PM, Dhinakaran Pandiyan wrote:
>> >> DPCD 600h - SET_POWER & SET_DP_PWR_VOLTAGE defines power state
>> >> 
>> >> 101 = Set Main-Link for local Sink device and all downstream Sink
>> >> devices to D3 (power-down mode), keep AUX block fully powered, ready to
>> >> reply within a Response Timeout period of 300us.
>> >> 
>> >> This state is useful in a MST dock + MST monitor configuration that
>> >> doesn't wake up from D3 state.
>> >> 
>> >> v2: Use spaces instead of tabs (Jani)
>> >> 
>> >> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
>> >
>> > Reviewed-by: Harry Wentland <harry.wentland at amd.com>
>> 
>> Pushed this one to drm-misc-next, thanks for the patch and review, and
>> sorry for the delay.
>
> Sorry to start reviewing after this got pushed, but...
>
>> 
>> BR,
>> Jani.
>> 
>> >
>> > Harry
>> >
>> >> ---
>> >>  include/drm/drm_dp_helper.h | 1 +
>> >>  1 file changed, 1 insertion(+)
>> >> 
>> >> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
>> >> index b17476a..47a6cdb 100644
>> >> --- a/include/drm/drm_dp_helper.h
>> >> +++ b/include/drm/drm_dp_helper.h
>> >> @@ -618,6 +618,7 @@
>> >>  # define DP_SET_POWER_D0                    0x1
>> >>  # define DP_SET_POWER_D3                    0x2
>> >>  # define DP_SET_POWER_MASK                  0x3
>
> This mask doesn't cover the "aux" bit. I guess it's a purely theoretical
> concern at this point since the device should start out in D0 when
> first plugged in.
>
> Also IIRC this stuff was added in DPCD 1.2. We might want a comment to
> reflect that fact.

Okay, the damage is done, someone(tm) please send fixup patches on top
to make it right.

BR,
Jani.



>
>> >> +# define DP_SET_POWER_D3_AUX_ON             0x5
>> >>  
>> >>  #define DP_EDP_DPCD_REV			    0x700    /* eDP 1.2 */
>> >>  # define DP_EDP_11			    0x00
>> >> 
>> > _______________________________________________
>> > Intel-gfx mailing list
>> > Intel-gfx at lists.freedesktop.org
>> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>> 
>> -- 
>> Jani Nikula, Intel Open Source Technology Center
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Jani Nikula, Intel Open Source Technology Center


More information about the Intel-gfx mailing list