[Intel-gfx] [PATCH v5 2/6] drm/i915: Stop frobbing with DDI encoder->type
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Mon Oct 30 16:29:13 UTC 2017
Op 30-10-17 om 17:07 schreef Ville Syrjälä:
> On Mon, Oct 30, 2017 at 09:59:29AM +0100, Maarten Lankhorst wrote:
>> Op 27-10-17 om 21:31 schreef Ville Syrjala:
>>> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>>>
>>> Currently the DDI encoder->type will change at runtime depending on
>>> what kind of hotplugs we've processed. That's quite bad since we can't
>>> really trust that that current value of encoder->type actually matches
>>> the type of signal we're trying to drive through it.
>>>
>>> Let's eliminate that problem by declaring that non-eDP DDI port will
>>> always have the encoder type as INTEL_OUTPUT_DDI. This means the code
>>> can no longer try to distinguish DP vs. HDMI based on encoder->type.
>>> We'll leave eDP as INTEL_OUTPUT_EDP, since it'll never change and
>>> there's a bunch of code that relies on that value to identify eDP
>>> encoders.
>>>
>>> We'll introduce a new encoder .compute_output_type() hook. This allows
>>> us to compute the full output_types before any encoder .compute_config()
>>> hooks get called, thus those hooks can rely on output_types being
>>> correct, which is useful for cloning on oldr platforms. For now we'll
>>> just look at the connector type and pick the correct mode based on that.
>>> In the future the new hook could be used to implement dynamic switching
>>> between LS and PCON modes for LSPCON.
>>>
>>> v2: Fix BXT/GLK PPS explosion with DSI/MST encoders
>>> v3: Avoid the PPS warn on pure HDMI/DVI DDI encoders by checking dp.output_reg
>>> v4: Rebase
>>> v5: Populate output_types in .get_config() rather than in the caller
>>> v5: Split out populating output_types in .get_config() (Maarten)
>>>
>>> Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
>>> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
>>> ---
>>> drivers/gpu/drm/i915/i915_debugfs.c | 2 +-
>>> drivers/gpu/drm/i915/intel_ddi.c | 32 ++++++++++++++++++++++++--------
>>> drivers/gpu/drm/i915/intel_display.c | 11 ++++++++---
>>> drivers/gpu/drm/i915/intel_dp.c | 19 ++++++-------------
>>> drivers/gpu/drm/i915/intel_drv.h | 7 +++++--
>>> drivers/gpu/drm/i915/intel_hdmi.c | 10 ++--------
>>> drivers/gpu/drm/i915/intel_opregion.c | 2 +-
>>> 7 files changed, 47 insertions(+), 36 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
>>> index c1e5bba91bff..39883cd915db 100644
>>> --- a/drivers/gpu/drm/i915/i915_debugfs.c
>>> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
>>> @@ -3051,7 +3051,7 @@ static void intel_connector_info(struct seq_file *m,
>>> break;
>>> case DRM_MODE_CONNECTOR_HDMIA:
>>> if (intel_encoder->type == INTEL_OUTPUT_HDMI ||
>>> - intel_encoder->type == INTEL_OUTPUT_UNKNOWN)
>>> + intel_encoder->type == INTEL_OUTPUT_DDI)
>>> intel_hdmi_info(m, intel_connector);
>>> break;
>>> default:
>>> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
>>> index 7e0b1a02912a..e5dd281781fe 100644
>>> --- a/drivers/gpu/drm/i915/intel_ddi.c
>>> +++ b/drivers/gpu/drm/i915/intel_ddi.c
>>> @@ -497,10 +497,8 @@ enum port intel_ddi_get_encoder_port(struct intel_encoder *encoder)
>>> switch (encoder->type) {
>>> case INTEL_OUTPUT_DP_MST:
>>> return enc_to_mst(&encoder->base)->primary->port;
>>> - case INTEL_OUTPUT_DP:
>>> case INTEL_OUTPUT_EDP:
>>> - case INTEL_OUTPUT_HDMI:
>>> - case INTEL_OUTPUT_UNKNOWN:
>>> + case INTEL_OUTPUT_DDI:
>>> return enc_to_dig_port(&encoder->base)->port;
>>> case INTEL_OUTPUT_ANALOG:
>>> return PORT_E;
>>> @@ -1534,6 +1532,7 @@ void intel_ddi_set_vc_payload_alloc(const struct intel_crtc_state *crtc_state,
>>> struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
>>> enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
>>> uint32_t temp;
>>> +
>>> temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
>>> if (state == true)
>>> temp |= TRANS_DDI_DP_VC_PAYLOAD_ALLOC;
>>> @@ -2652,21 +2651,36 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
>>> intel_ddi_compute_min_voltage_level(dev_priv, pipe_config);
>>> }
>>>
>>> +static enum intel_output_type
>>> +intel_ddi_compute_output_type(struct intel_encoder *encoder,
>>> + struct intel_crtc_state *crtc_state,
>>> + struct drm_connector_state *conn_state)
>>> +{
>>> + switch (conn_state->connector->connector_type) {
>>> + case DRM_MODE_CONNECTOR_HDMIA:
>>> + return INTEL_OUTPUT_HDMI;
>>> + case DRM_MODE_CONNECTOR_eDP:
>>> + return INTEL_OUTPUT_EDP;
>>> + case DRM_MODE_CONNECTOR_DisplayPort:
>>> + return INTEL_OUTPUT_DP;
>>> + default:
>>> + MISSING_CASE(conn_state->connector->connector_type);
>>> + return INTEL_OUTPUT_UNUSED;
>>> + }
>>> +}
>>> +
>>> static bool intel_ddi_compute_config(struct intel_encoder *encoder,
>>> struct intel_crtc_state *pipe_config,
>>> struct drm_connector_state *conn_state)
>>> {
>>> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>>> - int type = encoder->type;
>>> int port = intel_ddi_get_encoder_port(encoder);
>>> int ret;
>>>
>>> - WARN(type == INTEL_OUTPUT_UNKNOWN, "compute_config() on unknown output!\n");
>>> -
>>> if (port == PORT_A)
>>> pipe_config->cpu_transcoder = TRANSCODER_EDP;
>>>
>>> - if (type == INTEL_OUTPUT_HDMI)
>>> + if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI))
>>> ret = intel_hdmi_compute_config(encoder, pipe_config, conn_state);
>>> else
>>> ret = intel_dp_compute_config(encoder, pipe_config, conn_state);
>> Would it be an option to put it in compute_config for DDI only? There is no risk of cloning there, saves another hook. :)
> That would mean the caller would set 'output_types|=DDI' which we'd have
> to undo here, or we would need to special case DDI in the caller and not
> set output_types there at all. Neither would look very pretty I think.
Something like:
/* There is no 1 to 1 mapping for DDI, it's set in compute_config()
if (type != DDI)
output_types |= BIT(type)
would work for me. :)
>> Either way is fine though.
>>> @@ -2815,6 +2829,7 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>>> drm_encoder_init(&dev_priv->drm, encoder, &intel_ddi_funcs,
>>> DRM_MODE_ENCODER_TMDS, "DDI %c", port_name(port));
>>>
>>> + intel_encoder->compute_output_type = intel_ddi_compute_output_type;
>>> intel_encoder->compute_config = intel_ddi_compute_config;
>>> intel_encoder->enable = intel_enable_ddi;
>>> if (IS_GEN9_LP(dev_priv))
>>> @@ -2868,9 +2883,10 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>>> max_lanes = 4;
>>> }
>>>
>>> + intel_dig_port->dp.output_reg = INVALID_MMIO_REG;
>>> intel_dig_port->max_lanes = max_lanes;
>>>
>>> - intel_encoder->type = INTEL_OUTPUT_UNKNOWN;
>>> + intel_encoder->type = INTEL_OUTPUT_DDI;
>>> intel_encoder->power_domain = intel_port_to_power_domain(port);
>>> intel_encoder->port = port;
>>> intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
>>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>>> index 8f769e9b9342..737de251d0f8 100644
>>> --- a/drivers/gpu/drm/i915/intel_display.c
>>> +++ b/drivers/gpu/drm/i915/intel_display.c
>>> @@ -10579,7 +10579,7 @@ static const char * const output_type_str[] = {
>>> OUTPUT_TYPE(DP),
>>> OUTPUT_TYPE(EDP),
>>> OUTPUT_TYPE(DSI),
>>> - OUTPUT_TYPE(UNKNOWN),
>>> + OUTPUT_TYPE(DDI),
>>> OUTPUT_TYPE(DP_MST),
>>> };
>>>
>>> @@ -10750,7 +10750,7 @@ static bool check_digital_port_conflicts(struct drm_atomic_state *state)
>>>
>>> switch (encoder->type) {
>>> unsigned int port_mask;
>>> - case INTEL_OUTPUT_UNKNOWN:
>>> + case INTEL_OUTPUT_DDI:
>>> if (WARN_ON(!HAS_DDI(to_i915(dev))))
>>> break;
>>> case INTEL_OUTPUT_DP:
>>> @@ -10883,7 +10883,12 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
>>> * Determine output_types before calling the .compute_config()
>>> * hooks so that the hooks can use this information safely.
>>> */
>>> - pipe_config->output_types |= 1 << encoder->type;
>>> + if (encoder->compute_output_type)
>>> + pipe_config->output_types |=
>>> + BIT(encoder->compute_output_type(encoder, pipe_config,
>>> + connector_state));
>>> + else
>>> + pipe_config->output_types |= BIT(encoder->type);
>>> }
>>>
>>> encoder_retry:
>>> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
>>> index 30688a5d680d..f0c49962ffbe 100644
>>> --- a/drivers/gpu/drm/i915/intel_dp.c
>>> +++ b/drivers/gpu/drm/i915/intel_dp.c
>>> @@ -758,11 +758,16 @@ void intel_power_sequencer_reset(struct drm_i915_private *dev_priv)
>>> struct intel_dp *intel_dp;
>>>
>>> if (encoder->type != INTEL_OUTPUT_DP &&
>>> - encoder->type != INTEL_OUTPUT_EDP)
>>> + encoder->type != INTEL_OUTPUT_EDP &&
>>> + encoder->type != INTEL_OUTPUT_DDI)
>>> continue;
>>>
>>> intel_dp = enc_to_intel_dp(&encoder->base);
>>>
>>> + /* Skip pure DVI/HDMI DDI encoders */
>>> + if (!i915_mmio_reg_valid(intel_dp->output_reg))
>>> + continue;
>>> +
>>> WARN_ON(intel_dp->active_pipe != INVALID_PIPE);
>>>
>>> if (encoder->type != INTEL_OUTPUT_EDP)
>>> @@ -4733,8 +4738,6 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
>>> {
>>> struct drm_connector *connector = &intel_connector->base;
>>> struct intel_dp *intel_dp = intel_attached_dp(connector);
>>> - struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
>>> - struct intel_encoder *intel_encoder = &intel_dig_port->base;
>>> struct drm_device *dev = connector->dev;
>>> enum drm_connector_status status;
>>> u8 sink_irq_vector = 0;
>>> @@ -4767,9 +4770,6 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
>>> goto out;
>>> }
>>>
>>> - if (intel_encoder->type != INTEL_OUTPUT_EDP)
>>> - intel_encoder->type = INTEL_OUTPUT_DP;
>>> -
>>> if (intel_dp->reset_link_params) {
>>> /* Initial max link lane count */
>>> intel_dp->max_link_lane_count = intel_dp_max_common_lane_count(intel_dp);
>>> @@ -4886,9 +4886,6 @@ intel_dp_force(struct drm_connector *connector)
>>> intel_dp_set_edid(intel_dp);
>>>
>>> intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
>>> -
>>> - if (intel_encoder->type != INTEL_OUTPUT_EDP)
>>> - intel_encoder->type = INTEL_OUTPUT_DP;
>>> }
>>>
>>> static int intel_dp_get_modes(struct drm_connector *connector)
>>> @@ -5107,10 +5104,6 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
>>> struct drm_i915_private *dev_priv = to_i915(dev);
>>> enum irqreturn ret = IRQ_NONE;
>>>
>>> - if (intel_dig_port->base.type != INTEL_OUTPUT_EDP &&
>>> - intel_dig_port->base.type != INTEL_OUTPUT_HDMI)
>>> - intel_dig_port->base.type = INTEL_OUTPUT_DP;
>>> -
>>> if (long_hpd && intel_dig_port->base.type == INTEL_OUTPUT_EDP) {
>>> /*
>>> * vdd off can generate a long pulse on eDP which
>>> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
>>> index df966427232c..629ebc73bb09 100644
>>> --- a/drivers/gpu/drm/i915/intel_drv.h
>>> +++ b/drivers/gpu/drm/i915/intel_drv.h
>>> @@ -173,7 +173,7 @@ enum intel_output_type {
>>> INTEL_OUTPUT_DP = 7,
>>> INTEL_OUTPUT_EDP = 8,
>>> INTEL_OUTPUT_DSI = 9,
>>> - INTEL_OUTPUT_UNKNOWN = 10,
>>> + INTEL_OUTPUT_DDI = 10,
>>> INTEL_OUTPUT_DP_MST = 11,
>>> };
>>>
>>> @@ -216,6 +216,9 @@ struct intel_encoder {
>>> enum port port;
>>> unsigned int cloneable;
>>> void (*hot_plug)(struct intel_encoder *);
>>> + enum intel_output_type (*compute_output_type)(struct intel_encoder *,
>>> + struct intel_crtc_state *,
>>> + struct drm_connector_state *);
>>> bool (*compute_config)(struct intel_encoder *,
>>> struct intel_crtc_state *,
>>> struct drm_connector_state *);
>>> @@ -1152,7 +1155,7 @@ enc_to_dig_port(struct drm_encoder *encoder)
>>> struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
>>>
>>> switch (intel_encoder->type) {
>>> - case INTEL_OUTPUT_UNKNOWN:
>>> + case INTEL_OUTPUT_DDI:
>>> WARN_ON(!HAS_DDI(to_i915(encoder->dev)));
>>> case INTEL_OUTPUT_DP:
>>> case INTEL_OUTPUT_EDP:
>>> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
>>> index 97d08cda3f8e..dede2898cb8a 100644
>>> --- a/drivers/gpu/drm/i915/intel_hdmi.c
>>> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
>>> @@ -1617,12 +1617,9 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
>>>
>>> intel_hdmi_unset_edid(connector);
>>>
>>> - if (intel_hdmi_set_edid(connector)) {
>>> - struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
>>> -
>>> - hdmi_to_dig_port(intel_hdmi)->base.type = INTEL_OUTPUT_HDMI;
>>> + if (intel_hdmi_set_edid(connector))
>>> status = connector_status_connected;
>>> - } else
>>> + else
>>> status = connector_status_disconnected;
>>>
>>> intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS);
>>> @@ -1633,8 +1630,6 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
>>> static void
>>> intel_hdmi_force(struct drm_connector *connector)
>>> {
>>> - struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
>>> -
>>> DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
>>> connector->base.id, connector->name);
>>>
>>> @@ -1644,7 +1639,6 @@ intel_hdmi_force(struct drm_connector *connector)
>>> return;
>>>
>>> intel_hdmi_set_edid(connector);
>>> - hdmi_to_dig_port(intel_hdmi)->base.type = INTEL_OUTPUT_HDMI;
>>> }
>>>
>>> static int intel_hdmi_get_modes(struct drm_connector *connector)
>>> diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
>>> index 1d946240e55f..39714be3eb6b 100644
>>> --- a/drivers/gpu/drm/i915/intel_opregion.c
>>> +++ b/drivers/gpu/drm/i915/intel_opregion.c
>>> @@ -383,7 +383,7 @@ int intel_opregion_notify_encoder(struct intel_encoder *intel_encoder,
>>> case INTEL_OUTPUT_ANALOG:
>>> type = DISPLAY_TYPE_CRT;
>>> break;
>>> - case INTEL_OUTPUT_UNKNOWN:
>>> + case INTEL_OUTPUT_DDI:
>>> case INTEL_OUTPUT_DP:
>>> case INTEL_OUTPUT_HDMI:
>>> case INTEL_OUTPUT_DP_MST:
More information about the Intel-gfx
mailing list