[Intel-gfx] [PATCH v2] drm/i915: Increase poll time for BDW FCLK_DONE

[Marta Lofstedt]

During IGT testing it has been shown that the specification
defined polling time of 1 us for FCLK_DONE, is sometimes not
enough. The issue is still reproducible while disabling
C-states through the PM QoS framework and also while disabling
preemtion. From this the most plausible explanation is that the
issue is due to a firmware flaw.
As a workaround, it is better to wait a little bit longer for
the FCLK_DONE to come around, than to leave with an DRM_ERROR
and having FCLK_DONE at a randome time after.
While spinning a list of igt tests prone to reproduce the issue
the FCLK_DONE poll failed at approximately 2% of the invocations
of the bdw_set_cdclk function. The longest poll time during this
testing was measured to ~7us. So, the suggested new poll time of
100us is on the safe side.

v2: Added more documentation about investigations done.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102243
Signed-off-by: Marta Lofstedt <marta.lofstedt at intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/intel_cdclk.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index d32911816fc2..f89232e0f6fa 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -669,8 +669,11 @@ static void bdw_set_cdclk(struct drm_i915_private *dev_priv,
 	val |= LCPLL_CD_SOURCE_FCLK;
 	I915_WRITE(LCPLL_CTL, val);
 
+	/* According to the spec, it should be enough to poll for this 1 us.
+	 * However, extensive testing shows that this can take longer.
+	 */
 	if (wait_for_us(I915_READ(LCPLL_CTL) &
-			LCPLL_CD_SOURCE_FCLK_DONE, 1))
+			LCPLL_CD_SOURCE_FCLK_DONE, 100))
 		DRM_ERROR("Switching to FCLK failed\n");
 
 	val = I915_READ(LCPLL_CTL);
-- 
2.11.0