[Intel-gfx] [PATCH v2] drm/i915/mst: Use MST sideband message transactions for dpms control

[Dhinakaran Pandiyan]

Use the POWER_DOWN_PHY and POWER_UP_PHY sideband message transactions to
set power states for downstream sinks. Apart from giving us the ability
to set power state for individual sinks, this fixes the below test for
me.

$ xrandr --display :0 --output DP-2-2-8 --off
$ xrandr --display :0 --output DP-2-2-1 --off
$ xrandr --display :0 --output DP-2-2-8 --auto #Black screen
$ xrandr --display :0 --output DP-2-2-1 --auto

v2: Modify and document the dpms and port disable order (Ville)
    Add comment explaining is_mst = !crtc_state equivalence(Ville, Maarten)

Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Lyude <lyude at redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
---
 drivers/gpu/drm/i915/intel_ddi.c    | 18 ++++++++++++++----
 drivers/gpu/drm/i915/intel_dp_mst.c | 13 +++++++++----
 2 files changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 1da3bb2cc4b4..0053d66393f8 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -2161,7 +2161,8 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
 		intel_prepare_dp_ddi_buffers(encoder);
 
 	intel_ddi_init_dp_buf_reg(encoder);
-	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+	if (!link_mst)
+		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
 	intel_dp_start_link_train(intel_dp);
 	if (port != PORT_A || INTEL_GEN(dev_priv) >= 9)
 		intel_dp_stop_link_train(intel_dp);
@@ -2235,12 +2236,21 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder,
 	uint32_t val;
 	bool wait = false;
 
-	/* old_crtc_state and old_conn_state are NULL when called from DP_MST */
-
 	if (type == INTEL_OUTPUT_DP || type == INTEL_OUTPUT_EDP) {
+		/*
+		 * old_crtc_state and old_conn_state are NULL when called from
+		 * DP_MST. The main connector associated with this port is never
+		 * bound to a crtc for MST.
+		 */
+		bool is_mst = !old_crtc_state;
 		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 
-		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
+		/*
+		 * Power down sink before disabling the port, otherwise we end
+		 * up getting interrupts from the sink on detecting link loss.
+		 */
+		if (!is_mst)
+			intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
 	}
 
 	val = I915_READ(DDI_BUF_CTL(port));
diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
index 8e3aad0ea60b..187f3f05a828 100644
--- a/drivers/gpu/drm/i915/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/intel_dp_mst.c
@@ -164,15 +164,19 @@ static void intel_mst_post_disable_dp(struct intel_encoder *encoder,
 
 	drm_dp_mst_deallocate_vcpi(&intel_dp->mst_mgr, connector->port);
 
+	/*
+	 * Power down mst path before disabling the port, otherwise we end
+	 * up getting interrupts from the sink upon detecting link loss.
+	 */
+	drm_dp_send_power_updown_phy(&intel_dp->mst_mgr, connector->port,
+				     false);
+
 	intel_dp->active_mst_links--;
 
 	intel_mst->connector = NULL;
-	if (intel_dp->active_mst_links == 0) {
+	if (intel_dp->active_mst_links == 0)
 		intel_dig_port->base.post_disable(&intel_dig_port->base,
 						  NULL, NULL);
-
-		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
-	}
 }
 
 static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,
@@ -197,6 +201,7 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,
 
 	DRM_DEBUG_KMS("%d\n", intel_dp->active_mst_links);
 
+	drm_dp_send_power_updown_phy(&intel_dp->mst_mgr, connector->port, true);
 	if (intel_dp->active_mst_links == 0)
 		intel_dig_port->base.pre_enable(&intel_dig_port->base,
 						pipe_config, NULL);
-- 
2.11.0