[Intel-gfx] [PATCH 5/9] drm/i915/dp: Remove intel_dp->is_mst check in intel_dp_check_mst_status
Pandiyan, Dhinakaran
dhinakaran.pandiyan at intel.com
Wed Sep 13 20:13:16 UTC 2017
On Wed, 2017-09-13 at 12:32 +0300, Jani Nikula wrote:
> On Tue, 12 Sep 2017, Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com> wrote:
> > There is just only one caller now, which already checks for
> > intel_dp->is_mst. So, remove this and fix some braces while at it.
> >
> > Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_dp.c | 85 ++++++++++++++++++++---------------------
> > 1 file changed, 42 insertions(+), 43 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index b3d95cb7546b..3f2ca10ccbcd 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -4192,57 +4192,56 @@ static int
> > intel_dp_check_mst_status(struct intel_dp *intel_dp)
> > {
> > bool bret;
> > + u8 esi[DP_DPRX_ESI_LEN] = { 0 };
> > + int ret = 0;
> > + int retry;
> > + bool handled;
> >
> > - if (intel_dp->is_mst) {
> > - u8 esi[DP_DPRX_ESI_LEN] = { 0 };
> > - int ret = 0;
> > - int retry;
> > - bool handled;
> > - bret = intel_dp_get_sink_irq_esi(intel_dp, esi);
> > + bret = intel_dp_get_sink_irq_esi(intel_dp, esi);
> > go_again:
> > - if (bret == true) {
> > -
> > - /* check link status - esi[10] = 0x200c */
>
> Drive-by observation unrelated to this patch: 0x200c isn't even defined
> in drm_dp_helper.h... care to add that, please?
Sure.
>
> BR,
> Jani.
>
> > - if (intel_dp->active_mst_links &&
> > - !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
> > - DRM_DEBUG_KMS("channel EQ not ok, retraining\n");
> > - intel_dp_start_link_train(intel_dp);
> > - intel_dp_stop_link_train(intel_dp);
> > - }
> > + if (bret == true) {
> > +
> > + /* check link status - esi[10] = 0x200c */
> > + if (intel_dp->active_mst_links &&
> > + !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
> > + DRM_DEBUG_KMS("channel EQ not ok, retraining\n");
> > + intel_dp_start_link_train(intel_dp);
> > + intel_dp_stop_link_train(intel_dp);
> > + }
> >
> > - DRM_DEBUG_KMS("got esi %3ph\n", esi);
> > - ret = drm_dp_mst_hpd_irq(&intel_dp->mst_mgr, esi, &handled);
> > -
> > - if (handled) {
> > - for (retry = 0; retry < 3; retry++) {
> > - int wret;
> > - wret = drm_dp_dpcd_write(&intel_dp->aux,
> > - DP_SINK_COUNT_ESI+1,
> > - &esi[1], 3);
> > - if (wret == 3) {
> > - break;
> > - }
> > - }
> > + DRM_DEBUG_KMS("got esi %3ph\n", esi);
> > + ret = drm_dp_mst_hpd_irq(&intel_dp->mst_mgr, esi, &handled);
> >
> > - bret = intel_dp_get_sink_irq_esi(intel_dp, esi);
> > - if (bret == true) {
> > - DRM_DEBUG_KMS("got esi2 %3ph\n", esi);
> > - goto go_again;
> > - }
> > - } else
> > - ret = 0;
> > + if (handled) {
> > + for (retry = 0; retry < 3; retry++) {
> > + int wret;
> >
> > - return ret;
> > + wret = drm_dp_dpcd_write(&intel_dp->aux,
> > + DP_SINK_COUNT_ESI+1,
> > + &esi[1], 3);
> > + if (wret == 3)
> > + break;
> > + }
> > +
> > + bret = intel_dp_get_sink_irq_esi(intel_dp, esi);
> > + if (bret == true) {
> > + DRM_DEBUG_KMS("got esi2 %3ph\n", esi);
> > + goto go_again;
> > + }
> > } else {
> > - struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > - DRM_DEBUG_KMS("failed to get ESI - device may have failed\n");
> > - intel_dp->is_mst = false;
> > - drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, intel_dp->is_mst);
> > - /* send a hotplug event */
> > - drm_kms_helper_hotplug_event(intel_dig_port->base.base.dev);
> > + ret = 0;
> > }
> > + } else {
> > + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > +
> > + DRM_DEBUG_KMS("failed to get ESI - device may have failed\n");
> > + intel_dp->is_mst = false;
> > + drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
> > + intel_dp->is_mst);
> > + drm_kms_helper_hotplug_event(intel_dig_port->base.base.dev);
> > + ret = -EINVAL;
> > }
> > - return -EINVAL;
> > + return ret;
> > }
> >
> > static void
>
More information about the Intel-gfx
mailing list