[Intel-gfx] [PATCH 2/2] drm/i915/psr/cnl: Set y-coordinate as valid in SDP

[Pandiyan, Dhinakaran]

On Sat, 2018-03-31 at 00:17 +0000, Souza, Jose wrote:
> On Fri, 2018-03-30 at 16:46 -0700, Pandiyan, Dhinakaran wrote:
> > On Fri, 2018-03-30 at 14:15 -0700, José Roberto de Souza wrote:
> > > This was my bad, spec says that the name of this bit is
> > > 'Y-coordinate valid' but the values for it is:
> > > 0: Include Y-coordinate valid eDP1.4a
> > > 1: Do not include Y-coordinate valid eDP 1.4
> > > So renaming the bit and not setting it.
> > > 
> > > Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> > > Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/i915_reg.h  | 2 +-
> > >  drivers/gpu/drm/i915/intel_psr.c | 5 ++---
> > >  2 files changed, 3 insertions(+), 4 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > > b/drivers/gpu/drm/i915/i915_reg.h
> > > index 176dca6554f4..19429cb1f3a7 100644
> > > --- a/drivers/gpu/drm/i915/i915_reg.h
> > > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > > @@ -4058,7 +4058,7 @@ enum {
> > >  #define EDP_PSR2_CTL			_MMIO(0x6f900)
> > >  #define   EDP_PSR2_ENABLE		(1<<31)
> > >  #define   EDP_SU_TRACK_ENABLE		(1<<30)
> > > -#define   EDP_Y_COORDINATE_VALID	(1<<26) /* GLK and CNL+ */
> > > +#define   EDP_Y_COORDINATE_INVALID	(1<<26) /* GLK and CNL+
> > > */
> > 
> > INVALID isn't the same as asking the source to not send the y-
> > coordinate
> > valid bit. Sorry to be pedantic, please leave the definition as it
> > is.
> 
> I agree with you, if it don't need to send the y-coordinate is
> better just not set EDP_Y_COORDINATE_ENABLE but leave the bit
> definition name as it is, is prone to others do the same error as I
> did.
> 

I'll let Rodrigo take a call on this one.

-DK

> > 
> > Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com> if
> > you
> > remove this hunk.
> > 
> > >  #define   EDP_Y_COORDINATE_ENABLE	(1<<25) /* GLK and CNL+
> > > */
> > >  #define   EDP_MAX_SU_DISABLE_TIME(t)	((t)<<20)
> > >  #define   EDP_MAX_SU_DISABLE_TIME_MASK	(0x1f<<20)
> > > diff --git a/drivers/gpu/drm/i915/intel_psr.c
> > > b/drivers/gpu/drm/i915/intel_psr.c
> > > index 2d53f7398a6d..f12111438bcf 100644
> > > --- a/drivers/gpu/drm/i915/intel_psr.c
> > > +++ b/drivers/gpu/drm/i915/intel_psr.c
> > > @@ -400,9 +400,8 @@ static void hsw_activate_psr2(struct intel_dp
> > > *intel_dp)
> > >  	 * mesh at all with our frontbuffer tracking. And the hw
> > > alone isn't
> > >  	 * good enough. */
> > >  	val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
> > > -	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
> > > {
> > > -		val |= EDP_Y_COORDINATE_VALID |
> > > EDP_Y_COORDINATE_ENABLE;
> > > -	}
> > > +	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
> > > +		val |= EDP_Y_COORDINATE_ENABLE;
> > >  
> > >  	val |= EDP_PSR2_FRAME_BEFORE_SU(dev_priv-
> > > >psr.sink_sync_latency + 1);
> > >  
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx