[Intel-gfx] [PATCH 3/3] drm/i915/icl: update ddb entry start/end mask during hw ddb readout
Mahesh Kumar
mahesh1.kumar at intel.com
Thu Apr 5 06:00:19 UTC 2018
Gen11/ICL onward ddb entry start/end mask is increased from 10 bits to
11 bits. This patch make changes to use proper mask for ICL+ during
hardware ddb value readout.
Changes since V1:
- Use _MASK & _SHIFT macro (James)
Signed-off-by: Mahesh Kumar <mahesh1.kumar at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 3 +++
drivers/gpu/drm/i915/intel_pm.c | 18 ++++++++++++++----
2 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 176dca6554f4..e3a6c535617d 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6459,6 +6459,9 @@ enum {
#define _PLANE_BUF_CFG_1_B 0x7127c
#define _PLANE_BUF_CFG_2_B 0x7137c
+#define SKL_DDB_ENTRY_MASK 0x3FF
+#define ICL_DDB_ENTRY_MASK 0x7FF
+#define DDB_ENTRY_END_SHIFT 16
#define _PLANE_BUF_CFG_1(pipe) \
_PIPE(pipe, _PLANE_BUF_CFG_1_A, _PLANE_BUF_CFG_1_B)
#define _PLANE_BUF_CFG_2(pipe) \
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index caa29f949335..98e91f4a5ab4 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3864,10 +3864,18 @@ static unsigned int skl_cursor_allocation(int num_active)
return 8;
}
-static void skl_ddb_entry_init_from_hw(struct skl_ddb_entry *entry, u32 reg)
+static void skl_ddb_entry_init_from_hw(struct drm_i915_private *dev_priv,
+ struct skl_ddb_entry *entry, u32 reg)
{
- entry->start = reg & 0x3ff;
- entry->end = (reg >> 16) & 0x3ff;
+ uint16_t mask;
+
+ if (INTEL_GEN(dev_priv) >= 11)
+ mask = ICL_DDB_ENTRY_MASK;
+ else
+ mask = SKL_DDB_ENTRY_MASK;
+ entry->start = reg & mask;
+ entry->end = (reg >> DDB_ENTRY_END_SHIFT) & mask;
+
if (entry->end)
entry->end += 1;
}
@@ -3898,7 +3906,9 @@ void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
else
val = I915_READ(CUR_BUF_CFG(pipe));
- skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane_id], val);
+ skl_ddb_entry_init_from_hw(dev_priv,
+ &ddb->plane[pipe][plane_id],
+ val);
}
intel_display_power_put(dev_priv, power_domain);
--
2.16.2
More information about the Intel-gfx
mailing list