[Intel-gfx] [PATCH v2] drm/i915: set minimum CD clock to twice the BCLK.

Jani Nikula jani.nikula at intel.com
Fri Apr 6 13:47:08 UTC 2018


On Thu, 05 Apr 2018, Abhay Kumar <abhay.kumar at intel.com> wrote:
> In glk when device boots with 1366x768 panel, HDA codec doesn't comeup.
> This result in no audio forever as cdclk is < 96Mhz.
> This chagne will ensure CD clock to be twice of  BCLK.

In short, we can't poke around CDCLK like this. It needs a full modeset,
and it's non-trivial from the path you're calling this from.

I'm considering pushing the original patch [1], because we haven't come
up with working alternatives. Please confirm that the patch reliably
fixes the issue.

(Though I think if you boot with *all* outputs disabled, we'll choose
the lowest CDCLK possible regardless of the patch, reproducing the same
issue.)

What's the CDCLK frequency set by the BIOS/GOP at boot? There are no
logs with drm.debug=14 attached to the referenced bug.

I see that bspec says, "158.4 MHz CD (Display Audio enumeration and
playback OK)" but that's *not* twice the BCLK. I'm inclined to lean
towards 192 MHz min leading to max CDCLK on GLK.

BR,
Jani.


[1] https://patchwork.freedesktop.org/patch/184778/



>
> v2:
>     - Address comment (Jani)
>     - New design approach
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102937
> Signed-off-by: Abhay Kumar <abhay.kumar at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_audio.c | 33 ++++++++++++++++++++++-----------
>  drivers/gpu/drm/i915/intel_cdclk.c | 21 +++++++++++++++++++++
>  drivers/gpu/drm/i915/intel_drv.h   |  1 +
>  3 files changed, 44 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
> index 709d6ca68074..f7dd3d532e93 100644
> --- a/drivers/gpu/drm/i915/intel_audio.c
> +++ b/drivers/gpu/drm/i915/intel_audio.c
> @@ -723,15 +723,37 @@ static void i915_audio_component_put_power(struct device *kdev)
>  	intel_display_power_put(kdev_to_i915(kdev), POWER_DOMAIN_AUDIO);
>  }
>  
> +/* Get CDCLK in kHz  */
> +static int i915_audio_component_get_cdclk_freq(struct device *kdev)
> +{
> +	struct drm_i915_private *dev_priv = kdev_to_i915(kdev);
> +
> +	if (WARN_ON_ONCE(!HAS_DDI(dev_priv)))
> +		return -ENODEV;
> +
> +	return dev_priv->cdclk.hw.cdclk;
> +}
> +
>  static void i915_audio_component_codec_wake_override(struct device *kdev,
>  						     bool enable)
>  {
>  	struct drm_i915_private *dev_priv = kdev_to_i915(kdev);
>  	u32 tmp;
> +	int current_cdclk;
>  
>  	if (!IS_GEN9_BC(dev_priv))
>  		return;
>  
> +	current_cdclk = i915_audio_component_get_cdclk_freq(kdev);
> +
> +	/*
> +	 * Before probing for HDA Codec we need to make sure
> +	 * "The CD clock frequency must be at least twice
> +	 * the frequency of the Azalia BCLK."
> +	 */
> +	if (INTEL_GEN(dev_priv) >= 9 && current_cdclk <= 192000)
> +		intel_cdclk_bump(dev_priv);
> +
>  	i915_audio_component_get_power(kdev);
>  
>  	/*
> @@ -753,17 +775,6 @@ static void i915_audio_component_codec_wake_override(struct device *kdev,
>  	i915_audio_component_put_power(kdev);
>  }
>  
> -/* Get CDCLK in kHz  */
> -static int i915_audio_component_get_cdclk_freq(struct device *kdev)
> -{
> -	struct drm_i915_private *dev_priv = kdev_to_i915(kdev);
> -
> -	if (WARN_ON_ONCE(!HAS_DDI(dev_priv)))
> -		return -ENODEV;
> -
> -	return dev_priv->cdclk.hw.cdclk;
> -}
> -
>  /*
>   * get the intel_encoder according to the parameter port and pipe
>   * intel_encoder is saved by the index of pipe
> diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
> index dc7db8a2caf8..9426e1b7badc 100644
> --- a/drivers/gpu/drm/i915/intel_cdclk.c
> +++ b/drivers/gpu/drm/i915/intel_cdclk.c
> @@ -1516,6 +1516,27 @@ void bxt_init_cdclk(struct drm_i915_private *dev_priv)
>  }
>  
>  /**
> + * intel_cdclk_bump - Increase cdclk to 2* BCLK
> + * @dev_priv: i915 device
> + *
> + * Increase CDCLK for GKL and CNL. This is done only
> + * during HDA codec probe.
> + */
> +void intel_cdclk_bump(struct drm_i915_private *dev_priv)
> +{
> +	struct intel_cdclk_state cdclk_state;
> +
> +	cdclk_state = dev_priv->cdclk.hw;
> +
> +	if (IS_GEMINILAKE(dev_priv)) {
> +		cdclk_state.cdclk = glk_calc_cdclk((2*96000));
> +		cdclk_state.vco = glk_de_pll_vco(dev_priv, cdclk_state.cdclk);
> +		cdclk_state.voltage_level = bxt_calc_voltage_level(cdclk_state.cdclk);
> +		bxt_set_cdclk(dev_priv, &cdclk_state);
> +	}
> +}
> +
> +/**
>   * bxt_uninit_cdclk - Uninitialize CDCLK on BXT
>   * @dev_priv: i915 device
>   *
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index d1452fd2a58d..5192753df3dc 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1417,6 +1417,7 @@ void skl_uninit_cdclk(struct drm_i915_private *dev_priv);
>  void cnl_init_cdclk(struct drm_i915_private *dev_priv);
>  void cnl_uninit_cdclk(struct drm_i915_private *dev_priv);
>  void bxt_init_cdclk(struct drm_i915_private *dev_priv);
> +void intel_cdclk_bump(struct drm_i915_private *dev_priv);
>  void bxt_uninit_cdclk(struct drm_i915_private *dev_priv);
>  void icl_init_cdclk(struct drm_i915_private *dev_priv);
>  void icl_uninit_cdclk(struct drm_i915_private *dev_priv);

-- 
Jani Nikula, Intel Open Source Technology Center


More information about the Intel-gfx mailing list