[Intel-gfx] [PATCH v4 6/6] drm/i915: Add skl_check_nv12_surface for NV12

[Vidya Srinivas]

From: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>

We skip src trunction/adjustments for
NV12 case and handle the sizes directly.
Without this, pipe fifo underruns are seen on APL/KBL.

v2: For NV12, making the src coordinates multiplier of 4

v3: Moving all the src coords handling code for NV12
to skl_check_nv12_surface

Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas at intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 39 ++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_sprite.c  | 15 ++++++++++----
 2 files changed, 50 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 925402e..b8dbaca 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3118,6 +3118,42 @@ static int skl_check_main_surface(const struct intel_crtc_state *crtc_state,
 	return 0;
 }
 
+static int
+skl_check_nv12_surface(const struct intel_crtc_state *crtc_state,
+		       struct intel_plane_state *plane_state)
+{
+	int crtc_x2 = plane_state->base.crtc_x + plane_state->base.crtc_w;
+	int crtc_y2 = plane_state->base.crtc_y + plane_state->base.crtc_h;
+
+	if (((plane_state->base.src_x >> 16) % 4) != 0 ||
+	    ((plane_state->base.src_y >> 16) % 4) != 0 ||
+	    ((plane_state->base.src_w >> 16) % 4) != 0 ||
+	    ((plane_state->base.src_h >> 16) % 4) != 0) {
+		DRM_DEBUG_KMS("src coords must be multiple of 4 for NV12\n");
+		return -EINVAL;
+	}
+
+	/* Clipping would cause a 1-3 pixel gap at the edge of the screen? */
+	if ((crtc_x2 > crtc_state->pipe_src_w && crtc_state->pipe_src_w % 4) ||
+	    (crtc_y2 > crtc_state->pipe_src_h && crtc_state->pipe_src_h % 4)) {
+		DRM_DEBUG_KMS("It's not possible to clip %u,%u to %u,%u\n",
+			      crtc_x2, crtc_y2,
+			      crtc_state->pipe_src_w, crtc_state->pipe_src_h);
+		return -EINVAL;
+	}
+
+	plane_state->base.src.x1 =
+		DIV_ROUND_CLOSEST(plane_state->base.src.x1, 1 << 18) << 18;
+	plane_state->base.src.x2 =
+		DIV_ROUND_CLOSEST(plane_state->base.src.x2, 1 << 18) << 18;
+	plane_state->base.src.y1 =
+		DIV_ROUND_CLOSEST(plane_state->base.src.y1, 1 << 18) << 18;
+	plane_state->base.src.y2 =
+		DIV_ROUND_CLOSEST(plane_state->base.src.y2, 1 << 18) << 18;
+
+	return 0;
+}
+
 static int skl_check_nv12_aux_surface(struct intel_plane_state *plane_state)
 {
 	const struct drm_framebuffer *fb = plane_state->base.fb;
@@ -3201,6 +3237,9 @@ int skl_check_plane_surface(const struct intel_crtc_state *crtc_state,
 	 * the main surface setup depends on it.
 	 */
 	if (fb->format->format == DRM_FORMAT_NV12) {
+		ret = skl_check_nv12_surface(crtc_state, plane_state);
+		if (ret)
+			return ret;
 		ret = skl_check_nv12_aux_surface(plane_state);
 		if (ret)
 			return ret;
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 8b7947d..f9985fb 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -1035,10 +1035,17 @@ intel_check_sprite_plane(struct intel_plane *plane,
 			return vscale;
 		}
 
-		/* Make the source viewport size an exact multiple of the scaling factors. */
-		drm_rect_adjust_size(src,
-				     drm_rect_width(dst) * hscale - drm_rect_width(src),
-				     drm_rect_height(dst) * vscale - drm_rect_height(src));
+		if (fb->format->format != DRM_FORMAT_NV12) {
+			/*
+			 * Make the source viewport size
+			 * an exact multiple of the scaling factors
+			 */
+			drm_rect_adjust_size(src,
+					     (drm_rect_width(dst) * hscale -
+					      drm_rect_width(src)),
+					     (drm_rect_height(dst) * vscale -
+					      drm_rect_height(src)));
+		}
 
 		drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
 				    state->base.rotation);
-- 
2.7.4