[Intel-gfx] [PATCH 3/3] drm/i915/icl: update ddb entry start/end mask during hw ddb readout

[Rodrigo Vivi]

On Thu, Apr 05, 2018 at 02:47:56PM +0530, Mahesh Kumar wrote:
> Gen11/ICL onward ddb entry start/end mask is increased from 10 bits to
> 11 bits. This patch make changes to use proper mask for ICL+ during
> hardware ddb value readout.
> 
> Changes since V1:
>  - Use _MASK & _SHIFT macro (James)
> Changes since V2:
>  - use kernel type u8 instead of uint8_t

Paulo warned me that I reviewed the wrong one.

rv-b stays with this change.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>



> 
> Signed-off-by: Mahesh Kumar <mahesh1.kumar at intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h |  3 +++
>  drivers/gpu/drm/i915/intel_pm.c | 18 ++++++++++++++----
>  2 files changed, 17 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 176dca6554f4..e3a6c535617d 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6459,6 +6459,9 @@ enum {
>  
>  #define _PLANE_BUF_CFG_1_B			0x7127c
>  #define _PLANE_BUF_CFG_2_B			0x7137c
> +#define  SKL_DDB_ENTRY_MASK			0x3FF
> +#define  ICL_DDB_ENTRY_MASK			0x7FF
> +#define  DDB_ENTRY_END_SHIFT			16
>  #define _PLANE_BUF_CFG_1(pipe)	\
>  	_PIPE(pipe, _PLANE_BUF_CFG_1_A, _PLANE_BUF_CFG_1_B)
>  #define _PLANE_BUF_CFG_2(pipe)	\
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 615a084736f3..f7522b268494 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3864,10 +3864,18 @@ static unsigned int skl_cursor_allocation(int num_active)
>  	return 8;
>  }
>  
> -static void skl_ddb_entry_init_from_hw(struct skl_ddb_entry *entry, u32 reg)
> +static void skl_ddb_entry_init_from_hw(struct drm_i915_private *dev_priv,
> +				       struct skl_ddb_entry *entry, u32 reg)
>  {
> -	entry->start = reg & 0x3ff;
> -	entry->end = (reg >> 16) & 0x3ff;
> +	u16 mask;
> +
> +	if (INTEL_GEN(dev_priv) >= 11)
> +		mask = ICL_DDB_ENTRY_MASK;
> +	else
> +		mask = SKL_DDB_ENTRY_MASK;
> +	entry->start = reg & mask;
> +	entry->end = (reg >> DDB_ENTRY_END_SHIFT) & mask;
> +
>  	if (entry->end)
>  		entry->end += 1;
>  }
> @@ -3898,7 +3906,9 @@ void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
>  			else
>  				val = I915_READ(CUR_BUF_CFG(pipe));
>  
> -			skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane_id], val);
> +			skl_ddb_entry_init_from_hw(dev_priv,
> +						   &ddb->plane[pipe][plane_id],
> +						   val);
>  		}
>  
>  		intel_display_power_put(dev_priv, power_domain);
> -- 
> 2.16.2
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx