[Intel-gfx] [PATCH 2/3] drm/i915/icl: Enable 2nd DBuf slice only when needed

Rodrigo Vivi rodrigo.vivi at intel.com
Wed Apr 25 23:46:16 UTC 2018


On Thu, Apr 05, 2018 at 02:47:55PM +0530, Mahesh Kumar wrote:
> ICL has two slices of DBuf, each slice of size 1024 blocks.
> We should not always enable slice-2. It should be enabled only if
> display total required BW is > 12GBps OR more than 1 pipes are enabled.
>
> Changes since V1:
>  - typecast total_data_rate to u64 before multiplication to solve any
>    possible overflow (Rodrigo)
>  - fix where skl_wm_get_hw_state was memsetting ddb, resulting
>    enabled_slices to become zero
>  - Fix the logic of calculating ddb_size
> Changes since V2:
>  - If no-crtc is part of commit required_slices will have value "0",
>    don't try to disable DBuf slice.
> Changes since V3:
>  - Create a generic helper to enable/disable slice
>  - don't return early if total_data_rate is 0, it may be cursor only
>    commit, or atomic modeset without any plane.
> Changes since V3:
>  - Solve checkpatch warnings
>  - use kernel types u8/u64 instead of uint8_t/uint64_t

Paulo warned me that I reviewed the wrong one.

rv-b stays with this change.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>

>
> Signed-off-by: Mahesh Kumar <mahesh1.kumar at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_display.c    | 10 +++++
>  drivers/gpu/drm/i915/intel_drv.h        |  6 +++
>  drivers/gpu/drm/i915/intel_pm.c         | 57 +++++++++++++++++++++++------
>  drivers/gpu/drm/i915/intel_runtime_pm.c | 65 ++++++++++++++++++++++++++-------
>  4 files changed, 113 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 96a1e6a7f69e..dfd7288b9484 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -12196,6 +12196,8 @@ static void skl_update_crtcs(struct drm_atomic_state *state)
>  	bool progress;
>  	enum pipe pipe;
>  	int i;
> +	u8 hw_enabled_slices = dev_priv->wm.skl_hw.ddb.enabled_slices;
> +	u8 required_slices = intel_state->wm_results.ddb.enabled_slices;
>
>  	const struct skl_ddb_entry *entries[I915_MAX_PIPES] = {};
>
> @@ -12204,6 +12206,10 @@ static void skl_update_crtcs(struct drm_atomic_state *state)
>  		if (new_crtc_state->active)
>  			entries[i] = &to_intel_crtc_state(old_crtc_state)->wm.skl.ddb;
>
> +	/* If 2nd DBuf slice required, enable it here */
> +	if (INTEL_GEN(dev_priv) >= 11 && required_slices > hw_enabled_slices)
> +		icl_dbuf_slices_update(dev_priv, required_slices);
> +
>  	/*
>  	 * Whenever the number of active pipes changes, we need to make sure we
>  	 * update the pipes in the right order so that their ddb allocations
> @@ -12254,6 +12260,10 @@ static void skl_update_crtcs(struct drm_atomic_state *state)
>  			progress = true;
>  		}
>  	} while (progress);
> +
> +	/* If 2nd DBuf slice is no more required disable it */
> +	if (INTEL_GEN(dev_priv) >= 11 && required_slices < hw_enabled_slices)
> +		icl_dbuf_slices_update(dev_priv, required_slices);
>  }
>
>  static void intel_atomic_helper_free_state(struct drm_i915_private *dev_priv)
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index d1452fd2a58d..13b9d9ce2c51 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -140,6 +140,10 @@
>  #define KHz(x) (1000 * (x))
>  #define MHz(x) KHz(1000 * (x))
>
> +#define KBps(x) (1000 * (x))
> +#define MBps(x) KBps(1000 * (x))
> +#define GBps(x) ((u64)1000 * MBps((x)))
> +
>  /*
>   * Display related stuff
>   */
> @@ -1914,6 +1918,8 @@ bool intel_display_power_get_if_enabled(struct drm_i915_private *dev_priv,
>  					enum intel_display_power_domain domain);
>  void intel_display_power_put(struct drm_i915_private *dev_priv,
>  			     enum intel_display_power_domain domain);
> +void icl_dbuf_slices_update(struct drm_i915_private *dev_priv,
> +			    u8 req_slices);
>
>  static inline void
>  assert_rpm_device_not_suspended(struct drm_i915_private *dev_priv)
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 7341f4af3151..615a084736f3 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3771,9 +3771,42 @@ bool intel_can_enable_sagv(struct drm_atomic_state *state)
>  	return true;
>  }
>
> +static unsigned int intel_get_ddb_size(struct drm_i915_private *dev_priv,
> +				       const struct intel_crtc_state *cstate,
> +				       const unsigned int total_data_rate,
> +				       const int num_active,
> +				       struct skl_ddb_allocation *ddb)
> +{
> +	const struct drm_display_mode *adjusted_mode;
> +	u64 total_data_bw;
> +	u16 ddb_size = INTEL_INFO(dev_priv)->ddb_size;
> +
> +	WARN_ON(ddb_size == 0);
> +
> +	if (INTEL_GEN(dev_priv) < 11)
> +		return ddb_size - 4; /* 4 blocks for bypass path allocation */
> +
> +	adjusted_mode = &cstate->base.adjusted_mode;
> +	total_data_bw = (u64)total_data_rate * drm_mode_vrefresh(adjusted_mode);
> +
> +	/*
> +	 * 12GB/s is maximum BW supported by single DBuf slice.
> +	 */
> +	if (total_data_bw >= GBps(12) || num_active > 1) {
> +		ddb->enabled_slices = 2;
> +	} else {
> +		ddb->enabled_slices = 1;
> +		ddb_size /= 2;
> +	}
> +
> +	return ddb_size;
> +}
> +
>  static void
>  skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
>  				   const struct intel_crtc_state *cstate,
> +				   const unsigned int total_data_rate,
> +				   struct skl_ddb_allocation *ddb,
>  				   struct skl_ddb_entry *alloc, /* out */
>  				   int *num_active /* out */)
>  {
> @@ -3796,11 +3829,8 @@ skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
>  	else
>  		*num_active = hweight32(dev_priv->active_crtcs);
>
> -	ddb_size = INTEL_INFO(dev_priv)->ddb_size;
> -	WARN_ON(ddb_size == 0);
> -
> -	if (INTEL_GEN(dev_priv) < 11)
> -		ddb_size -= 4; /* 4 blocks for bypass path allocation */
> +	ddb_size = intel_get_ddb_size(dev_priv, cstate, total_data_rate,
> +				      *num_active, ddb);
>
>  	/*
>  	 * If the state doesn't change the active CRTC's, then there's
> @@ -4239,7 +4269,11 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
>  		return 0;
>  	}
>
> -	skl_ddb_get_pipe_allocation_limits(dev, cstate, alloc, &num_active);
> +	total_data_rate = skl_get_total_relative_data_rate(cstate,
> +							   plane_data_rate,
> +							   plane_y_data_rate);
> +	skl_ddb_get_pipe_allocation_limits(dev, cstate, total_data_rate, ddb,
> +					   alloc, &num_active);
>  	alloc_size = skl_ddb_entry_size(alloc);
>  	if (alloc_size == 0)
>  		return 0;
> @@ -4274,9 +4308,6 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
>  	 *
>  	 * FIXME: we may not allocate every single block here.
>  	 */
> -	total_data_rate = skl_get_total_relative_data_rate(cstate,
> -							   plane_data_rate,
> -							   plane_y_data_rate);
>  	if (total_data_rate == 0)
>  		return 0;
>
> @@ -5382,8 +5413,12 @@ void skl_wm_get_hw_state(struct drm_device *dev)
>  		/* Fully recompute DDB on first atomic commit */
>  		dev_priv->wm.distrust_bios_wm = true;
>  	} else {
> -		/* Easy/common case; just sanitize DDB now if everything off */
> -		memset(ddb, 0, sizeof(*ddb));
> +		/*
> +		 * Easy/common case; just sanitize DDB now if everything off
> +		 * Keep dbuf slice info intact
> +		 */
> +		memset(ddb->plane, 0, sizeof(ddb->plane));
> +		memset(ddb->y_plane, 0, sizeof(ddb->y_plane));
>  	}
>  }
>
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 58be542d660b..06c111ca177e 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -2627,32 +2627,69 @@ static void intel_power_domains_sync_hw(struct drm_i915_private *dev_priv)
>  	mutex_unlock(&power_domains->lock);
>  }
>
> -static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
> +static inline
> +bool intel_dbuf_slice_set(struct drm_i915_private *dev_priv,
> +			  i915_reg_t reg, bool enable)
>  {
> -	I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
> -	POSTING_READ(DBUF_CTL);
> +	u32 val, status;
>
> +	val = I915_READ(reg);
> +	val = enable ? (val | DBUF_POWER_REQUEST) : (val & ~DBUF_POWER_REQUEST);
> +	I915_WRITE(reg, val);
> +	POSTING_READ(reg);
>  	udelay(10);
>
> -	if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
> -		DRM_ERROR("DBuf power enable timeout\n");
> +	status = I915_READ(reg) & DBUF_POWER_STATE;
> +	if ((enable && !status) || (!enable && status)) {
> +		DRM_ERROR("DBus power %s timeout!\n",
> +			  enable ? "enable" : "disable");
> +		return false;
> +	}
> +	return true;
> +}
> +
> +static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
> +{
> +	intel_dbuf_slice_set(dev_priv, DBUF_CTL, true);
>  }
>
>  static void gen9_dbuf_disable(struct drm_i915_private *dev_priv)
>  {
> -	I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
> -	POSTING_READ(DBUF_CTL);
> +	intel_dbuf_slice_set(dev_priv, DBUF_CTL, false);
> +}
>
> -	udelay(10);
> +static u8 intel_dbuf_max_slices(struct drm_i915_private *dev_priv)
> +{
> +	if (INTEL_GEN(dev_priv) < 11)
> +		return 1;
> +	return 2;
> +}
>
> -	if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
> -		DRM_ERROR("DBuf power disable timeout!\n");
> +void icl_dbuf_slices_update(struct drm_i915_private *dev_priv,
> +			    u8 req_slices)
> +{
> +	u8 hw_enabled_slices = dev_priv->wm.skl_hw.ddb.enabled_slices;
> +	u32 val;
> +	bool ret;
> +
> +	if (req_slices > intel_dbuf_max_slices(dev_priv)) {
> +		DRM_ERROR("Invalid number of dbuf slices requested\n");
> +		return;
> +	}
> +
> +	if (req_slices == hw_enabled_slices || req_slices == 0)
> +		return;
> +
> +	val = I915_READ(DBUF_CTL_S2);
> +	if (req_slices > hw_enabled_slices)
> +		ret = intel_dbuf_slice_set(dev_priv, DBUF_CTL_S2, true);
> +	else
> +		ret = intel_dbuf_slice_set(dev_priv, DBUF_CTL_S2, false);
> +
> +	if (ret)
> +		dev_priv->wm.skl_hw.ddb.enabled_slices = req_slices;
>  }
>
> -/*
> - * TODO: we shouldn't always enable DBUF_CTL_S2, we should only enable it when
> - * needed and keep it disabled as much as possible.
> - */
>  static void icl_dbuf_enable(struct drm_i915_private *dev_priv)
>  {
>  	I915_WRITE(DBUF_CTL_S1, I915_READ(DBUF_CTL_S1) | DBUF_POWER_REQUEST);
> --
> 2.16.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx


More information about the Intel-gfx mailing list