[Intel-gfx] [PATCH 3/3] drm/i915/icl: update ddb entry start/end mask during hw ddb readout

[Mahesh Kumar]

Gen11/ICL onward ddb entry start/end mask is increased from 10 bits to
11 bits. This patch make changes to use proper mask for ICL+ during
hardware ddb value readout.

Changes since V1:
 - Use _MASK & _SHIFT macro (James)
Changes since V2:
 - use kernel type u8 instead of uint8_t
Changes since V3:
 - Rebase

Signed-off-by: Mahesh Kumar <mahesh1.kumar at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h |  3 +++
 drivers/gpu/drm/i915/intel_pm.c | 26 +++++++++++++++++++-------
 2 files changed, 22 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2dad655a710c..b94fa933530e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6481,6 +6481,9 @@ enum {
 
 #define _PLANE_BUF_CFG_1_B			0x7127c
 #define _PLANE_BUF_CFG_2_B			0x7137c
+#define  SKL_DDB_ENTRY_MASK			0x3FF
+#define  ICL_DDB_ENTRY_MASK			0x7FF
+#define  DDB_ENTRY_END_SHIFT			16
 #define _PLANE_BUF_CFG_1(pipe)	\
 	_PIPE(pipe, _PLANE_BUF_CFG_1_A, _PLANE_BUF_CFG_1_B)
 #define _PLANE_BUF_CFG_2(pipe)	\
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 3e72e9eb736e..4126132eb707 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3864,10 +3864,18 @@ static unsigned int skl_cursor_allocation(int num_active)
 	return 8;
 }
 
-static void skl_ddb_entry_init_from_hw(struct skl_ddb_entry *entry, u32 reg)
+static void skl_ddb_entry_init_from_hw(struct drm_i915_private *dev_priv,
+				       struct skl_ddb_entry *entry, u32 reg)
 {
-	entry->start = reg & 0x3ff;
-	entry->end = (reg >> 16) & 0x3ff;
+	u16 mask;
+
+	if (INTEL_GEN(dev_priv) >= 11)
+		mask = ICL_DDB_ENTRY_MASK;
+	else
+		mask = SKL_DDB_ENTRY_MASK;
+	entry->start = reg & mask;
+	entry->end = (reg >> DDB_ENTRY_END_SHIFT) & mask;
+
 	if (entry->end)
 		entry->end += 1;
 }
@@ -3884,7 +3892,8 @@ skl_ddb_get_hw_plane_state(struct drm_i915_private *dev_priv,
 	/* Cursor doesn't support NV12/planar, so no extra calculation needed */
 	if (plane_id == PLANE_CURSOR) {
 		val = I915_READ(CUR_BUF_CFG(pipe));
-		skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane_id], val);
+		skl_ddb_entry_init_from_hw(dev_priv,
+					   &ddb->plane[pipe][plane_id], val);
 		return;
 	}
 
@@ -3903,10 +3912,13 @@ skl_ddb_get_hw_plane_state(struct drm_i915_private *dev_priv,
 	val2 = I915_READ(PLANE_NV12_BUF_CFG(pipe, plane_id));
 
 	if (fourcc == DRM_FORMAT_NV12) {
-		skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane_id], val2);
-		skl_ddb_entry_init_from_hw(&ddb->uv_plane[pipe][plane_id], val);
+		skl_ddb_entry_init_from_hw(dev_priv,
+					   &ddb->plane[pipe][plane_id], val2);
+		skl_ddb_entry_init_from_hw(dev_priv,
+					   &ddb->uv_plane[pipe][plane_id], val);
 	} else {
-		skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane_id], val);
+		skl_ddb_entry_init_from_hw(dev_priv,
+					   &ddb->plane[pipe][plane_id], val);
 	}
 }
 
-- 
2.16.2