[Intel-gfx] [PATCH] drm/i915: configure the transcoder clocks before touching pipeconf on HSW+

[Ville Syrjälä]

On Fri, Apr 27, 2018 at 04:12:08PM -0700, Paulo Zanoni wrote:
> For all platforms that run haswell_crtc_enable, our spec tells us to
> configure the transcoder clocks before it tells us to set pipeconf and
> the other pipe/transcoder/plane registers.
> 
> For some reason we've been able to get away with doing what we were
> doing until now, but starting from Icelake, we get machine hangs if we
> try to touch the pipe/transcoder registers without having the clocks
> configured.
> 
> So this patch changes all the relevant platforms to call
> intel_ddi_enable_pipe_clock at the point we're supposed to, according
> to the spec.

I don't think this really matches the spec. You're now enabling the
clock before configuring the port stuff and link training. So AFAICS
intel_ddi_enable_pipe_clock() seems to be in the correct place, but
we're just configuring all the pipe/transcoder/etc. stuff way too
early.

> 
> It seems there is a way to work around this problem on ICL with some
> chicken bit, but I still couldn't find which one it is, and it's
> better if we just do the right thing here.
> 
> Cc: Arthur J Runyan <arthur.j.runyan at intel.com>
> Cc: James Ausmus <james.ausmus at intel.com>
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_display.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> Luckily our CI system should be in a spot where it is able to tell us
> whether this patch is good with high confidence. I haven't tested it
> on every affected platform.
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 48576ea2d36c..c93aed2ec16d 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -5578,8 +5578,11 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,
>  				     &intel_crtc->config->fdi_m_n, NULL);
>  	}
>  
> -	if (!transcoder_is_dsi(cpu_transcoder))
> +	if (!transcoder_is_dsi(cpu_transcoder)) {
> +		intel_ddi_enable_pipe_clock(pipe_config);
> +
>  		haswell_set_pipeconf(crtc);
> +	}
>  
>  	haswell_set_pipemisc(crtc);
>  
> @@ -5589,9 +5592,6 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,
>  
>  	intel_encoders_pre_enable(crtc, pipe_config, old_state);
>  
> -	if (!transcoder_is_dsi(cpu_transcoder))
> -		intel_ddi_enable_pipe_clock(pipe_config);
> -
>  	/* Display WA #1180: WaDisableScalarClockGating: glk, cnl */
>  	psl_clkgate_wa = (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) &&
>  			 intel_crtc->config->pch_pfit.enabled;
> -- 
> 2.14.3
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel