[Intel-gfx] [PATCH v6 02/35] drm: HDMI and DP specific HDCP2.2 defines

Wed Aug 1 11:34:23 UTC 2018

On Tuesday 31 July 2018 01:55 PM, Shankar, Uma wrote:
>
>> -----Original Message-----
>> From: C, Ramalingam
>> Sent: Saturday, July 14, 2018 8:45 AM
>> To: intel-gfx at lists.freedesktop.org; dri-devel at lists.freedesktop.org;
>> daniel at ffwll.ch; seanpaul at chromium.org; Winkler, Tomas
>> <tomas.winkler at intel.com>; Usyskin, Alexander <alexander.usyskin at intel.com>;
>> Shankar, Uma <uma.shankar at intel.com>
>> Cc: Sharma, Shashank <shashank.sharma at intel.com>; C, Ramalingam
>> <ramalingam.c at intel.com>
>> Subject: [PATCH v6 02/35] drm: HDMI and DP specific HDCP2.2 defines
>>
>> This patch adds HDCP register definitions for HDMI and DP HDCP adaptations.
>>
>> HDMI specific HDCP2.2 register definitions are added into drm_hdcp.h, where as
>> HDCP2.2 register offsets in DPCD offsets are defined at drm_dp_helper.h.
>>
>> v2:
>>   bit_field definitions are replaced by macros. [Tomas and Jani]
>> v3:
>>   No Changes.
>> v4:
>>   Comments style and typos are fixed [Uma]
>> v5:
>>   Fix for macros.
>> v6:
>>   Adds _MS to the timeouts to represent units [Sean Paul]
>>
>> Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
>> Reviewed-by: Sean Paul <seanpaul at chromium.org>
>> ---
>> include/drm/drm_dp_helper.h | 51
>> +++++++++++++++++++++++++++++++++++++++++++++
>> include/drm/drm_hdcp.h      | 30 ++++++++++++++++++++++++++
>> 2 files changed, 81 insertions(+)
>>
>> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index
>> c01564991a9f..17e0889d6aaa 100644
>> --- a/include/drm/drm_dp_helper.h
>> +++ b/include/drm/drm_dp_helper.h
>> @@ -904,6 +904,57 @@
>> #define DP_AUX_HDCP_KSV_FIFO		0x6802C
>> #define DP_AUX_HDCP_AINFO		0x6803B
>>
>> +/* DP HDCP2.2 parameter offsets in DPCD address space */
>> +#define DP_HDCP_2_2_REG_RTX_OFFSET		0x69000
>> +#define DP_HDCP_2_2_REG_TXCAPS_OFFSET		0x69008
>> +#define DP_HDCP_2_2_REG_CERT_RX_OFFSET		0x6900B
>> +#define DP_HDCP_2_2_REG_RRX_OFFSET		0x69215
>> +#define DP_HDCP_2_2_REG_RX_CAPS_OFFSET		0x6921D
>> +#define DP_HDCP_2_2_REG_EKPUB_KM_OFFSET		0x69220
>> +#define DP_HDCP_2_2_REG_EKH_KM_OFFSET		0x692A0
> It would be good to append WRITE since we have a READ counterpart to be explicit.
Sure.
>> +#define DP_HDCP_2_2_REG_M_OFFSET		0x692B0
>> +#define DP_HDCP_2_2_REG_HPRIME_OFFSET		0x692C0
>> +#define DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET	0x692E0
>> +#define DP_HDCP_2_2_REG_RN_OFFSET		0x692F0
>> +#define DP_HDCP_2_2_REG_LPRIME_OFFSET		0x692F8
>> +#define DP_HDCP_2_2_REG_EDKEY_KS_OFFSET		0x69318
>> +#define	DP_HDCP_2_2_REG_RIV_OFFSET		0x69328
>> +#define DP_HDCP_2_2_REG_RXINFO_OFFSET		0x69330
>> +#define DP_HDCP_2_2_REG_SEQ_NUM_V_OFFSET	0x69332
>> +#define DP_HDCP_2_2_REG_VPRIME_OFFSET		0x69335
>> +#define DP_HDCP_2_2_REG_RECV_ID_LIST_OFFSET	0x69345
>> +#define DP_HDCP_2_2_REG_V_OFFSET		0x693E0
>> +#define DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET	0x693F0
>> +#define DP_HDCP_2_2_REG_K_OFFSET		0x693F3
>> +#define DP_HDCP_2_2_REG_STREAM_ID_TYPE_OFFSET	0x693F5
>> +#define DP_HDCP_2_2_REG_MPRIME_OFFSET		0x69473
>> +#define DP_HDCP_2_2_REG_RXSTATUS_OFFSET		0x69493
>> +#define DP_HDCP_2_2_REG_STREAM_TYPE_OFFSET	0x69494
>> +#define DP_HDCP_2_2_REG_DBG_OFFSET		0x69518
>> +
>> +/* DP HDCP message start offsets in DPCD address space */
>> +#define DP_HDCP_2_2_AKE_INIT_OFFSET
>> 	DP_HDCP_2_2_REG_RTX_OFFSET
>> +#define DP_HDCP_2_2_AKE_SEND_CERT_OFFSET
>> 	DP_HDCP_2_2_REG_CERT_RX_OFFSET
>> +#define DP_HDCP_2_2_AKE_NO_STORED_KM_OFFSET
>> 	DP_HDCP_2_2_REG_EKPUB_KM_OFFSET
>> +#define DP_HDCP_2_2_AKE_STORED_KM_OFFSET
>> 	DP_HDCP_2_2_REG_EKH_KM_OFFSET
>> +#define DP_HDCP_2_2_AKE_SEND_HPRIME_OFFSET
>> 	DP_HDCP_2_2_REG_HPRIME_OFFSET
>> +#define DP_HDCP_2_2_AKE_SEND_PAIRING_INFO_OFFSET \
>> +
>> 	DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET
>> +#define DP_HDCP_2_2_LC_INIT_OFFSET
>> 	DP_HDCP_2_2_REG_RN_OFFSET
>> +#define DP_HDCP_2_2_LC_SEND_LPRIME_OFFSET
>> 	DP_HDCP_2_2_REG_LPRIME_OFFSET
>> +#define DP_HDCP_2_2_SKE_SEND_EKS_OFFSET
>> 	DP_HDCP_2_2_REG_EDKEY_KS_OFFSET
>> +#define DP_HDCP_2_2_REP_SEND_RECVID_LIST_OFFSET
>> 	DP_HDCP_2_2_REG_RXINFO_OFFSET
>> +#define DP_HDCP_2_2_REP_SEND_ACK_OFFSET
>> 	DP_HDCP_2_2_REG_V_OFFSET
>> +#define DP_HDCP_2_2_REP_STREAM_MANAGE_OFFSET
>> 	DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET
>> +#define DP_HDCP_2_2_REP_STREAM_READY_OFFSET
>> 	DP_HDCP_2_2_REG_MPRIME_OFFSET
>> +
>> +#define HDCP_2_2_DP_RXSTATUS_LEN		1
>> +#define HDCP_2_2_DP_RXSTATUS_READY(x)		((x) & BIT(0))
>> +#define HDCP_2_2_DP_RXSTATUS_H_PRIME(x)		((x) & BIT(1))
>> +#define HDCP_2_2_DP_RXSTATUS_PAIRING(x)		((x) & BIT(2))
>> +#define HDCP_2_2_DP_RXSTATUS_REAUTH_REQ(x)	((x) & BIT(3))
>> +#define HDCP_2_2_DP_RXSTATUS_LINK_FAILED(x)	((x) & BIT(4))
>> +
>> /* DP 1.2 Sideband message defines */
>> /* peer device type - DP 1.2a Table 2-92 */
>> #define DP_PEER_DEVICE_NONE		0x0
>> diff --git a/include/drm/drm_hdcp.h b/include/drm/drm_hdcp.h index
>> a2a4a159fcde..2b4cfb0b7324 100644
>> --- a/include/drm/drm_hdcp.h
>> +++ b/include/drm/drm_hdcp.h
>> @@ -222,4 +222,34 @@ struct hdcp2_dp_errata_stream_type {
>> 	uint8_t			stream_type;
>> } __packed;
>>
>> +/* HDCP2.2 TIMEOUTs in mSec */
>> +#define HDCP_2_2_CERT_TIMEOUT_MS		100
>> +#define HDCP_2_2_HPRIME_NO_PAIRED_TIMEOUT_MS	1000
>> +#define HDCP_2_2_HPRIME_PAIRED_TIMEOUT_MS	200
>> +#define HDCP_2_2_PAIRING_TIMEOUT_MS		200
>> +#define	HDCP_2_2_HDMI_LPRIME_TIMEOUT_MS		20
>> +#define HDCP_2_2_DP_LPRIME_TIMEOUT_MS		7
>> +#define HDCP_2_2_RECVID_LIST_TIMEOUT_MS		3000
> Is this a ballpark figure ?  I couldn't get a specific timeout value from spec.
This is as per Spec. Mentioned as "three seconds".
>> +#define HDCP_2_2_STREAM_READY_TIMEOUT_MS	100
>> +
>> +/* HDMI HDCP2.2 Register Offsets */
>> +#define HDCP_2_2_HDMI_REG_VER_OFFSET		0x50
>> +#define HDCP_2_2_HDMI_REG_WR_MSG_OFFSET		0x60
>> +#define HDCP_2_2_HDMI_REG_RXSTATUS_OFFSET	0x70
>> +#define HDCP_2_2_HDMI_REG_RD_MSG_OFFSET		0x80
>> +#define HDCP_2_2_HDMI_REG_DBG_OFFSET		0xC0
>> +
>> +#define HDCP_2_2_HDMI_SUPPORT_MASK		BIT(2)
>> +#define HDCP_2_2_RXCAPS_VERSION_VAL		0x2
>> +
>> +#define HDCP_2_2_RX_CAPS_VERSION_VAL		0x02
> The above 2 names are confusing. Both say RXCAPS_VERSION. Please
> rename them for clarity or drop one of them since they reflect same value, in case
> intention was to define some other field here.
Defined for different purpose. (DP capability reg check and send_cert 
value check).
Co-incidentally both values are same. Hence I will drop one.

Thanks.
--Ram
>> +#define HDCP_2_2_SEQ_NUM_MAX			0xFFFFFF
>> +#define	HDCP_2_2_DELAY_BEFORE_ENCRYPTION_EN	200
>> +
>> +/* Below macros take a byte at a time and mask the bit(s) */
>> +#define HDCP_2_2_HDMI_RXSTATUS_LEN		2
>> +#define HDCP_2_2_HDMI_RXSTATUS_MSG_SZ_HI(x)	((x) & 0x3)
>> +#define HDCP_2_2_HDMI_RXSTATUS_READY(x)		((x) & BIT(2))
>> +#define HDCP_2_2_HDMI_RXSTATUS_REAUTH_REQ(x)	((x) & BIT(3))
>> +
>> #endif
>> --
>> 2.7.4