[Intel-gfx] [PATCH 2/2] drm/i915/icl: Get DDI clock for ICL for MG PLL and TBT PLL
Souza, Jose
jose.souza at intel.com
Mon Aug 13 22:19:09 UTC 2018
On Fri, 2018-07-27 at 13:04 -0700, Paulo Zanoni wrote:
> From: Manasi Navare <manasi.d.navare at intel.com>
>
> PLLs are the source clocks for the DDIs so in order to determine the
> ddi clock we need to check the PLL configuration.
>
> For MG PHy Ports (C - F), depending on whether it is a TBT PLL or MG
> PLL the link lock can be obtained from the the PLL divisors based on
> the specification.
>
> v2 (from Paulo):
> * Make the algorithm look more like what's in the spec, also
> document
> where we differ form the spec and why.
> * Make the code a little more consistent with our coding style.
>
> Cc: James Ausmus <james.ausmus at intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 5 ++
> drivers/gpu/drm/i915/intel_ddi.c | 81
> +++++++++++++++++++++++++++++++-
> 2 files changed, 84 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h
> b/drivers/gpu/drm/i915/i915_reg.h
> index e04ac47d53db..cd37e76d4d19 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -9458,6 +9458,7 @@ enum skl_power_gate {
> #define MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_5 (2 << 12)
> #define MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_7 (3 << 12)
> #define MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO(x) ((x) << 8)
> +#define MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_SHIFT 8
> #define MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK (0xf <<
> 8)
> #define MG_CLKTOP2_HSCLKCTL(port) _MMIO_PORT((port) - PORT_C, \
> _MG_CLKTOP2_HSCLKCTL_PORT1
> , \
> @@ -9468,7 +9469,10 @@ enum skl_power_gate {
> #define _MG_PLL_DIV0_PORT3 0x16AA00
> #define _MG_PLL_DIV0_PORT4 0x16BA00
> #define MG_PLL_DIV0_FRACNEN_H (1 <<
> 30)
> +#define MG_PLL_DIV0_FBDIV_FRAC_MASK (0x3fff
> ff << 8)
> +#define MG_PLL_DIV0_FBDIV_FRAC_SHIFT 8
> #define MG_PLL_DIV0_FBDIV_FRAC(x) ((x) << 8)
> +#define MG_PLL_DIV0_FBDIV_INT_MASK (0xff << 0)
> #define MG_PLL_DIV0_FBDIV_INT(x) ((x) << 0)
> #define MG_PLL_DIV0(port) _MMIO_PORT((port) - PORT_C,
> _MG_PLL_DIV0_PORT1, \
> _MG_PLL_DIV0_PORT2)
> @@ -9483,6 +9487,7 @@ enum skl_power_gate {
> #define MG_PLL_DIV1_DITHER_DIV_4 (2 << 12)
> #define MG_PLL_DIV1_DITHER_DIV_8 (3 << 12)
> #define MG_PLL_DIV1_NDIVRATIO(x) ((x) << 4)
> +#define MG_PLL_DIV1_FBPREDIV_MASK (0xf << 0)
> #define MG_PLL_DIV1_FBPREDIV(x) ((x) << 0)
> #define MG_PLL_DIV1(port) _MMIO_PORT((port) - PORT_C,
> _MG_PLL_DIV1_PORT1, \
> _MG_PLL_DIV1_PORT2)
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> b/drivers/gpu/drm/i915/intel_ddi.c
> index 0adc043529f2..a18d57046bcc 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1427,6 +1427,81 @@ static int cnl_calc_wrpll_link(struct
> drm_i915_private *dev_priv,
> return dco_freq / (p0 * p1 * p2 * 5);
> }
>
> +static int icl_calc_tbt_pll_link(struct drm_i915_private *dev_priv,
> + enum port port)
> +{
> + u32 val = I915_READ(DDI_CLK_SEL(port)) & DDI_CLK_SEL_MASK;
> +
> + switch (val) {
> + case DDI_CLK_SEL_NONE:
> + return 0;
> + case DDI_CLK_SEL_TBT_162:
> + return 162000;
> + case DDI_CLK_SEL_TBT_270:
> + return 270000;
> + case DDI_CLK_SEL_TBT_540:
> + return 540000;
> + case DDI_CLK_SEL_TBT_810:
> + return 810000;
> + default:
> + MISSING_CASE(val);
> + return 0;
> + }
> +}
> +
> +static int icl_calc_mg_pll_link(struct drm_i915_private *dev_priv,
> + enum port port)
> +{
> + u32 mg_pll_div0, mg_clktop_hsclkctl;
> + u32 m1, m2_int, m2_frac, div1, div2, refclk;
> + u64 tmp;
> +
> + refclk = dev_priv->cdclk.hw.ref;
> +
> + mg_pll_div0 = I915_READ(MG_PLL_DIV0(port));
> + mg_clktop_hsclkctl = I915_READ(MG_CLKTOP2_HSCLKCTL(port));
> +
> + m1 = I915_READ(MG_PLL_DIV1(port)) & MG_PLL_DIV1_FBPREDIV_MASK;
> + m2_int = mg_pll_div0 & MG_PLL_DIV0_FBDIV_INT_MASK;
> + m2_frac = (mg_pll_div0 & MG_PLL_DIV0_FRACNEN_H) ?
> + (mg_pll_div0 & MG_PLL_DIV0_FBDIV_FRAC_MASK) >>
> + MG_PLL_DIV0_FBDIV_FRAC_SHIFT : 0;
> +
> + switch (mg_clktop_hsclkctl &
> MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK) {
> + case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_2:
> + div1 = 2;
> + break;
> + case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_3:
> + div1 = 3;
> + break;
> + case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_5:
> + div1 = 5;
> + break;
> + case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_7:
> + div1 = 7;
> + break;
> + default:
> + MISSING_CASE(mg_clktop_hsclkctl);
> + return 0;
> + }
> +
> + div2 = (mg_clktop_hsclkctl &
> MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK) >>
> + MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_SHIFT;
> + /* div2 value of 0 is same as 1 means no div */
> + if (div2 == 0)
> + div2 = 1;
> +
> + /*
> + * Adjust the original formula to delay the division by 2^22 in
> order to
> + * minimize possible rounding errors.
> + */
> + tmp = (u64)m1 * m2_int * refclk +
> + (((u64)m1 * m2_frac * refclk) >> 22);
In my calculations this is not the same as: M1 * M2 * refclk
As M2 is = m2_int + (m2_frac/2^22)
Other than that everything else looks good.
> + tmp = div_u64(tmp, 5 * div1 * div2);
> +
> + return tmp;
> +}
> +
> static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)
> {
> int dotclock;
> @@ -1467,8 +1542,10 @@ static void icl_ddi_clock_get(struct
> intel_encoder *encoder,
> link_clock =
> icl_calc_dp_combo_pll_link(dev_priv,
> pll_id)
> ;
> } else {
> - /* FIXME - Add for MG PLL */
> - WARN(1, "MG PLL clock_get code not implemented yet\n");
> + if (pll_id == DPLL_ID_ICL_TBTPLL)
> + link_clock = icl_calc_tbt_pll_link(dev_priv,
> port);
> + else
> + link_clock = icl_calc_mg_pll_link(dev_priv,
> port);
> }
>
> pipe_config->port_clock = link_clock;
More information about the Intel-gfx
mailing list