[Intel-gfx] [PATCH 2/5] drm/i915: Refactor PSR status debugfs
José Roberto de Souza
jose.souza at intel.com
Tue Dec 4 23:00:29 UTC 2018
The old debugfs fields was not following a naming partern and it was
a bit confusing.
So it went from:
~$ sudo more /sys/kernel/debug/dri/0/i915_edp_psr_status
Sink_Support: yes
PSR mode: PSR1
Enabled: yes
Busy frontbuffer bits: 0x000
Main link in standby mode: no
HW Enabled & Active bit: yes
Source PSR status: 0x24050006 [SRDONACK]
To:
~$ sudo more /sys/kernel/debug/dri/0/i915_edp_psr_status
Sink support: yes [0x00000003]
Status: PSR1 enabled
Source PSR ctl: enabled [0x81f00e26]
Source PSR status: SRDENT [0x40040006]
Busy frontbuffer bits: 0x00000000
The 'Main link in standby mode' was removed as it is not useful but
if needed by someone the information is still in the register value
of 'Source PSR ctl' inside of the brackets, PSR mode and Enabled was
squashed into Status, some renames and reorders and we have this
cleaner version. This will also make easy to parse debugfs for IGT
tests.
Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
Suggested-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 96 +++++++++++++++--------------
1 file changed, 49 insertions(+), 47 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 38dcee1ca062..86303ba02666 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2665,7 +2665,8 @@ DEFINE_SHOW_ATTRIBUTE(i915_psr_sink_status);
static void
psr_source_status(struct drm_i915_private *dev_priv, struct seq_file *m)
{
- u32 val, psr_status;
+ u32 val, status_val;
+ const char *status = "unknown";
if (dev_priv->psr.psr2_enabled) {
static const char * const live_status[] = {
@@ -2681,14 +2682,11 @@ psr_source_status(struct drm_i915_private *dev_priv, struct seq_file *m)
"BUF_ON",
"TG_ON"
};
- psr_status = I915_READ(EDP_PSR2_STATUS);
- val = (psr_status & EDP_PSR2_STATUS_STATE_MASK) >>
- EDP_PSR2_STATUS_STATE_SHIFT;
- if (val < ARRAY_SIZE(live_status)) {
- seq_printf(m, "Source PSR status: 0x%x [%s]\n",
- psr_status, live_status[val]);
- return;
- }
+ val = I915_READ(EDP_PSR2_STATUS);
+ status_val = (val & EDP_PSR2_STATUS_STATE_MASK) >>
+ EDP_PSR2_STATUS_STATE_SHIFT;
+ if (status_val < ARRAY_SIZE(live_status))
+ status = live_status[status_val];
} else {
static const char * const live_status[] = {
"IDLE",
@@ -2700,74 +2698,78 @@ psr_source_status(struct drm_i915_private *dev_priv, struct seq_file *m)
"SRDOFFACK",
"SRDENT_ON",
};
- psr_status = I915_READ(EDP_PSR_STATUS);
- val = (psr_status & EDP_PSR_STATUS_STATE_MASK) >>
- EDP_PSR_STATUS_STATE_SHIFT;
- if (val < ARRAY_SIZE(live_status)) {
- seq_printf(m, "Source PSR status: 0x%x [%s]\n",
- psr_status, live_status[val]);
- return;
- }
+ val = I915_READ(EDP_PSR_STATUS);
+ status_val = (val & EDP_PSR_STATUS_STATE_MASK) >>
+ EDP_PSR_STATUS_STATE_SHIFT;
+ if (status_val < ARRAY_SIZE(live_status))
+ status = live_status[status_val];
}
- seq_printf(m, "Source PSR status: 0x%x [%s]\n", psr_status, "unknown");
+ seq_printf(m, "Source PSR status: %s [0x%08x]\n", status, val);
}
static int i915_edp_psr_status(struct seq_file *m, void *data)
{
struct drm_i915_private *dev_priv = node_to_i915(m->private);
- u32 psrperf = 0;
- bool enabled = false;
- bool sink_support;
+ struct i915_psr *psr = &dev_priv->psr;
+ const char *status;
+ bool enabled;
+ u32 val;
if (!HAS_PSR(dev_priv))
return -ENODEV;
- sink_support = dev_priv->psr.sink_support;
- seq_printf(m, "Sink_Support: %s\n", yesno(sink_support));
- if (!sink_support)
+ seq_printf(m, "Sink support: %s", yesno(psr->sink_support));
+ if (!psr->sink_support) {
+ seq_puts(m, "\n");
return 0;
+ }
intel_runtime_pm_get(dev_priv);
+ mutex_lock(&psr->lock);
- mutex_lock(&dev_priv->psr.lock);
- seq_printf(m, "PSR mode: %s\n",
- dev_priv->psr.psr2_enabled ? "PSR2" : "PSR1");
- seq_printf(m, "Enabled: %s\n", yesno(dev_priv->psr.enabled));
- seq_printf(m, "Busy frontbuffer bits: 0x%03x\n",
- dev_priv->psr.busy_frontbuffer_bits);
+ seq_printf(m, " [0x%08x]\n", psr->dp->psr_dpcd[0]);
- if (dev_priv->psr.psr2_enabled)
- enabled = I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE;
+ if (psr->enabled)
+ status = psr->psr2_enabled ? "PSR2 enabled" : "PSR1 enabled";
else
- enabled = I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE;
+ status = "disabled";
+ seq_printf(m, "Status: %s\n", status);
- seq_printf(m, "Main link in standby mode: %s\n",
- yesno(dev_priv->psr.link_standby));
+ if (!psr->enabled)
+ goto unlock;
- seq_printf(m, "HW Enabled & Active bit: %s\n", yesno(enabled));
+ if (psr->psr2_enabled) {
+ val = I915_READ(EDP_PSR2_CTL);
+ enabled = val & EDP_PSR2_ENABLE;
+ } else {
+ val = I915_READ(EDP_PSR_CTL);
+ enabled = val & EDP_PSR_ENABLE;
+ }
+ seq_printf(m, "Source PSR ctl: %s [0x%08x]\n",
+ enableddisabled(enabled), val);
+ psr_source_status(dev_priv, m);
+ seq_printf(m, "Busy frontbuffer bits: 0x%08x\n",
+ psr->busy_frontbuffer_bits);
/*
* SKL+ Perf counter is reset to 0 everytime DC state is entered
*/
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
- psrperf = I915_READ(EDP_PSR_PERF_CNT) &
- EDP_PSR_PERF_CNT_MASK;
-
- seq_printf(m, "Performance_Counter: %u\n", psrperf);
+ val = I915_READ(EDP_PSR_PERF_CNT) & EDP_PSR_PERF_CNT_MASK;
+ seq_printf(m, "Performance counter: %u\n", val);
}
- psr_source_status(dev_priv, m);
- mutex_unlock(&dev_priv->psr.lock);
-
- if (READ_ONCE(dev_priv->psr.debug) & I915_PSR_DEBUG_IRQ) {
+ if (psr->debug & I915_PSR_DEBUG_IRQ) {
seq_printf(m, "Last attempted entry at: %lld\n",
- dev_priv->psr.last_entry_attempt);
- seq_printf(m, "Last exit at: %lld\n",
- dev_priv->psr.last_exit);
+ psr->last_entry_attempt);
+ seq_printf(m, "Last exit at: %lld\n", psr->last_exit);
}
+unlock:
+ mutex_unlock(&psr->lock);
intel_runtime_pm_put(dev_priv);
+
return 0;
}
--
2.19.2
More information about the Intel-gfx
mailing list