[Intel-gfx] [PATCH v11 00/23] drm/i915/icl: dsi enabling
Lisovskiy, Stanislav
stanislav.lisovskiy at intel.com
Wed Dec 5 08:25:29 UTC 2018
I still see this pipe config mismatch(with icl-dsi-2018-12-03(4.20.0-rc5) + "fix transcoder state readout" commit applied):
[ 12.773332] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_hdisplay (expected 1440, found 720)
[ 12.773425] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_htotal (expected 1586, found 793)
[ 12.773510] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_hblank_start (expected 1440, found 1)
[ 12.773588] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_hblank_end (expected 1586, found 1)
[ 12.773663] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_hsync_start (expected 1540, found 770)
[ 12.773735] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_hsync_end (expected 1550, found 775)
[ 12.773813] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_vblank_start (expected 2560, found 1)
[ 12.773897] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_vblank_end (expected 2582, found 1)
[ 12.773976] [drm:pipe_config_err [i915]] *ERROR* mismatch in output_format (expected 0, found 1)
[ 12.774039] [drm:pipe_config_err [i915]] *ERROR* mismatch in pixel_rate (expected 245700, found 122850)
[ 12.774099] [drm:pipe_config_err [i915]] *ERROR* mismatch in pipe_bpp (expected 24, found 0)
[ 12.774157] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_clock (expected 245700, found 122850)
To me it looks different from https://bugs.freedesktop.org/show_bug.cgi?id=108928 bug.
Also there are still "The master control interrupt lied (DE PIPE)!" messages( Pipe IIR register is read as 0, while
master_ctl has a correspondent flag set) - however with this one I can at least cope by adding a few retries in the interrupt handler as a workaround. Then the flooding stops. Not sure if this is a proper fix though.
I also run kms_draw_crc test with this board(investigating https://bugs.freedesktop.org/show_bug.cgi?id=103184),
and sometimes half of the tests fail with the crc mismatch, I think this is kind of different thing.
Best Regards,
Lisovskiy Stanislav
Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
________________________________________
From: Intel-gfx [intel-gfx-bounces at lists.freedesktop.org] on behalf of Lisovskiy, Stanislav [stanislav.lisovskiy at intel.com]
Sent: Wednesday, December 05, 2018 9:49 AM
To: Nikula, Jani; Chauhan, Madhav; intel-gfx at lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v11 00/23] drm/i915/icl: dsi enabling
Hi Jani,
I've tried previously with branch icl-dsi-2018-12-03 for your github repo.
I think it has everything except this 4.12.2018 "fix transcoder state readout" commit.
I will apply it and try with that now, thanks.
Best Regards,
Lisovskiy Stanislav
Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
________________________________________
From: Nikula, Jani
Sent: Tuesday, December 04, 2018 7:13 PM
To: Lisovskiy, Stanislav; Chauhan, Madhav; intel-gfx at lists.freedesktop.org
Cc: ville.syrjala at linux.intel.com; Kulkarni, Vandita; Deak, Imre
Subject: RE: [PATCH v11 00/23] drm/i915/icl: dsi enabling
On Tue, 04 Dec 2018, "Lisovskiy, Stanislav" <stanislav.lisovskiy at intel.com> wrote:
> Hi,
>
> Currently ICL DSI panel seems to work fine, however I still face
> mainly two issues, which probably need to be addressed:
Please try with current drm-tip with
commit 0716931a82b4d0e211d2ef66616ad7130107e455
Author: Jani Nikula <jani.nikula at intel.com>
Date: Tue Dec 4 12:19:26 2018 +0200
drm/i915/icl: fix transcoder state readout
plus the hack patches from the end of the series. It's possible only the
VBT one is required.
BR,
Jani.
>
> 1) There is still pipe_config mismatch assertion:
>
> [ 13.119965] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_hdisplay (expected 1440, found 720)
> [ 13.119989] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_htotal (expected 1586, found 793)
> [ 13.120015] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_hblank_start (expected 1440, found 1)
> [ 13.120038] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_hblank_end (expected 1586, found 1)
> [ 13.120061] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_hsync_start (expected 1540, found 770)
> [ 13.120083] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_hsync_end (expected 1550, found 775)
> [ 13.120113] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_vblank_start (expected 2560, found 1)
> [ 13.120139] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_vblank_end (expected 2582, found 1)
> [ 13.120169] [drm:pipe_config_err [i915]] *ERROR* mismatch in output_format (expected 0, found 1)
> [ 13.120188] [drm:pipe_config_err [i915]] *ERROR* mismatch in pixel_rate (expected 245700, found 122850)
> [ 13.120207] [drm:pipe_config_err [i915]] *ERROR* mismatch in pipe_bpp (expected 24, found 0)
> [ 13.120225] [drm:pipe_config_err [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_clock (expected 245700, found 122850)
>
> Also whenever I run some suspend test case(for example I use igt at kms_vblank@pipe-a-ts-continuation-suspend
> I start to get it everytime machine wakes up, DSI panel get blank and doesn't recover from that.
>
> 2) During reboot, there are sometimes flood of "The master control interrupt lied (DE PIPE)!" messages visible.
> Looks like GEN8_DE_PIPE_IIR(pipe) which reads as 0 toggles this. Looks like also if I add a few retries it reads
> correctly.
>
> Could this be also because I'm still using old BIOS, which I've got initially from Vandita?
>
> Best Regards,
>
> Lisovskiy Stanislav
>
> Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
>
> ________________________________________
> From: Chauhan, Madhav
> Sent: Tuesday, December 04, 2018 9:40 AM
> To: Nikula, Jani; intel-gfx at lists.freedesktop.org
> Cc: ville.syrjala at linux.intel.com; Kulkarni, Vandita; Lisovskiy, Stanislav; Deak, Imre
> Subject: RE: [PATCH v11 00/23] drm/i915/icl: dsi enabling
>
>> -----Original Message-----
>> From: Nikula, Jani
>> Sent: Monday, December 3, 2018 7:39 PM
>> To: intel-gfx at lists.freedesktop.org
>> Cc: ville.syrjala at linux.intel.com; Chauhan, Madhav
>> <madhav.chauhan at intel.com>; Kulkarni, Vandita
>> <vandita.kulkarni at intel.com>; Lisovskiy, Stanislav
>> <stanislav.lisovskiy at intel.com>; Deak, Imre <imre.deak at intel.com>
>> Subject: Re: [PATCH v11 00/23] drm/i915/icl: dsi enabling
>>
>> On Thu, 29 Nov 2018, Jani Nikula <jani.nikula at intel.com> wrote:
>> > v11 of [1], incorporating DSI PLL work [2] from Vandita as well as PLL
>> > mapping and gating patches [3] from me and [4] from Imre.
>> >
>> > It made sense to squash some patches in [1] and [2] together, I've
>> > tried to set authorship and co-developed-by tags fairly.
>> >
>> > The series is also available in icl-dsi-2018-11-29 branch of my fdo
>> > git repo [5].
>>
>> Pushed the series to dinq except for the three HACK patches at the end.
>> They'll still need to be addressed one way or another.
>>
>> Thanks everyone for your contributions in writing the patches, reviewing,
>> testing, etc. It's been a long ride!
>
> Thanks a lot to you as well Jani N for your continuous support during design/development/review/merge
> Of this new/big feature :)
>
> Regards,
> Madhav
>
>>
>> BR,
>> Jani.
>>
>>
>>
>> >
>> >
>> > BR,
>> > Jani.
>> >
>> >
>> > [1] https://patchwork.freedesktop.org/series/51011/
>> > [2] https://patchwork.freedesktop.org/series/51373/
>> > [3]
>> > http://patchwork.freedesktop.org/patch/msgid/20181129115715.9152-1-
>> jan
>> > i.nikula at intel.com [4]
>> > http://patchwork.freedesktop.org/patch/msgid/20181127163606.28841-1-
>> im
>> > re.deak at intel.com [5] https://cgit.freedesktop.org/~jani/drm/
>> >
>> >
>> > Imre Deak (1):
>> > drm/i915/icl: Sanitize DDI port clock gating for DSI ports
>> >
>> > Jani Nikula (4):
>> > drm/i915/icl: push pll to port mapping/unmapping to ddi encoder hooks
>> > drm/i915/icl: add dummy DSI GPIO element execution function
>> > drm/i915/icl: add pll mapping for DSI
>> > HACK: drm/i915/bios: ignore VBT not overflowing the mailbox
>> >
>> > Madhav Chauhan (16):
>> > drm/i915/icl: Calculate DPLL params for DSI
>> > drm/i915/icl: Allocate DSI encoder/connector
>> > drm/i915/icl: Fill DSI ports info
>> > drm/i915/icl: Allocate DSI hosts and imlement host transfer
>> > drm/i915/icl: Get HW state for DSI encoder
>> > drm/i915/icl: Add DSI encoder compute config hook
>> > drm/i915/icl: Configure DSI Dual link mode
>> > drm/i915/icl: Consider DSI for getting transcoder state
>> > drm/i915/icl: Get pipe timings for DSI
>> > drm/i915/icl: Define missing bitfield for shortplug reg
>> > drm/i915/icl: Define Panel power ctrl register
>> > drm/i915/icl: Define display GPIO pins for DSI
>> > drm/i915/icl: Gate clocks for DSI
>> > drm/i915/icl: Ungate DSI clocks
>> > HACK: drm/i915/icl: Add changes to program DSI panel GPIOs
>> > HACK: drm/i915/icl: Configure backlight functions for DSI
>> >
>> > Vandita Kulkarni (2):
>> > drm/i915/icl: Use the same pll functions for dsi
>> > drm/i915/icl: Add get config functionality for DSI
>> >
>> > drivers/gpu/drm/i915/i915_reg.h | 12 +
>> > drivers/gpu/drm/i915/icl_dsi.c | 492
>> +++++++++++++++++++++++++++++++++-
>> > drivers/gpu/drm/i915/intel_bios.c | 1 -
>> > drivers/gpu/drm/i915/intel_ddi.c | 153 ++++++-----
>> > drivers/gpu/drm/i915/intel_display.c | 44 +--
>> > drivers/gpu/drm/i915/intel_dpll_mgr.c | 3 +-
>> > drivers/gpu/drm/i915/intel_drv.h | 8 +-
>> > drivers/gpu/drm/i915/intel_dsi.h | 5 +
>> > drivers/gpu/drm/i915/intel_dsi_vbt.c | 58 +++-
>> > drivers/gpu/drm/i915/intel_panel.c | 3 +-
>> > 10 files changed, 674 insertions(+), 105 deletions(-)
>>
>> --
>> Jani Nikula, Intel Open Source Graphics Center
>
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx at lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list