[Intel-gfx] [PATCH v4 4/4] drm/i915: Increase timeout for Encrypt status change
Ramalingam C
ramalingam.c at intel.com
Wed Dec 5 11:44:43 UTC 2018
At enable/disable of the HDCP encryption, for encryption status change
we need minimum one frame duration. And we might program this bit any
point(start/End) in the previous frame.
With 20mSec, observed the timeout for change in encryption status.
Since this is not time critical operation and we need to hold on
until the status is changed, fixing the timeout to 50mSec. (Based on
trial and error method!)
v2:
%s/TIME_FOR_ENCRYPT_STATUS_CHANGE/ENCRYPT_STATUS_CHANGE_TIMEOUT_MS
[Sean Paul]
Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
Reviewed-by: Sean Paul <sean at poorly.run>
---
drivers/gpu/drm/i915/intel_hdcp.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_hdcp.c b/drivers/gpu/drm/i915/intel_hdcp.c
index 1e5a1e07e343..e000e54ad569 100644
--- a/drivers/gpu/drm/i915/intel_hdcp.c
+++ b/drivers/gpu/drm/i915/intel_hdcp.c
@@ -15,6 +15,7 @@
#include "i915_reg.h"
#define KEY_LOAD_TRIES 5
+#define ENCRYPT_STATUS_CHANGE_TIMEOUT_MS 50
static
bool intel_hdcp_is_ksv_valid(u8 *ksv)
@@ -637,7 +638,8 @@ static int intel_hdcp_auth(struct intel_digital_port *intel_dig_port,
/* Wait for encryption confirmation */
if (intel_wait_for_register(dev_priv, PORT_HDCP_STATUS(port),
- HDCP_STATUS_ENC, HDCP_STATUS_ENC, 20)) {
+ HDCP_STATUS_ENC, HDCP_STATUS_ENC,
+ ENCRYPT_STATUS_CHANGE_TIMEOUT_MS)) {
DRM_ERROR("Timed out waiting for encryption\n");
return -ETIMEDOUT;
}
@@ -667,7 +669,7 @@ static int _intel_hdcp_disable(struct intel_connector *connector)
I915_WRITE(PORT_HDCP_CONF(port), 0);
if (intel_wait_for_register(dev_priv, PORT_HDCP_STATUS(port), ~0, 0,
- 20)) {
+ ENCRYPT_STATUS_CHANGE_TIMEOUT_MS)) {
DRM_ERROR("Failed to disable HDCP, timeout clearing status\n");
return -ETIMEDOUT;
}
--
2.7.4
More information about the Intel-gfx
mailing list