[Intel-gfx] [PATCH 19/27] drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection

[Tvrtko Ursulin]

On 09/01/2018 23:28, Paulo Zanoni wrote:
> From: Kelvin Gardiner <kelvin.gardiner at intel.com>
> 
> This patch adds support to detect ICL, slice, subslice and EU fuse
> settings.
> 
> Add addresses for ICL 11 slice, subslice and EU fuses registers.
> These register addresses are the same as previous platforms but the
> format and / or the meaning of the information is different. Therefore
> Gen11 defines for these registers are added.
> 
> Bspec: 9731
> Bspec: 20643
> Bspec: 20673
> 
> Signed-off-by: Kelvin Gardiner <kelvin.gardiner at intel.com>
> ---
>   drivers/gpu/drm/i915/i915_reg.h          |  9 +++++++++
>   drivers/gpu/drm/i915/intel_device_info.c | 25 ++++++++++++++++++++++++-
>   2 files changed, 33 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index c9b62502ce69..d8b537570b8e 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -2809,6 +2809,15 @@ enum i915_power_well_id {
>   #define GEN11_GT_VEBOX_DISABLE_SHIFT	16
>   #define GEN11_GT_VEBOX_DISABLE_MASK	(0xff << GEN11_GT_VEBOX_DISABLE_SHIFT)
>   
> +#define GEN11_EU_DISABLE _MMIO(0x9134)
> +#define GEN11_EU_DIS_MASK 0xFF
> +
> +#define GEN11_GT_SLICE_ENABLE _MMIO(0x9138)
> +#define GEN11_GT_S_ENA_MASK 0xFF
> +
> +#define GEN11_GT_SUBSLICE_DISABLE _MMIO(0x913C)
> +#define GEN11_GT_SS_DIS_MASK 0xFF
> +
>   #define GEN6_BSD_SLEEP_PSMI_CONTROL	_MMIO(0x12050)
>   #define   GEN6_BSD_SLEEP_MSG_DISABLE	(1 << 0)
>   #define   GEN6_BSD_SLEEP_FLUSH_DISABLE	(1 << 2)
> diff --git a/drivers/gpu/drm/i915/intel_device_info.c b/drivers/gpu/drm/i915/intel_device_info.c
> index 3316470363a0..895c41ef4abf 100644
> --- a/drivers/gpu/drm/i915/intel_device_info.c
> +++ b/drivers/gpu/drm/i915/intel_device_info.c
> @@ -120,6 +120,27 @@ void intel_device_info_dump(const struct intel_device_info *info,
>   	intel_device_info_dump_flags(info, p);
>   }
>   
> +static void gen11_sseu_info_init(struct drm_i915_private *dev_priv)
> +{
> +	struct sseu_dev_info *sseu = &mkwrite_device_info(dev_priv)->sseu;
> +	int eu_max = 8;
> +	u32 eu_disable;
> +
> +	sseu->slice_mask = I915_READ(GEN11_GT_SLICE_ENABLE) &
> +				GEN11_GT_S_ENA_MASK;
> +	sseu->subslice_mask = ~(I915_READ(GEN11_GT_SUBSLICE_DISABLE) &
> +				GEN11_GT_SS_DIS_MASK);
> +	eu_disable = I915_READ(GEN11_EU_DISABLE) & GEN11_GT_S_ENA_MASK;
> +
> +	sseu->eu_per_subslice = eu_max - hweight32(eu_disable);
> +	sseu->eu_total = sseu->eu_per_subslice * hweight32(sseu->subslice_mask);
> +
> +	/* ICL has no power gating restrictions. */
> +	sseu->has_slice_pg = 1;
> +	sseu->has_subslice_pg = 1;
> +	sseu->has_eu_pg = 1;
> +}
> +
>   static void gen10_sseu_info_init(struct drm_i915_private *dev_priv)
>   {
>   	struct sseu_dev_info *sseu = &mkwrite_device_info(dev_priv)->sseu;
> @@ -583,8 +604,10 @@ void intel_device_info_runtime_init(struct intel_device_info *info)
>   		broadwell_sseu_info_init(dev_priv);
>   	else if (INTEL_GEN(dev_priv) == 9)
>   		gen9_sseu_info_init(dev_priv);
> -	else if (INTEL_GEN(dev_priv) >= 10)
> +	else if (INTEL_GEN(dev_priv) == 10)

We usually use IS_GEN10 and the == construct is very rare. I suggest to 
change in while touching the line.

>   		gen10_sseu_info_init(dev_priv);
> +	else if (INTEL_INFO(dev_priv)->gen >= 11)

INTEL_GEN should be used in new code.

Regards,

Tvrtko

> +		gen11_sseu_info_init(dev_priv);
>   
>   	/* Initialize command stream timestamp frequency */
>   	info->cs_timestamp_frequency_khz = read_timestamp_frequency(dev_priv);
>