[Intel-gfx] [PATCH] drm/i915/guc: Redefine guc_log_level modparam values
Michal Wajdeczko
michal.wajdeczko at intel.com
Wed Jan 10 16:05:24 UTC 2018
We used value -1 to indicate "disabled" and values 0..3 to
indicate "enabled", but most of our other modparams are using
-1 for "auto" mode and 0 for "disable". For consistency let's
change our log level values to:
-1: auto (depends on USES_GUC and DRM_I915_DEBUG)
0: disabled
1: enabled (severity level 0 = min)
2: enabled (severity level 1)
3: enabled (severity level 2)
4: enabled (severity level 3 = max)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko at intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble at intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio at intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
Cc: Chris Wilson <chris at chris-wilson.co.uk>
---
drivers/gpu/drm/i915/i915_params.c | 3 ++-
drivers/gpu/drm/i915/intel_guc.c | 21 ++++++++++-----
drivers/gpu/drm/i915/intel_guc_log.c | 47 ++++++++++++++++-----------------
drivers/gpu/drm/i915/intel_uc.c | 51 ++++++++++++++++++++++++++++++++++--
4 files changed, 87 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
index b5f3eb4..0b553a8 100644
--- a/drivers/gpu/drm/i915/i915_params.c
+++ b/drivers/gpu/drm/i915/i915_params.c
@@ -155,7 +155,8 @@ struct i915_params i915_modparams __read_mostly = {
"(-1=auto, 0=disable [default], 1=GuC submission, 2=HuC load)");
i915_param_named(guc_log_level, int, 0400,
- "GuC firmware logging level (-1:disabled (default), 0-3:enabled)");
+ "GuC firmware logging level. Requires GuC to be loaded. "
+ "(-1=auto [default], 0=disable, 1..4=enable with verbosity min..max)");
i915_param_named_unsafe(guc_firmware_path, charp, 0400,
"GuC firmware path to use instead of the default one");
diff --git a/drivers/gpu/drm/i915/intel_guc.c b/drivers/gpu/drm/i915/intel_guc.c
index 50b4725..2227236 100644
--- a/drivers/gpu/drm/i915/intel_guc.c
+++ b/drivers/gpu/drm/i915/intel_guc.c
@@ -215,6 +215,18 @@ static u32 get_core_family(struct drm_i915_private *dev_priv)
}
}
+static u32 get_log_verbosity_flags(void)
+{
+ if (i915_modparams.guc_log_level > 0) {
+ u32 verbosity = i915_modparams.guc_log_level - 1;
+
+ GEM_BUG_ON(verbosity > GUC_LOG_VERBOSITY_MAX);
+ return verbosity << GUC_LOG_VERBOSITY_SHIFT;
+ }
+ GEM_BUG_ON(i915_modparams.enable_guc < 0);
+ return GUC_LOG_DISABLED;
+}
+
/*
* Initialise the GuC parameter block before starting the firmware
* transfer. These parameters are read by the firmware on startup
@@ -247,12 +259,7 @@ void intel_guc_init_params(struct intel_guc *guc)
params[GUC_CTL_LOG_PARAMS] = guc->log.flags;
- if (i915_modparams.guc_log_level >= 0) {
- params[GUC_CTL_DEBUG] =
- i915_modparams.guc_log_level << GUC_LOG_VERBOSITY_SHIFT;
- } else {
- params[GUC_CTL_DEBUG] = GUC_LOG_DISABLED;
- }
+ params[GUC_CTL_DEBUG] = get_log_verbosity_flags();
/* If GuC submission is enabled, set up additional parameters here */
if (USES_GUC_SUBMISSION(dev_priv)) {
@@ -445,7 +452,7 @@ int intel_guc_resume(struct drm_i915_private *dev_priv)
if (guc->fw.load_status != INTEL_UC_FIRMWARE_SUCCESS)
return 0;
- if (i915_modparams.guc_log_level >= 0)
+ if (i915_modparams.guc_log_level > 0)
gen9_enable_guc_interrupts(dev_priv);
data[0] = INTEL_GUC_ACTION_EXIT_S_STATE;
diff --git a/drivers/gpu/drm/i915/intel_guc_log.c b/drivers/gpu/drm/i915/intel_guc_log.c
index eaedd63..e6d59bf 100644
--- a/drivers/gpu/drm/i915/intel_guc_log.c
+++ b/drivers/gpu/drm/i915/intel_guc_log.c
@@ -33,11 +33,10 @@
/**
* DOC: GuC firmware log
*
- * Firmware log is enabled by setting i915.guc_log_level to non-negative level.
+ * Firmware log is enabled by setting i915.guc_log_level to the positive level.
* Log data is printed out via reading debugfs i915_guc_log_dump. Reading from
* i915_guc_load_status will print out firmware loading status and scratch
* registers value.
- *
*/
static int guc_log_flush_complete(struct intel_guc *guc)
@@ -147,7 +146,7 @@ static int guc_log_relay_file_create(struct intel_guc *guc)
struct dentry *log_dir;
int ret;
- if (i915_modparams.guc_log_level < 0)
+ if (!i915_modparams.guc_log_level)
return 0;
/* For now create the log file in /sys/kernel/debug/dri/0 dir */
@@ -423,8 +422,8 @@ static void guc_log_runtime_destroy(struct intel_guc *guc)
{
/*
* It's possible that the runtime stuff was never allocated because
- * guc_log_level was < 0 at the time
- **/
+ * GuC log was disabled at the boot time.
+ */
if (!guc_log_has_runtime(guc))
return;
@@ -441,9 +440,10 @@ static int guc_log_late_setup(struct intel_guc *guc)
lockdep_assert_held(&dev_priv->drm.struct_mutex);
if (!guc_log_has_runtime(guc)) {
- /* If log_level was set as -1 at boot time, then setup needed to
- * handle log buffer flush interrupts would not have been done yet,
- * so do that now.
+ /*
+ * If log was disabled at boot time, then setup needed to handle
+ * log buffer flush interrupts would not have been done yet, so
+ * do that now.
*/
ret = guc_log_runtime_create(guc);
if (ret)
@@ -460,7 +460,7 @@ static int guc_log_late_setup(struct intel_guc *guc)
guc_log_runtime_destroy(guc);
err:
/* logging will remain off */
- i915_modparams.guc_log_level = -1;
+ i915_modparams.guc_log_level = 0;
return ret;
}
@@ -482,8 +482,7 @@ static void guc_flush_logs(struct intel_guc *guc)
{
struct drm_i915_private *dev_priv = guc_to_i915(guc);
- if (!USES_GUC_SUBMISSION(dev_priv) ||
- (i915_modparams.guc_log_level < 0))
+ if (!USES_GUC_SUBMISSION(dev_priv) || !i915_modparams.guc_log_level)
return;
/* First disable the interrupts, will be renabled afterwards */
@@ -511,9 +510,6 @@ int intel_guc_log_create(struct intel_guc *guc)
GEM_BUG_ON(guc->log.vma);
- if (i915_modparams.guc_log_level > GUC_LOG_VERBOSITY_MAX)
- i915_modparams.guc_log_level = GUC_LOG_VERBOSITY_MAX;
-
/* The first page is to save log buffer state. Allocate one
* extra page for others in case for overlap */
size = (1 + GUC_LOG_DPC_PAGES + 1 +
@@ -537,7 +533,7 @@ int intel_guc_log_create(struct intel_guc *guc)
guc->log.vma = vma;
- if (i915_modparams.guc_log_level >= 0) {
+ if (i915_modparams.guc_log_level) {
ret = guc_log_runtime_create(guc);
if (ret < 0)
goto err_vma;
@@ -558,7 +554,7 @@ int intel_guc_log_create(struct intel_guc *guc)
i915_vma_unpin_and_release(&guc->log.vma);
err:
/* logging will be off */
- i915_modparams.guc_log_level = -1;
+ i915_modparams.guc_log_level = 0;
return ret;
}
@@ -582,7 +578,7 @@ int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val)
return -EINVAL;
/* This combination doesn't make sense & won't have any effect */
- if (!log_param.logging_enabled && (i915_modparams.guc_log_level < 0))
+ if (!log_param.logging_enabled && !i915_modparams.guc_log_level)
return 0;
ret = guc_log_control(guc, log_param.value);
@@ -592,11 +588,12 @@ int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val)
}
if (log_param.logging_enabled) {
- i915_modparams.guc_log_level = log_param.verbosity;
+ i915_modparams.guc_log_level = 1 + log_param.verbosity;
- /* If log_level was set as -1 at boot time, then the relay channel file
- * wouldn't have been created by now and interrupts also would not have
- * been enabled. Try again now, just in case.
+ /*
+ * If log was disabled at boot time, then the relay channel file
+ * wouldn't have been created by now and interrupts also would
+ * not have been enabled. Try again now, just in case.
*/
ret = guc_log_late_setup(guc);
if (ret < 0) {
@@ -607,7 +604,8 @@ int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val)
/* GuC logging is currently the only user of Guc2Host interrupts */
gen9_enable_guc_interrupts(dev_priv);
} else {
- /* Once logging is disabled, GuC won't generate logs & send an
+ /*
+ * Once logging is disabled, GuC won't generate logs & send an
* interrupt. But there could be some data in the log buffer
* which is yet to be captured. So request GuC to update the log
* buffer state and then collect the left over logs.
@@ -615,7 +613,7 @@ int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val)
guc_flush_logs(guc);
/* As logging is disabled, update log level to reflect that */
- i915_modparams.guc_log_level = -1;
+ i915_modparams.guc_log_level = 0;
}
return ret;
@@ -623,8 +621,7 @@ int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val)
void i915_guc_log_register(struct drm_i915_private *dev_priv)
{
- if (!USES_GUC_SUBMISSION(dev_priv) ||
- (i915_modparams.guc_log_level < 0))
+ if (!USES_GUC_SUBMISSION(dev_priv) || !i915_modparams.guc_log_level)
return;
mutex_lock(&dev_priv->drm.struct_mutex);
diff --git a/drivers/gpu/drm/i915/intel_uc.c b/drivers/gpu/drm/i915/intel_uc.c
index d82ca0f..fd39c06 100644
--- a/drivers/gpu/drm/i915/intel_uc.c
+++ b/drivers/gpu/drm/i915/intel_uc.c
@@ -65,6 +65,21 @@ static int __get_platform_enable_guc(struct drm_i915_private *dev_priv)
return enable_guc;
}
+static int __get_default_guc_log_level(struct drm_i915_private *dev_priv)
+{
+ int guc_log_level = 0; /* disabled */
+
+ /* Enable if we're running on platform with GuC and debug config */
+ if (HAS_GUC(dev_priv) && intel_uc_is_using_guc() &&
+ (IS_ENABLED(CONFIG_DRM_I915_DEBUG) ||
+ IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM)))
+ guc_log_level = 1 + GUC_LOG_VERBOSITY_MAX;
+
+ /* Any platform specific fine-tuning can be done here */
+
+ return guc_log_level;
+}
+
/**
* intel_uc_sanitize_options - sanitize uC related modparam options
* @dev_priv: device private
@@ -74,6 +89,13 @@ static int __get_platform_enable_guc(struct drm_i915_private *dev_priv)
* modparam varies between platforms and it is hardcoded in driver code.
* Any other modparam value is only monitored against availability of the
* related hardware or firmware definitions.
+ *
+ * In case of "guc_log_level" option this function will attempt to modify
+ * it only if it was initially set to "auto(-1)" or if initial value was
+ * "enable(1..4)" on platforms without the GuC. Default value for this
+ * modparam varies between platforms and is usually set to "disable(0)"
+ * unless GuC is enabled on given platform and the driver is compiled with
+ * debug config when this modparam will default to "enable(1..4)".
*/
void intel_uc_sanitize_options(struct drm_i915_private *dev_priv)
{
@@ -105,8 +127,33 @@ void intel_uc_sanitize_options(struct drm_i915_private *dev_priv)
"no HuC firmware");
}
+ /* A negative value means "use platform/config default" */
+ if (i915_modparams.guc_log_level < 0)
+ i915_modparams.guc_log_level =
+ __get_default_guc_log_level(dev_priv);
+
+ DRM_DEBUG_DRIVER("guc_log_level=%d (enabled:%s verbosity:%d)\n",
+ i915_modparams.guc_log_level,
+ yesno(i915_modparams.guc_log_level > 0),
+ i915_modparams.guc_log_level - 1);
+
+ if (i915_modparams.guc_log_level > 0 && !intel_uc_is_using_guc()) {
+ DRM_WARN("Incompatible option ignored: guc_log_level=%d, %s!\n",
+ i915_modparams.guc_log_level,
+ !HAS_GUC(dev_priv) ? "no GuC hardware" :
+ "GuC not enabled");
+ i915_modparams.guc_log_level = 0;
+ }
+
+ if (i915_modparams.guc_log_level > 1 + GUC_LOG_VERBOSITY_MAX) {
+ DRM_WARN("Incompatible option ignored: guc_log_level=%d, %s!\n",
+ i915_modparams.guc_log_level, "verbosity too high");
+ i915_modparams.guc_log_level = 1 + GUC_LOG_VERBOSITY_MAX;
+ }
+
/* Make sure that sanitization was done */
GEM_BUG_ON(i915_modparams.enable_guc < 0);
+ GEM_BUG_ON(i915_modparams.guc_log_level < 0);
}
void intel_uc_init_early(struct drm_i915_private *dev_priv)
@@ -152,7 +199,7 @@ void intel_uc_init_mmio(struct drm_i915_private *dev_priv)
static void guc_capture_load_err_log(struct intel_guc *guc)
{
- if (!guc->log.vma || i915_modparams.guc_log_level < 0)
+ if (!guc->log.vma || !i915_modparams.guc_log_level)
return;
if (!guc->load_err_log)
@@ -322,7 +369,7 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
}
if (USES_GUC_SUBMISSION(dev_priv)) {
- if (i915_modparams.guc_log_level >= 0)
+ if (i915_modparams.guc_log_level)
gen9_enable_guc_interrupts(dev_priv);
ret = intel_guc_submission_enable(guc);
--
1.9.1
More information about the Intel-gfx
mailing list