[Intel-gfx] [PATCH 5/8] drm/i915/icp: Add Panel Power Sequencing Support

[Paulo Zanoni]

From: Anusha Srivatsa <anusha.srivatsa at intel.com>

ICP, like BXT, has has two panel power sequencers.

v2: Simplify the code. Remove unwanted register definitions.
Make code as close to BXT style as possible. (Ville)
Also, remove the use of ICP_SECOND_PPS_BACKLIGHT for now.
Moving forward, if we are sure we need to set this register,
we can access it.

v3: Use INTEL_GEN(dev_priv), make code more readeable. (Ville)

v4 (from Paulo):
 - Coding style fixes.
 - Add a missing HAS_PCH_CNP -> gen10+ check.
 - Rebase.

v5: Use per platform checks rather than INTEL_GEN().
    v4 of this patch breaks on CoffeeLake, since CFL uses
    CNP and per platform check makes sense in that case.

v6 (from Paulo):
 - v5 was a patch on top of v4, not a new version. Now v6 is correctly
   a new version of the original patch.

Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 46937a8c48cc..cdfdacf27939 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -796,7 +796,8 @@ static void intel_pps_get_registers(struct intel_dp *intel_dp,
 	regs->pp_stat = PP_STATUS(pps_idx);
 	regs->pp_on = PP_ON_DELAYS(pps_idx);
 	regs->pp_off = PP_OFF_DELAYS(pps_idx);
-	if (!IS_GEN9_LP(dev_priv) && !HAS_PCH_CNP(dev_priv))
+	if (!IS_GEN9_LP(dev_priv) && !HAS_PCH_CNP(dev_priv) &&
+	    !HAS_PCH_ICP(dev_priv))
 		regs->pp_div = PP_DIVISOR(pps_idx);
 }
 
@@ -5453,7 +5454,8 @@ intel_pps_readout_hw_state(struct intel_dp *intel_dp, struct edp_power_seq *seq)
 
 	pp_on = I915_READ(regs.pp_on);
 	pp_off = I915_READ(regs.pp_off);
-	if (!IS_GEN9_LP(dev_priv) && !HAS_PCH_CNP(dev_priv)) {
+	if (!IS_GEN9_LP(dev_priv) && !HAS_PCH_CNP(dev_priv) &&
+	    !HAS_PCH_ICP(dev_priv)) {
 		I915_WRITE(regs.pp_ctrl, pp_ctl);
 		pp_div = I915_READ(regs.pp_div);
 	}
@@ -5471,7 +5473,8 @@ intel_pps_readout_hw_state(struct intel_dp *intel_dp, struct edp_power_seq *seq)
 	seq->t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >>
 		   PANEL_POWER_DOWN_DELAY_SHIFT;
 
-	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) {
+	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv) ||
+	    HAS_PCH_ICP(dev_priv)) {
 		seq->t11_t12 = ((pp_ctl & BXT_POWER_CYCLE_DELAY_MASK) >>
 				BXT_POWER_CYCLE_DELAY_SHIFT) * 1000;
 	} else {
@@ -5642,7 +5645,8 @@ intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
 		 (seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT);
 	/* Compute the divisor for the pp clock, simply match the Bspec
 	 * formula. */
-	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) {
+	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv) ||
+	    HAS_PCH_ICP(dev_priv)) {
 		pp_div = I915_READ(regs.pp_ctrl);
 		pp_div &= ~BXT_POWER_CYCLE_DELAY_MASK;
 		pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000)
@@ -5668,7 +5672,8 @@ intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
 
 	I915_WRITE(regs.pp_on, pp_on);
 	I915_WRITE(regs.pp_off, pp_off);
-	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv))
+	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv) ||
+	    HAS_PCH_ICP(dev_priv))
 		I915_WRITE(regs.pp_ctrl, pp_div);
 	else
 		I915_WRITE(regs.pp_div, pp_div);
@@ -5676,7 +5681,8 @@ intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
 	DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
 		      I915_READ(regs.pp_on),
 		      I915_READ(regs.pp_off),
-		      (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) ?
+		      (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)  ||
+		       HAS_PCH_ICP(dev_priv)) ?
 		      (I915_READ(regs.pp_ctrl) & BXT_POWER_CYCLE_DELAY_MASK) :
 		      I915_READ(regs.pp_div));
 }
-- 
2.14.3