[Intel-gfx] [PATCH] drm/i915: Add tracking for CDCLK bypass frequency
Imre Deak
imre.deak at intel.com
Thu Jan 18 14:21:49 UTC 2018
On Wed, Jan 17, 2018 at 07:56:22PM +0200, Ville Syrjälä wrote:
> On Wed, Jan 17, 2018 at 07:25:08PM +0200, Imre Deak wrote:
> > The CDCLK bypass frequency can vary on upcoming platforms, so prepare
> > for that now by tracking its value in the CDCLK state.
> >
> > Currently on BDW+ the bypass frequency is always the reference clock and
> > I didn't bother with earlier platforms since it's not all that clear
> > what's the bypass clock on those.
> >
> > I also didn't bother adding support for changing this frequency, since
> > atm I don't see any need for it.
> >
> > Suggested-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Signed-off-by: Imre Deak <imre.deak at intel.com>
> > ---
> > drivers/gpu/drm/i915/i915_drv.h | 2 +-
> > drivers/gpu/drm/i915/intel_cdclk.c | 35 ++++++++++++++++++-----------------
> > 2 files changed, 19 insertions(+), 18 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > index c42015b05b47..49ccfc397feb 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -1791,7 +1791,7 @@ struct i915_oa_ops {
> > };
> >
> > struct intel_cdclk_state {
> > - unsigned int cdclk, vco, ref;
> > + unsigned int cdclk, vco, ref, bypass;
> > u8 voltage_level;
> > };
> >
> > diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
> > index ca36321eafac..f46a61d423a1 100644
> > --- a/drivers/gpu/drm/i915/intel_cdclk.c
> > +++ b/drivers/gpu/drm/i915/intel_cdclk.c
> > @@ -858,7 +858,7 @@ static void skl_get_cdclk(struct drm_i915_private *dev_priv,
> >
> > skl_dpll0_update(dev_priv, cdclk_state);
> >
> > - cdclk_state->cdclk = cdclk_state->ref;
> > + cdclk_state->cdclk = cdclk_state->bypass = cdclk_state->ref;
>
> My first instinct would have been to populate bypass in the PLL
> readout function. I guess I just think of the bypass clock more
> as a feature of the PLL. But I suppose it really doesn't matter
> where we do this.
>
> Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
My thinking was that it's CDCLK choosing either the PLL output or the
bypass clock as a source (while refclk is connected directly both to
the PLL and the CDCLK as a source); but yes doesn't matter in practice
where it's inited, I leave it as-is for now.
Thanks for the review, pushed to drm-tip.
--Imre
>
> >
> > if (cdclk_state->vco == 0)
> > goto out;
> > @@ -1006,7 +1006,7 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,
> > /* Choose frequency for this cdclk */
> > switch (cdclk) {
> > default:
> > - WARN_ON(cdclk != dev_priv->cdclk.hw.ref);
> > + WARN_ON(cdclk != dev_priv->cdclk.hw.bypass);
> > WARN_ON(vco != 0);
> > /* fall through */
> > case 308571:
> > @@ -1085,7 +1085,7 @@ static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv)
> >
> > /* Is PLL enabled and locked ? */
> > if (dev_priv->cdclk.hw.vco == 0 ||
> > - dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.ref)
> > + dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.bypass)
> > goto sanitize;
> >
> > /* DPLL okay; verify the cdclock
> > @@ -1159,7 +1159,7 @@ void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
> > {
> > struct intel_cdclk_state cdclk_state = dev_priv->cdclk.hw;
> >
> > - cdclk_state.cdclk = cdclk_state.ref;
> > + cdclk_state.cdclk = cdclk_state.bypass;
> > cdclk_state.vco = 0;
> > cdclk_state.voltage_level = skl_calc_voltage_level(cdclk_state.cdclk);
> >
> > @@ -1199,7 +1199,7 @@ static int bxt_de_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
> > {
> > int ratio;
> >
> > - if (cdclk == dev_priv->cdclk.hw.ref)
> > + if (cdclk == dev_priv->cdclk.hw.bypass)
> > return 0;
> >
> > switch (cdclk) {
> > @@ -1224,7 +1224,7 @@ static int glk_de_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
> > {
> > int ratio;
> >
> > - if (cdclk == dev_priv->cdclk.hw.ref)
> > + if (cdclk == dev_priv->cdclk.hw.bypass)
> > return 0;
> >
> > switch (cdclk) {
> > @@ -1268,7 +1268,7 @@ static void bxt_get_cdclk(struct drm_i915_private *dev_priv,
> >
> > bxt_de_pll_update(dev_priv, cdclk_state);
> >
> > - cdclk_state->cdclk = cdclk_state->ref;
> > + cdclk_state->cdclk = cdclk_state->bypass = cdclk_state->ref;
> >
> > if (cdclk_state->vco == 0)
> > goto out;
> > @@ -1352,7 +1352,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> > /* cdclk = vco / 2 / div{1,1.5,2,4} */
> > switch (DIV_ROUND_CLOSEST(vco, cdclk)) {
> > default:
> > - WARN_ON(cdclk != dev_priv->cdclk.hw.ref);
> > + WARN_ON(cdclk != dev_priv->cdclk.hw.bypass);
> > WARN_ON(vco != 0);
> > /* fall through */
> > case 2:
> > @@ -1425,7 +1425,7 @@ static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv)
> > intel_dump_cdclk_state(&dev_priv->cdclk.hw, "Current CDCLK");
> >
> > if (dev_priv->cdclk.hw.vco == 0 ||
> > - dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.ref)
> > + dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.bypass)
> > goto sanitize;
> >
> > /* DPLL okay; verify the cdclock
> > @@ -1514,7 +1514,7 @@ void bxt_uninit_cdclk(struct drm_i915_private *dev_priv)
> > {
> > struct intel_cdclk_state cdclk_state = dev_priv->cdclk.hw;
> >
> > - cdclk_state.cdclk = cdclk_state.ref;
> > + cdclk_state.cdclk = cdclk_state.bypass;
> > cdclk_state.vco = 0;
> > cdclk_state.voltage_level = bxt_calc_voltage_level(cdclk_state.cdclk);
> >
> > @@ -1574,7 +1574,7 @@ static void cnl_get_cdclk(struct drm_i915_private *dev_priv,
> >
> > cnl_cdclk_pll_update(dev_priv, cdclk_state);
> >
> > - cdclk_state->cdclk = cdclk_state->ref;
> > + cdclk_state->cdclk = cdclk_state->bypass = cdclk_state->ref;
> >
> > if (cdclk_state->vco == 0)
> > goto out;
> > @@ -1660,7 +1660,7 @@ static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
> > /* cdclk = vco / 2 / div{1,2} */
> > switch (DIV_ROUND_CLOSEST(vco, cdclk)) {
> > default:
> > - WARN_ON(cdclk != dev_priv->cdclk.hw.ref);
> > + WARN_ON(cdclk != dev_priv->cdclk.hw.bypass);
> > WARN_ON(vco != 0);
> > /* fall through */
> > case 2:
> > @@ -1705,7 +1705,7 @@ static int cnl_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
> > {
> > int ratio;
> >
> > - if (cdclk == dev_priv->cdclk.hw.ref)
> > + if (cdclk == dev_priv->cdclk.hw.bypass)
> > return 0;
> >
> > switch (cdclk) {
> > @@ -1732,7 +1732,7 @@ static void cnl_sanitize_cdclk(struct drm_i915_private *dev_priv)
> > intel_dump_cdclk_state(&dev_priv->cdclk.hw, "Current CDCLK");
> >
> > if (dev_priv->cdclk.hw.vco == 0 ||
> > - dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.ref)
> > + dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.bypass)
> > goto sanitize;
> >
> > /* DPLL okay; verify the cdclock
> > @@ -1805,7 +1805,7 @@ void cnl_uninit_cdclk(struct drm_i915_private *dev_priv)
> > {
> > struct intel_cdclk_state cdclk_state = dev_priv->cdclk.hw;
> >
> > - cdclk_state.cdclk = cdclk_state.ref;
> > + cdclk_state.cdclk = cdclk_state.bypass;
> > cdclk_state.vco = 0;
> > cdclk_state.voltage_level = cnl_calc_voltage_level(cdclk_state.cdclk);
> >
> > @@ -1846,9 +1846,10 @@ bool intel_cdclk_changed(const struct intel_cdclk_state *a,
> > void intel_dump_cdclk_state(const struct intel_cdclk_state *cdclk_state,
> > const char *context)
> > {
> > - DRM_DEBUG_DRIVER("%s %d kHz, VCO %d kHz, ref %d kHz, voltage level %d\n",
> > + DRM_DEBUG_DRIVER("%s %d kHz, VCO %d kHz, ref %d kHz, bypass %d kHz, voltage level %d\n",
> > context, cdclk_state->cdclk, cdclk_state->vco,
> > - cdclk_state->ref, cdclk_state->voltage_level);
> > + cdclk_state->ref, cdclk_state->bypass,
> > + cdclk_state->voltage_level);
> > }
> >
> > /**
> > --
> > 2.13.2
>
> --
> Ville Syrjälä
> Intel OTC
More information about the Intel-gfx
mailing list