[Intel-gfx] [PATCH 01/17] drm/i915/icl: add the main CDCLK functions
Paulo Zanoni
paulo.r.zanoni at intel.com
Tue Jan 23 19:05:20 UTC 2018
This commit adds the basic CDCLK functions, but it's still missing
pieces of the display initialization sequence.
v2:
- Implement the voltage levels.
- Rebase.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 10 +-
drivers/gpu/drm/i915/intel_cdclk.c | 253 ++++++++++++++++++++++++++++++++++++-
drivers/gpu/drm/i915/intel_drv.h | 2 +
3 files changed, 261 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index abd9ee876186..d72e206b2b9f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7113,8 +7113,12 @@ enum {
#define SKL_DFSM_PIPE_B_DISABLE (1 << 21)
#define SKL_DFSM_PIPE_C_DISABLE (1 << 28)
-#define SKL_DSSM _MMIO(0x51004)
-#define CNL_DSSM_CDCLK_PLL_REFCLK_24MHz (1 << 31)
+#define SKL_DSSM _MMIO(0x51004)
+#define CNL_DSSM_CDCLK_PLL_REFCLK_24MHz (1 << 31)
+#define ICL_DSSM_CDCLK_PLL_REFCLK_MASK (7 << 29)
+#define ICL_DSSM_CDCLK_PLL_REFCLK_24MHz (0 << 29)
+#define ICL_DSSM_CDCLK_PLL_REFCLK_19_2MHz (1 << 29)
+#define ICL_DSSM_CDCLK_PLL_REFCLK_38_4MHz (2 << 29)
#define GEN7_FF_SLICE_CS_CHICKEN1 _MMIO(0x20e0)
#define GEN9_FFSC_PERCTX_PREEMPT_CTRL (1<<14)
@@ -8760,6 +8764,8 @@ enum skl_power_gate {
#define BXT_CDCLK_CD2X_PIPE_NONE BXT_CDCLK_CD2X_PIPE(3)
#define BXT_CDCLK_SSA_PRECHARGE_ENABLE (1<<16)
#define CDCLK_FREQ_DECIMAL_MASK (0x7ff)
+#define ICL_CDCLK_CD2X_PIPE(pipe) ((pipe) << 19)
+#define ICL_CDCLK_CD2X_PIPE_NONE ICL_CDCLK_CD2X_PIPE(7)
/* LCPLL_CTL */
#define LCPLL1_CTL _MMIO(0x46010)
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index c4392ea34a3d..d867956d5a9f 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -1766,6 +1766,215 @@ static void cnl_sanitize_cdclk(struct drm_i915_private *dev_priv)
dev_priv->cdclk.hw.vco = -1;
}
+static int icl_calc_cdclk(int min_cdclk, unsigned int ref)
+{
+ int ranges_24[] = { 312000, 552000, 648000 };
+ int ranges_19_38[] = { 307200, 556800, 652800 };
+ int *ranges;
+
+ switch (ref) {
+ default:
+ MISSING_CASE(ref);
+ case 24000:
+ ranges = ranges_24;
+ break;
+ case 19200:
+ case 38400:
+ ranges = ranges_19_38;
+ break;
+ }
+
+ if (min_cdclk > ranges[1])
+ return ranges[2];
+ else if (min_cdclk > ranges[0])
+ return ranges[1];
+ else
+ return ranges[0];
+}
+
+static int icl_calc_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
+{
+ int ratio;
+
+ /* 50MHz == CDCLK PLL disabled. */
+ if (cdclk == 50000)
+ return 0;
+
+ switch (cdclk) {
+ default:
+ MISSING_CASE(cdclk);
+ case 307200:
+ case 556800:
+ case 652800:
+ WARN_ON(dev_priv->cdclk.hw.ref != 19200 &&
+ dev_priv->cdclk.hw.ref != 38400);
+ break;
+ case 312000:
+ case 552000:
+ case 648000:
+ WARN_ON(dev_priv->cdclk.hw.ref != 24000);
+ }
+
+ ratio = cdclk / (dev_priv->cdclk.hw.ref / 2);
+
+ return dev_priv->cdclk.hw.ref * ratio;
+}
+
+static void icl_set_cdclk(struct drm_i915_private *dev_priv,
+ const struct intel_cdclk_state *cdclk_state)
+{
+ unsigned int cdclk = cdclk_state->cdclk;
+ unsigned int vco = cdclk_state->vco;
+ int ret;
+ u32 voltage_level;
+
+ mutex_lock(&dev_priv->pcu_lock);
+ ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
+ SKL_CDCLK_PREPARE_FOR_CHANGE,
+ SKL_CDCLK_READY_FOR_CHANGE,
+ SKL_CDCLK_READY_FOR_CHANGE, 3);
+ mutex_unlock(&dev_priv->pcu_lock);
+ if (ret) {
+ DRM_ERROR("Failed to inform PCU about cdclk change (%d)\n",
+ ret);
+ return;
+ }
+
+ /* FIXME: We should also consider the DDI clock here. */
+ switch (cdclk) {
+ case 307200:
+ case 312000:
+ voltage_level = 0;
+ break;
+ case 556800:
+ case 552000:
+ voltage_level = 1;
+ break;
+ default:
+ MISSING_CASE(cdclk);
+ case 652800:
+ case 648000:
+ voltage_level = 2;
+ break;
+ }
+
+ if (dev_priv->cdclk.hw.vco != 0 &&
+ dev_priv->cdclk.hw.vco != vco)
+ cnl_cdclk_pll_disable(dev_priv);
+
+ if (dev_priv->cdclk.hw.vco != vco)
+ cnl_cdclk_pll_enable(dev_priv, vco);
+
+ I915_WRITE(CDCLK_CTL, ICL_CDCLK_CD2X_PIPE_NONE |
+ skl_cdclk_decimal(cdclk));
+
+ mutex_lock(&dev_priv->pcu_lock);
+ sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
+ voltage_level);
+ mutex_unlock(&dev_priv->pcu_lock);
+
+ intel_update_cdclk(dev_priv);
+}
+
+static void icl_get_cdclk(struct drm_i915_private *dev_priv,
+ struct intel_cdclk_state *cdclk_state)
+{
+ u32 val;
+
+ val = I915_READ(SKL_DSSM);
+ switch (val & ICL_DSSM_CDCLK_PLL_REFCLK_MASK) {
+ default:
+ MISSING_CASE(val);
+ case ICL_DSSM_CDCLK_PLL_REFCLK_24MHz:
+ cdclk_state->ref = 24000;
+ break;
+ case ICL_DSSM_CDCLK_PLL_REFCLK_19_2MHz:
+ cdclk_state->ref = 19200;
+ break;
+ case ICL_DSSM_CDCLK_PLL_REFCLK_38_4MHz:
+ cdclk_state->ref = 38400;
+ break;
+ }
+
+ val = I915_READ(BXT_DE_PLL_ENABLE);
+ if ((val & BXT_DE_PLL_PLL_ENABLE) == 0 ||
+ (val & BXT_DE_PLL_LOCK) == 0) {
+ /* CDCLK PLL is disabled, the VCO/ratio doesn't matter, but
+ * setting it to zero is a way to signal that. */
+ cdclk_state->vco = 0;
+ cdclk_state->cdclk = 50000;
+ return;
+ }
+
+ cdclk_state->vco = (val & BXT_DE_PLL_RATIO_MASK) * cdclk_state->ref;
+
+ val = I915_READ(CDCLK_CTL);
+ WARN_ON((val & BXT_CDCLK_CD2X_DIV_SEL_MASK) != 0);
+
+ cdclk_state->cdclk = cdclk_state->vco / 2;
+}
+
+/**
+ * icl_init_cdclk - Initialize CDCLK on ICL
+ * @dev_priv: i915 device
+ *
+ * Initialize CDCLK for ICL. This consists mainly of initializing
+ * dev_priv->cdclk.hw and sanitizing the state of the hardware if needed. This
+ * is generally done only during the display core initialization sequence, after
+ * which the DMC will take care of turning CDCLK off/on as needed.
+ */
+void icl_init_cdclk(struct drm_i915_private *dev_priv)
+{
+ struct intel_cdclk_state cdclk_state;
+ u32 val;
+
+ /* This sets dev_priv->cdclk.hw. */
+ intel_update_cdclk(dev_priv);
+
+ cdclk_state = dev_priv->cdclk.hw;
+
+ /* This means CDCLK disabled. */
+ if (cdclk_state.cdclk == 50000)
+ goto sanitize;
+
+ val = I915_READ(CDCLK_CTL);
+
+ if ((val & BXT_CDCLK_CD2X_DIV_SEL_MASK) != 0)
+ goto sanitize;
+
+ if ((val & CDCLK_FREQ_DECIMAL_MASK) !=
+ skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk))
+ goto sanitize;
+
+ return;
+
+sanitize:
+ DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n");
+
+ cdclk_state.ref = dev_priv->cdclk.hw.ref;
+ cdclk_state.cdclk = icl_calc_cdclk(0, cdclk_state.ref);
+ cdclk_state.vco = icl_calc_cdclk_pll_vco(dev_priv, cdclk_state.cdclk);
+
+ icl_set_cdclk(dev_priv, &cdclk_state);
+}
+
+/**
+ * icl_uninit_cdclk - Uninitialize CDCLK on ICL
+ * @dev_priv: i915 device
+ *
+ * Uninitialize CDCLK for ICL. This is done only during the display core
+ * uninitialization sequence.
+ */
+void icl_uninit_cdclk(struct drm_i915_private *dev_priv)
+{
+ struct intel_cdclk_state cdclk_state = dev_priv->cdclk.hw;
+
+ cdclk_state.cdclk = cdclk_state.ref;
+ cdclk_state.vco = 0;
+
+ icl_set_cdclk(dev_priv, &cdclk_state);
+}
+
/**
* cnl_init_cdclk - Initialize CDCLK on CNL
* @dev_priv: i915 device
@@ -2204,6 +2413,36 @@ static int cnl_modeset_calc_cdclk(struct drm_atomic_state *state)
return 0;
}
+static int icl_modeset_calc_cdclk(struct drm_atomic_state *state)
+{
+ struct drm_i915_private *dev_priv = to_i915(state->dev);
+ struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
+ unsigned int ref = intel_state->cdclk.logical.ref;
+ int min_cdclk, cdclk, vco;
+
+ min_cdclk = intel_compute_min_cdclk(state);
+ if (min_cdclk < 0)
+ return min_cdclk;
+
+ cdclk = icl_calc_cdclk(min_cdclk, ref);
+ vco = icl_calc_cdclk_pll_vco(dev_priv, cdclk);
+
+ intel_state->cdclk.logical.vco = vco;
+ intel_state->cdclk.logical.cdclk = cdclk;
+
+ if (!intel_state->active_crtcs) {
+ cdclk = icl_calc_cdclk(0, ref);
+ vco = icl_calc_cdclk_pll_vco(dev_priv, cdclk);
+
+ intel_state->cdclk.actual.vco = vco;
+ intel_state->cdclk.actual.cdclk = cdclk;
+ } else {
+ intel_state->cdclk.actual = intel_state->cdclk.logical;
+ }
+
+ return 0;
+}
+
static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
{
int max_cdclk_freq = dev_priv->max_cdclk_freq;
@@ -2237,7 +2476,12 @@ static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
*/
void intel_update_max_cdclk(struct drm_i915_private *dev_priv)
{
- if (IS_CANNONLAKE(dev_priv)) {
+ if (IS_ICELAKE(dev_priv)) {
+ if (dev_priv->cdclk.hw.ref == 24000)
+ dev_priv->max_cdclk_freq = 648000;
+ else
+ dev_priv->max_cdclk_freq = 652800;
+ } else if (IS_CANNONLAKE(dev_priv)) {
dev_priv->max_cdclk_freq = 528000;
} else if (IS_GEN9_BC(dev_priv)) {
u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
@@ -2461,9 +2705,14 @@ void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv)
dev_priv->display.set_cdclk = cnl_set_cdclk;
dev_priv->display.modeset_calc_cdclk =
cnl_modeset_calc_cdclk;
+ } else if (IS_ICELAKE(dev_priv)) {
+ dev_priv->display.set_cdclk = icl_set_cdclk;
+ dev_priv->display.modeset_calc_cdclk = icl_modeset_calc_cdclk;
}
- if (IS_CANNONLAKE(dev_priv))
+ if (IS_ICELAKE(dev_priv))
+ dev_priv->display.get_cdclk = icl_get_cdclk;
+ else if (IS_CANNONLAKE(dev_priv))
dev_priv->display.get_cdclk = cnl_get_cdclk;
else if (IS_GEN9_BC(dev_priv))
dev_priv->display.get_cdclk = skl_get_cdclk;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 3cee54bc0352..c5d6092aca41 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1403,6 +1403,8 @@ void cnl_init_cdclk(struct drm_i915_private *dev_priv);
void cnl_uninit_cdclk(struct drm_i915_private *dev_priv);
void bxt_init_cdclk(struct drm_i915_private *dev_priv);
void bxt_uninit_cdclk(struct drm_i915_private *dev_priv);
+void icl_init_cdclk(struct drm_i915_private *dev_priv);
+void icl_uninit_cdclk(struct drm_i915_private *dev_priv);
void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv);
void intel_update_max_cdclk(struct drm_i915_private *dev_priv);
void intel_update_cdclk(struct drm_i915_private *dev_priv);
--
2.14.3
More information about the Intel-gfx
mailing list