[Intel-gfx] [PATCH v2 1/2] drm/i915: Add display WA #1175 for planes ending close to right screen edge

[Ville Syrjälä]

On Tue, Jan 16, 2018 at 01:24:14PM +0200, Imre Deak wrote:
> As described in the WA on GLK and CNL planes on the right edge of the
> screen that have less than 4 pixels visible from the beginning of the
> plane to the edge of the screen can cause FIFO underflow and display
> corruption.
> 
> On GLK/CNL I could trigger the problem only if the plane was at the same
> time also aligned to the top edge of the screen (after clipping) and
> there were exactly 2 pixels visible from the start of the plane to the
> right edge of the screen (so couldn't trigger it with 1 or 3 pixels
> visible). Nevertheless, to be sure, I also applied the WA for these cases.
> 
> I also couldn't see any problem with the cursor plane and later Art
> confirmed that it's not affected, so the WA is applied only for the
> other plane types.
> 
> v2:
> - Use -ERANGE instead of -EINVAL. (Chris)
> 
> Signed-off-by: Imre Deak <imre.deak at intel.com>

For both patches
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

> ---
>  drivers/gpu/drm/i915/intel_display.c | 28 ++++++++++++++++++++++++----
>  drivers/gpu/drm/i915/intel_drv.h     |  3 ++-
>  drivers/gpu/drm/i915/intel_sprite.c  |  2 +-
>  3 files changed, 27 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 221e3a183d36..7fe1592bf0df 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2917,14 +2917,19 @@ static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state
>  	return true;
>  }
>  
> -static int skl_check_main_surface(struct intel_plane_state *plane_state)
> +static int skl_check_main_surface(const struct intel_crtc_state *crtc_state,
> +				  struct intel_plane_state *plane_state)
>  {
> +	struct drm_i915_private *dev_priv =
> +		to_i915(plane_state->base.plane->dev);
>  	const struct drm_framebuffer *fb = plane_state->base.fb;
>  	unsigned int rotation = plane_state->base.rotation;
>  	int x = plane_state->base.src.x1 >> 16;
>  	int y = plane_state->base.src.y1 >> 16;
>  	int w = drm_rect_width(&plane_state->base.src) >> 16;
>  	int h = drm_rect_height(&plane_state->base.src) >> 16;
> +	int dst_x = plane_state->base.dst.x1;
> +	int pipe_src_w = crtc_state->pipe_src_w;
>  	int max_width = skl_max_plane_width(fb, 0, rotation);
>  	int max_height = 4096;
>  	u32 alignment, offset, aux_offset = plane_state->aux.offset;
> @@ -2935,6 +2940,20 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
>  		return -EINVAL;
>  	}
>  
> +	/*
> +	 * Display WA #1175: cnl,glk
> +	 * Planes other than the cursor may cause FIFO underflow and display
> +	 * corruption if starting less than 4 pixels from the right edge of
> +	 * the screen.
> +	 */
> +	if ((IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) &&
> +	    dst_x > pipe_src_w - 4) {
> +		DRM_DEBUG_KMS("requested plane X start position %d invalid (valid range %d-%d)\n",
> +			      dst_x,
> +			      0, pipe_src_w - 4);
> +		return -ERANGE;
> +	}
> +
>  	intel_add_fb_offsets(&x, &y, plane_state, 0);
>  	offset = intel_compute_tile_offset(&x, &y, plane_state, 0);
>  	alignment = intel_surf_alignment(fb, 0);
> @@ -3067,7 +3086,8 @@ static int skl_check_ccs_aux_surface(struct intel_plane_state *plane_state)
>  	return 0;
>  }
>  
> -int skl_check_plane_surface(struct intel_plane_state *plane_state)
> +int skl_check_plane_surface(const struct intel_crtc_state *crtc_state,
> +			    struct intel_plane_state *plane_state)
>  {
>  	const struct drm_framebuffer *fb = plane_state->base.fb;
>  	unsigned int rotation = plane_state->base.rotation;
> @@ -3107,7 +3127,7 @@ int skl_check_plane_surface(struct intel_plane_state *plane_state)
>  		plane_state->aux.y = 0;
>  	}
>  
> -	ret = skl_check_main_surface(plane_state);
> +	ret = skl_check_main_surface(crtc_state, plane_state);
>  	if (ret)
>  		return ret;
>  
> @@ -12766,7 +12786,7 @@ intel_check_primary_plane(struct intel_plane *plane,
>  		return 0;
>  
>  	if (INTEL_GEN(dev_priv) >= 9) {
> -		ret = skl_check_plane_surface(state);
> +		ret = skl_check_plane_surface(crtc_state, state);
>  		if (ret)
>  			return ret;
>  
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 5c8e260ca2bc..0f2356d84d0d 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1588,7 +1588,8 @@ u32 skl_plane_ctl(const struct intel_crtc_state *crtc_state,
>  		  const struct intel_plane_state *plane_state);
>  u32 skl_plane_stride(const struct drm_framebuffer *fb, int plane,
>  		     unsigned int rotation);
> -int skl_check_plane_surface(struct intel_plane_state *plane_state);
> +int skl_check_plane_surface(const struct intel_crtc_state *crtc_state,
> +			    struct intel_plane_state *plane_state);
>  int i9xx_check_plane_surface(struct intel_plane_state *plane_state);
>  
>  /* intel_csr.c */
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> index dd485f59eb1d..b8b617ba0c0c 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -1027,7 +1027,7 @@ intel_check_sprite_plane(struct intel_plane *plane,
>  	dst->y2 = crtc_y + crtc_h;
>  
>  	if (INTEL_GEN(dev_priv) >= 9) {
> -		ret = skl_check_plane_surface(state);
> +		ret = skl_check_plane_surface(crtc_state, state);
>  		if (ret)
>  			return ret;
>  
> -- 
> 2.13.2
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC