[Intel-gfx] [PATCH v4 1/7] drm/i915: Add CRTC output format YCBCR 4:2:0

Sharma, Shashank shashank.sharma at intel.com
Tue Jan 30 17:04:15 UTC 2018


Regards

Shashank


On 1/30/2018 3:53 PM, Jani Nikula wrote:
> On Tue, 30 Jan 2018, Shashank Sharma <shashank.sharma at intel.com> wrote:
>> From: "Sharma, Shashank" <shashank.sharma at intel.com>
>>
>> Currently, we are using a bool in CRTC state (state->ycbcr420),
>> to indicate modeset, that the output format is YCBCR 4:2:0. Now in
>> order to support other YCBCR formats, we will need more such flags.
>>
>> The idea behind this patch is to replace this bool with an enum,
>> and plug this in in the existing YCBCR 4:2:0 framework in such a
>> way that this can be re-used for YCBCR 4:4:4 and other output formats too.
>>
>> This patch adds a new enum for CRTC output formats, and then plugs it
>> in the existing modeset framework.
>>
>> V3: Added this patch in the series, to address review comments from
>>      second patchset.
>> V4: Added r-b from Maarten (on v3)
>>      Addressed review comments from Ville:
>> 	- Change the enum name to intel_output_format from crtc_output_format.
>> 	- Start the enum value (INVALID) from 0 instaed of 1.
>>          - Set the crtc's output_format to RGB in encoder's compute_config.
>>
>> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
>> Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
>> Signed-off-by: Shashank Sharma <shashank.sharma at intel.com>
>> Reviewed-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
>> ---
>>   drivers/gpu/drm/i915/intel_color.c   |  2 +-
>>   drivers/gpu/drm/i915/intel_ddi.c     |  4 ++-
>>   drivers/gpu/drm/i915/intel_display.c | 66 ++++++++++++++++++++++++------------
>>   drivers/gpu/drm/i915/intel_drv.h     | 10 ++++--
>>   drivers/gpu/drm/i915/intel_hdmi.c    |  6 ++--
>>   drivers/gpu/drm/i915/intel_panel.c   |  2 +-
>>   6 files changed, 61 insertions(+), 29 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
>> index aa66e95..99e32cb 100644
>> --- a/drivers/gpu/drm/i915/intel_color.c
>> +++ b/drivers/gpu/drm/i915/intel_color.c
>> @@ -141,7 +141,7 @@ static void i9xx_load_csc_matrix(struct drm_crtc_state *crtc_state)
>>   	uint16_t coeffs[9] = { 0, };
>>   	struct intel_crtc_state *intel_crtc_state = to_intel_crtc_state(crtc_state);
>>   
>> -	if (intel_crtc_state->ycbcr420) {
>> +	if (intel_crtc_state->output_format == CRTC_OUTPUT_YCBCR420) {
>>   		i9xx_load_ycbcr_conversion_matrix(intel_crtc);
>>   		return;
>>   	} else if (crtc_state->ctm) {
>> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
>> index e51559b..d565e28 100644
>> --- a/drivers/gpu/drm/i915/intel_ddi.c
>> +++ b/drivers/gpu/drm/i915/intel_ddi.c
>> @@ -1264,7 +1264,7 @@ static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)
>>   	else
>>   		dotclock = pipe_config->port_clock;
>>   
>> -	if (pipe_config->ycbcr420)
>> +	if (pipe_config->output_format == CRTC_OUTPUT_YCBCR420)
>>   		dotclock *= 2;
>>   
>>   	if (pipe_config->pixel_multiplier)
>> @@ -2759,6 +2759,8 @@ static bool intel_ddi_compute_config(struct intel_encoder *encoder,
>>   	if (port == PORT_A)
>>   		pipe_config->cpu_transcoder = TRANSCODER_EDP;
>>   
>> +	pipe_config->output_format = CRTC_OUTPUT_RGB;
>> +
>>   	if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI))
>>   		ret = intel_hdmi_compute_config(encoder, pipe_config, conn_state);
>>   	else
>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> index 83de43c..877336d 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -4650,7 +4650,8 @@ skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
>>   	 */
>>   	need_scaling = src_w != dst_w || src_h != dst_h;
>>   
>> -	if (crtc_state->ycbcr420 && scaler_user == SKL_CRTC_INDEX)
>> +	if (crtc_state->output_format == CRTC_OUTPUT_YCBCR420 &&
>> +	    scaler_user == SKL_CRTC_INDEX)
>>   		need_scaling = true;
>>   
>>   	/*
>> @@ -6362,7 +6363,8 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
>>   		return -EINVAL;
>>   	}
>>   
>> -	if (pipe_config->ycbcr420 && pipe_config->base.ctm) {
>> +	if (pipe_config->output_format == CRTC_OUTPUT_YCBCR420 &&
>> +	    pipe_config->base.ctm) {
>>   		/*
>>   		 * There is only one pipe CSC unit per pipe, and we need that
>>   		 * for output conversion from RGB->YCBCR. So if CTM is already
>> @@ -8192,10 +8194,10 @@ static void haswell_set_pipemisc(struct drm_crtc *crtc)
>>   		if (intel_crtc->config->dither)
>>   			val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
>>   
>> -		if (config->ycbcr420) {
>> -			val |= PIPEMISC_OUTPUT_COLORSPACE_YUV |
>> -				PIPEMISC_YUV420_ENABLE |
>> -				PIPEMISC_YUV420_MODE_FULL_BLEND;
>> +		if (config->output_format == CRTC_OUTPUT_YCBCR420) {
>> +			val |= PIPEMISC_OUTPUT_COLORSPACE_YUV;
>> +			val |= PIPEMISC_YUV420_ENABLE |
>> +			       PIPEMISC_YUV420_MODE_FULL_BLEND;
>>   		}
>>   
>>   		I915_WRITE(PIPEMISC(intel_crtc->pipe), val);
>> @@ -9171,6 +9173,19 @@ static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
>>   	}
>>   }
>>   
>> +static const char * const output_format_str[] = {
>> +	"Invalid",
>> +	"RGB",
>> +	"YCBCR4:2:0",
> This should really be:
>
> 	[CRTC_OUTPUT_INVALID] = "Invalid",
> 	[CRTC_OUTPUT_RGB] = "RGB",
> 	[CRTC_OUTPUT_YCBCR420] = "YCBCR4:2:0",
Hey sure, thanks. Just after the comment I realized that now when have 
started the enum from 0 (instead of -1) I can do this.
- Shashank
>
> BR,
> Jani.
>
>> +};
>> +
>> +static const char *output_formats(enum intel_output_format format)
>> +{
>> +	if (format < CRTC_OUTPUT_INVALID || format > CRTC_OUTPUT_YCBCR420)
>> +		format = CRTC_OUTPUT_INVALID;
>> +	return output_format_str[format];
>> +}
>> +
>>   static bool haswell_get_pipe_config(struct intel_crtc *crtc,
>>   				    struct intel_crtc_state *pipe_config)
>>   {
>> @@ -9211,19 +9226,28 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
>>   
>>   	if (IS_BROADWELL(dev_priv) || INTEL_GEN(dev_priv) >= 9) {
>>   		u32 tmp = I915_READ(PIPEMISC(crtc->pipe));
>> -		bool clrspace_yuv = tmp & PIPEMISC_OUTPUT_COLORSPACE_YUV;
>> -
>> -		if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10) {
>> -			bool blend_mode_420 = tmp &
>> -					      PIPEMISC_YUV420_MODE_FULL_BLEND;
>> +		enum intel_output_format output_format = CRTC_OUTPUT_RGB;
>> +
>> +		if (tmp & PIPEMISC_OUTPUT_COLORSPACE_YUV) {
>> +			bool ycbcr420_enabled = tmp & PIPEMISC_YUV420_ENABLE;
>> +			bool blend = tmp & PIPEMISC_YUV420_MODE_FULL_BLEND;
>> +
>> +			if (ycbcr420_enabled) {
>> +				/* We support 4:2:0 in full blend mode only */
>> +				if (!blend)
>> +					output_format = CRTC_OUTPUT_INVALID;
>> +				else if (!(IS_GEMINILAKE(dev_priv) ||
>> +					   INTEL_GEN(dev_priv) >= 10))
>> +					output_format = CRTC_OUTPUT_INVALID;
>> +				else
>> +					output_format = CRTC_OUTPUT_YCBCR420;
>> +			}
>>   
>> -			pipe_config->ycbcr420 = tmp & PIPEMISC_YUV420_ENABLE;
>> -			if (pipe_config->ycbcr420 != clrspace_yuv ||
>> -			    pipe_config->ycbcr420 != blend_mode_420)
>> -				DRM_DEBUG_KMS("Bad 4:2:0 mode (%08x)\n", tmp);
>> -		} else if (clrspace_yuv) {
>> -			DRM_DEBUG_KMS("YCbCr 4:2:0 Unsupported\n");
>>   		}
>> +
>> +		pipe_config->output_format = output_format;
>> +		DRM_DEBUG_KMS("Output format %s\n",
>> +				output_formats(output_format));
>>   	}
>>   
>>   	power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
>> @@ -10578,6 +10602,9 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
>>   	DRM_DEBUG_KMS("output_types: %s (0x%x)\n",
>>   		      buf, pipe_config->output_types);
>>   
>> +	DRM_DEBUG_KMS("output format: %s\n",
>> +		output_formats(pipe_config->output_format));
>> +
>>   	DRM_DEBUG_KMS("cpu_transcoder: %s, pipe bpp: %i, dithering: %i\n",
>>   		      transcoder_name(pipe_config->cpu_transcoder),
>>   		      pipe_config->pipe_bpp, pipe_config->dither);
>> @@ -10587,9 +10614,6 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
>>   				      pipe_config->fdi_lanes,
>>   				      &pipe_config->fdi_m_n);
>>   
>> -	if (pipe_config->ycbcr420)
>> -		DRM_DEBUG_KMS("YCbCr 4:2:0 output enabled\n");
>> -
>>   	if (intel_crtc_has_dp_encoder(pipe_config)) {
>>   		intel_dump_m_n_config(pipe_config, "dp m_n",
>>   				pipe_config->lane_count, &pipe_config->dp_m_n);
>> @@ -11163,6 +11187,7 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv,
>>   	PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_end);
>>   
>>   	PIPE_CONF_CHECK_I(pixel_multiplier);
>> +	PIPE_CONF_CHECK_I(output_format);
>>   	PIPE_CONF_CHECK_BOOL(has_hdmi_sink);
>>   	if ((INTEL_GEN(dev_priv) < 8 && !IS_HASWELL(dev_priv)) ||
>>   	    IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
>> @@ -11171,7 +11196,6 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv,
>>   	PIPE_CONF_CHECK_BOOL(hdmi_scrambling);
>>   	PIPE_CONF_CHECK_BOOL(hdmi_high_tmds_clock_ratio);
>>   	PIPE_CONF_CHECK_BOOL_INCOMPLETE(has_infoframe);
>> -	PIPE_CONF_CHECK_BOOL(ycbcr420);
>>   
>>   	PIPE_CONF_CHECK_BOOL_INCOMPLETE(has_audio);
>>   
>> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
>> index 3cee54b..35be78e 100644
>> --- a/drivers/gpu/drm/i915/intel_drv.h
>> +++ b/drivers/gpu/drm/i915/intel_drv.h
>> @@ -687,6 +687,12 @@ struct intel_crtc_wm_state {
>>   	bool need_postvbl_update;
>>   };
>>   
>> +enum intel_output_format {
>> +	CRTC_OUTPUT_INVALID,
>> +	CRTC_OUTPUT_RGB,
>> +	CRTC_OUTPUT_YCBCR420,
>> +};
>> +
>>   struct intel_crtc_state {
>>   	struct drm_crtc_state base;
>>   
>> @@ -873,8 +879,8 @@ struct intel_crtc_state {
>>   	/* HDMI High TMDS char rate ratio */
>>   	bool hdmi_high_tmds_clock_ratio;
>>   
>> -	/* output format is YCBCR 4:2:0 */
>> -	bool ycbcr420;
>> +	/* Output format RGB/YCBCR etc */
>> +	enum intel_output_format output_format;
>>   };
>>   
>>   struct intel_crtc {
>> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
>> index 978f22b..6700ed6 100644
>> --- a/drivers/gpu/drm/i915/intel_hdmi.c
>> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
>> @@ -479,7 +479,7 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
>>   		return;
>>   	}
>>   
>> -	if (crtc_state->ycbcr420)
>> +	if (crtc_state->output_format == CRTC_OUTPUT_YCBCR420)
>>   		frame.avi.colorspace = HDMI_COLORSPACE_YUV420;
>>   	else
>>   		frame.avi.colorspace = HDMI_COLORSPACE_RGB;
>> @@ -1615,7 +1615,7 @@ static bool hdmi_12bpc_possible(const struct intel_crtc_state *crtc_state)
>>   		if (connector_state->crtc != crtc_state->base.crtc)
>>   			continue;
>>   
>> -		if (crtc_state->ycbcr420) {
>> +		if (crtc_state->output_format == CRTC_OUTPUT_YCBCR420) {
>>   			const struct drm_hdmi_info *hdmi = &info->hdmi;
>>   
>>   			if (!(hdmi->y420_dc_modes & DRM_EDID_YCBCR420_DC_36))
>> @@ -1650,7 +1650,7 @@ intel_hdmi_ycbcr420_config(struct drm_connector *connector,
>>   	config->port_clock /= 2;
>>   	*clock_12bpc /= 2;
>>   	*clock_8bpc /= 2;
>> -	config->ycbcr420 = true;
>> +	config->output_format = CRTC_OUTPUT_YCBCR420;
>>   
>>   	/* YCBCR 420 output conversion needs a scaler */
>>   	if (skl_update_scaler_crtc(config)) {
>> diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
>> index e702a64..17025bc 100644
>> --- a/drivers/gpu/drm/i915/intel_panel.c
>> +++ b/drivers/gpu/drm/i915/intel_panel.c
>> @@ -111,7 +111,7 @@ intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
>>   	/* Native modes don't need fitting */
>>   	if (adjusted_mode->crtc_hdisplay == pipe_config->pipe_src_w &&
>>   	    adjusted_mode->crtc_vdisplay == pipe_config->pipe_src_h &&
>> -	    !pipe_config->ycbcr420)
>> +	    pipe_config->output_format != CRTC_OUTPUT_YCBCR420)
>>   		goto done;
>>   
>>   	switch (fitting_mode) {



More information about the Intel-gfx mailing list