[Intel-gfx] [PATCH v3 01/20] drm/i915/icl: Define register for DSI PLL

[Madhav Chauhan]

This patch adds the new registers and corresponding bit definitions
which will be used for programming/enable DSI PLL.

v2: Review comments from Jani N
    - Fix spaces while defining ICL_ESC_CLK_DIV_MASK
    - Define shift and mask for bitfields.

Signed-off-by: Madhav Chauhan <madhav.chauhan at intel.com>
Reviewed-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c30cfcd..d414940 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9522,6 +9522,21 @@ enum skl_power_gate {
 #define MIPIO_TXESC_CLK_DIV2			_MMIO(0x160008)
 #define  GLK_TX_ESC_CLK_DIV2_MASK			0x3FF
 
+#define _ICL_DSI_ESC_CLK_DIV0		0x6b090
+#define _ICL_DSI_ESC_CLK_DIV1		0x6b890
+#define ICL_DSI_ESC_CLK_DIV(port)	_MMIO_PORT((port),	\
+							_ICL_DSI_ESC_CLK_DIV0, \
+							_ICL_DSI_ESC_CLK_DIV1)
+#define _ICL_DPHY_ESC_CLK_DIV0		0x162190
+#define _ICL_DPHY_ESC_CLK_DIV1		0x6C190
+#define ICL_DPHY_ESC_CLK_DIV(port)	_MMIO_PORT((port),	\
+						_ICL_DPHY_ESC_CLK_DIV0, \
+						_ICL_DPHY_ESC_CLK_DIV1)
+#define  ICL_BYTE_CLK_PER_ESC_CLK_MASK		(0x1f << 16)
+#define  ICL_BYTE_CLK_PER_ESC_CLK_SHIFT	16
+#define  ICL_ESC_CLK_DIV_MASK			0x1ff
+#define  ICL_ESC_CLK_DIV_SHIFT			0
+
 /* Gen4+ Timestamp and Pipe Frame time stamp registers */
 #define GEN4_TIMESTAMP		_MMIO(0x2358)
 #define ILK_TIMESTAMP_HI	_MMIO(0x70070)
-- 
2.7.4