[Intel-gfx] [PATCH v3 05/20] drm/i915/icl: Define PORT_CL_DW_10 register

[Madhav Chauhan]

This register used to power down individual lanes for
DDI/DSI ports. Bitfields to power up/down various
combinations of lanes are also added in this patch.

v2: Review comments from Jani N
    - Use override instead of "override" for bitfields
    - Define mask for override bitfield
    - Define PWR_DOWN_LN* macros shifted in place
v3: Correct PWR_DOWN_LN_MASK value (Jani N)

Signed-off-by: Madhav Chauhan <madhav.chauhan at intel.com>
Reviewed-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index dfd603c..cd00350 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1704,6 +1704,26 @@ enum i915_power_well_id {
 #define ICL_PORT_CL_DW5(port)	_MMIO_PORT(port, _ICL_PORT_CL_DW5_A, \
 						 _ICL_PORT_CL_DW5_B)
 
+#define _CNL_PORT_CL_DW10_A		0x162028
+#define _ICL_PORT_CL_DW10_B		0x6c028
+#define ICL_PORT_CL_DW10(port)		_MMIO_PORT(port,	\
+						   _CNL_PORT_CL_DW10_A, \
+						   _ICL_PORT_CL_DW10_B)
+#define  PG_SEQ_DELAY_OVERRIDE_MASK	(3 << 25)
+#define  PG_SEQ_DELAY_OVERRIDE_SHIFT	25
+#define  PG_SEQ_DELAY_OVERRIDE_ENABLE	(1 << 24)
+#define  PWR_UP_ALL_LANES		(0x0 << 4)
+#define  PWR_DOWN_LN_3_2_1		(0xe << 4)
+#define  PWR_DOWN_LN_3_2		(0xc << 4)
+#define  PWR_DOWN_LN_3			(0x8 << 4)
+#define  PWR_DOWN_LN_2_1_0		(0x7 << 4)
+#define  PWR_DOWN_LN_1_0		(0x3 << 4)
+#define  PWR_DOWN_LN_1			(0x2 << 4)
+#define  PWR_DOWN_LN_3_1		(0xa << 4)
+#define  PWR_DOWN_LN_3_1_0		(0xb << 4)
+#define  PWR_DOWN_LN_MASK		(0xf << 4)
+#define  PWR_DOWN_LN_SHIFT		4
+
 #define _PORT_CL1CM_DW9_A		0x162024
 #define _PORT_CL1CM_DW9_BC		0x6C024
 #define   IREF0RC_OFFSET_SHIFT		8
-- 
2.7.4