[Intel-gfx] [PATCH v2 1/2] drm/i915/icl: Add remaining registers and bitfields for MG PHY DDI
Paulo Zanoni
paulo.r.zanoni at intel.com
Fri Jul 13 00:00:42 UTC 2018
Em Qui, 2018-06-28 às 15:35 -0700, Manasi Navare escreveu:
> This patch adds the remaining register definitions and bit fields
> required for MG PHy DDI buffer initializations and voltage
> swing programming for MG PHy DDI ports.
>
> While at it this patch also fixes the naming for previously defined
> MG PHY registers in original commit id (c92f47b5ec977a "drm/i915/icl:
> Add register defs for voltage swing sequences for MG PHY DDI").
> Since the MG PHY registers are first defined in ICL platform, there
> is no need for _ICL prefix.
IMHO drive-by "do this other trivial thing"s are fine when it's only 1
or 2 small chunks affected. In this case it's half of the patch, so I
would prefer having it in a separate patch. But let's leave it as-is
here since at least the registers being touched are not used.
More below.
>
> v2:
> * Change the MG_TX_DRVCTL registers names to match the spec (Anusha)
>
> Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> Cc: James Ausmus <james.ausmus at intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 246 +++++++++++++++++++++++-------
> ----------
> 1 file changed, 145 insertions(+), 101 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h
> b/drivers/gpu/drm/i915/i915_reg.h
> index c30cfcd..6119acc 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -1872,121 +1872,165 @@ enum i915_power_well_id {
> #define N_SCALAR(x) ((x) << 24)
> #define N_SCALAR_MASK (0x7F << 24)
>
> -#define _ICL_MG_PHY_PORT_LN(port, ln, ln0p1, ln0p2, ln1p1) \
> +#define MG_PHY_PORT_LN(port, ln, ln0p1, ln0p2, ln1p1) \
> _MMIO(_PORT((port) - PORT_C, ln0p1, ln0p2) + (ln) * ((ln1p1)
> - (ln0p1)))
>
> -#define _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT1 0x16812C
> -#define _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT1 0x16852C
> -#define _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT2 0x16912C
> -#define _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT2 0x16952C
> -#define _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT3 0x16A12C
> -#define _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT3 0x16A52C
> -#define _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT4 0x16B12C
> -#define _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT4 0x16B52C
> -#define ICL_PORT_MG_TX1_LINK_PARAMS(port, ln) \
> - _ICL_MG_PHY_PORT_LN(port, ln,
> _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT1, \
> - _ICL_MG_TX_LINK_PARAMS_TX1LN0_
> PORT2, \
> - _ICL_MG_TX_LINK_PARAMS_TX1LN1_
> PORT1)
> -
> -#define _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT1 0x1680AC
> -#define _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT1 0x1684AC
> -#define _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT2 0x1690AC
> -#define _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT2 0x1694AC
> -#define _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT3 0x16A0AC
> -#define _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT3 0x16A4AC
> -#define _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT4 0x16B0AC
> -#define _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT4 0x16B4AC
> -#define ICL_PORT_MG_TX2_LINK_PARAMS(port, ln) \
> - _ICL_MG_PHY_PORT_LN(port, ln,
> _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT1, \
> - _ICL_MG_TX_LINK_PARAMS_TX2LN0_
> PORT2, \
> - _ICL_MG_TX_LINK_PARAMS_TX2LN1_
> PORT1)
> +#define MG_TX_LINK_PARAMS_TX1LN0_PORT1 0x16812C
> +#define MG_TX_LINK_PARAMS_TX1LN1_PORT1 0x16852C
> +#define MG_TX_LINK_PARAMS_TX1LN0_PORT2 0x16912C
> +#define MG_TX_LINK_PARAMS_TX1LN1_PORT2 0x16952C
> +#define MG_TX_LINK_PARAMS_TX1LN0_PORT3 0x16A12C
> +#define MG_TX_LINK_PARAMS_TX1LN1_PORT3 0x16A52C
> +#define MG_TX_LINK_PARAMS_TX1LN0_PORT4 0x16B12C
> +#define _MG_TX_LINK_PARAMS_TX1LN1_PORT4 0x16B52C
You left an underline on the line above.
> +#define MG_TX1_LINK_PARAMS(port, ln) \
> + MG_PHY_PORT_LN(port, ln, MG_TX_LINK_PARAMS_TX1LN0_PORT1, \
> + MG_TX_LINK_PARAMS_TX1LN0_PORT2, \
> + MG_TX_LINK_PARAMS_TX1LN1_PORT1)
> +
> +#define MG_TX_LINK_PARAMS_TX2LN0_PORT1 0x1680AC
> +#define MG_TX_LINK_PARAMS_TX2LN1_PORT1 0x1684AC
> +#define MG_TX_LINK_PARAMS_TX2LN0_PORT2 0x1690AC
> +#define MG_TX_LINK_PARAMS_TX2LN1_PORT2 0x1694AC
> +#define MG_TX_LINK_PARAMS_TX2LN0_PORT3 0x16A0AC
> +#define MG_TX_LINK_PARAMS_TX2LN1_PORT3 0x16A4AC
> +#define MG_TX_LINK_PARAMS_TX2LN0_PORT4 0x16B0AC
> +#define MG_TX_LINK_PARAMS_TX2LN1_PORT4 0x16B4AC
> +#define MG_TX2_LINK_PARAMS(port, ln) \
> + MG_PHY_PORT_LN(port, ln, MG_TX_LINK_PARAMS_TX2LN0_PORT1, \
> + MG_TX_LINK_PARAMS_TX2LN0_PORT2, \
> + MG_TX_LINK_PARAMS_TX2LN1_PORT1)
> #define CRI_USE_FS32 (1 << 5)
>
> -#define _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT1 0x16814
> C
> -#define _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT1 0x16854
> C
> -#define _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT2 0x16914
> C
> -#define _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT2 0x16954
> C
> -#define _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT3 0x16A14
> C
> -#define _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT3 0x16A54
> C
> -#define _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT4 0x16B14
> C
> -#define _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT4 0x16B54
> C
> -#define ICL_PORT_MG_TX1_PISO_READLOAD(port, ln) \
> - _ICL_MG_PHY_PORT_LN(port, ln,
> _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT1, \
> - _ICL_MG_TX_PISO_READLOAD_TX1LN
> 0_PORT2, \
> - _ICL_MG_TX_PISO_READLOAD_TX1LN
> 1_PORT1)
> -
> -#define _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT1 0x1680C
> C
> -#define _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT1 0x1684C
> C
> -#define _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT2 0x1690C
> C
> -#define _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT2 0x1694C
> C
> -#define _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT3 0x16A0C
> C
> -#define _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT3 0x16A4C
> C
> -#define _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT4 0x16B0C
> C
> -#define _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT4 0x16B4C
> C
> -#define ICL_PORT_MG_TX2_PISO_READLOAD(port, ln) \
> - _ICL_MG_PHY_PORT_LN(port, ln,
> _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT1, \
> - _ICL_MG_TX_PISO_READLOAD_TX2LN
> 0_PORT2, \
> - _ICL_MG_TX_PISO_READLOAD_TX2LN
> 1_PORT1)
> +#define MG_TX_PISO_READLOAD_TX1LN0_PORT1 0x16814C
> +#define MG_TX_PISO_READLOAD_TX1LN1_PORT1 0x16854C
> +#define MG_TX_PISO_READLOAD_TX1LN0_PORT2 0x16914C
> +#define MG_TX_PISO_READLOAD_TX1LN1_PORT2 0x16954C
> +#define MG_TX_PISO_READLOAD_TX1LN0_PORT3 0x16A14C
> +#define MG_TX_PISO_READLOAD_TX1LN1_PORT3 0x16A54C
> +#define MG_TX_PISO_READLOAD_TX1LN0_PORT4 0x16B14C
> +#define MG_TX_PISO_READLOAD_TX1LN1_PORT4 0x16B54C
> +#define MG_TX1_PISO_READLOAD(port, ln) \
> + MG_PHY_PORT_LN(port, ln, MG_TX_PISO_READLOAD_TX1LN0_PORT1, \
> + MG_TX_PISO_READLOAD_TX1LN0_PORT2, \
> + MG_TX_PISO_READLOAD_TX1LN1_PORT1)
> +
> +#define MG_TX_PISO_READLOAD_TX2LN0_PORT1 0x1680CC
> +#define MG_TX_PISO_READLOAD_TX2LN1_PORT1 0x1684CC
> +#define MG_TX_PISO_READLOAD_TX2LN0_PORT2 0x1690CC
> +#define MG_TX_PISO_READLOAD_TX2LN1_PORT2 0x1694CC
> +#define MG_TX_PISO_READLOAD_TX2LN0_PORT3 0x16A0CC
> +#define MG_TX_PISO_READLOAD_TX2LN1_PORT3 0x16A4CC
> +#define MG_TX_PISO_READLOAD_TX2LN0_PORT4 0x16B0CC
> +#define MG_TX_PISO_READLOAD_TX2LN1_PORT4 0x16B4CC
> +#define MG_TX2_PISO_READLOAD(port, ln) \
> + MG_PHY_PORT_LN(port, ln, MG_TX_PISO_READLOAD_TX2LN0_PORT1, \
> + MG_TX_PISO_READLOAD_TX2LN0_PORT2, \
> + MG_TX_PISO_READLOAD_TX2LN1_PORT1)
> #define CRI_CALCINIT (1 << 1)
>
> -#define _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT1 0x168148
> -#define _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT1 0x168548
> -#define _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT2 0x169148
> -#define _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT2 0x169548
> -#define _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT3 0x16A148
> -#define _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT3 0x16A548
> -#define _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT4 0x16B148
> -#define _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT4 0x16B548
> -#define ICL_PORT_MG_TX1_SWINGCTRL(port, ln) \
> - _ICL_MG_PHY_PORT_LN(port, ln,
> _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT1, \
> - _ICL_MG_TX_SWINGCTRL_TX1LN0_PO
> RT2, \
> - _ICL_MG_TX_SWINGCTRL_TX1LN1_PO
> RT1)
> -
> -#define _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT1 0x1680C8
> -#define _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT1 0x1684C8
> -#define _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT2 0x1690C8
> -#define _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT2 0x1694C8
> -#define _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT3 0x16A0C8
> -#define _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT3 0x16A4C8
> -#define _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT4 0x16B0C8
> -#define _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT4 0x16B4C8
> -#define ICL_PORT_MG_TX2_SWINGCTRL(port, ln) \
> - _ICL_MG_PHY_PORT_LN(port, ln,
> _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT1, \
> - _ICL_MG_TX_SWINGCTRL_TX2LN0_PO
> RT2, \
> - _ICL_MG_TX_SWINGCTRL_TX2LN1_PO
> RT1)
> +#define MG_TX_SWINGCTRL_TX1LN0_PORT1 0x168148
> +#define MG_TX_SWINGCTRL_TX1LN1_PORT1 0x168548
> +#define MG_TX_SWINGCTRL_TX1LN0_PORT2 0x169148
> +#define MG_TX_SWINGCTRL_TX1LN1_PORT2 0x169548
> +#define MG_TX_SWINGCTRL_TX1LN0_PORT3 0x16A148
> +#define MG_TX_SWINGCTRL_TX1LN1_PORT3 0x16A548
> +#define MG_TX_SWINGCTRL_TX1LN0_PORT4 0x16B148
> +#define MG_TX_SWINGCTRL_TX1LN1_PORT4 0x16B548
> +#define MG_TX1_SWINGCTRL(port, ln) \
> + MG_PHY_PORT_LN(port, ln, MG_TX_SWINGCTRL_TX1LN0_PORT1, \
> + MG_TX_SWINGCTRL_TX1LN0_PORT2, \
> + MG_TX_SWINGCTRL_TX1LN1_PORT1)
> +
> +#define MG_TX_SWINGCTRL_TX2LN0_PORT1 0x1680C8
> +#define MG_TX_SWINGCTRL_TX2LN1_PORT1 0x1684C8
> +#define MG_TX_SWINGCTRL_TX2LN0_PORT2 0x1690C8
> +#define MG_TX_SWINGCTRL_TX2LN1_PORT2 0x1694C8
> +#define MG_TX_SWINGCTRL_TX2LN0_PORT3 0x16A0C8
> +#define MG_TX_SWINGCTRL_TX2LN1_PORT3 0x16A4C8
> +#define MG_TX_SWINGCTRL_TX2LN0_PORT4 0x16B0C8
> +#define MG_TX_SWINGCTRL_TX2LN1_PORT4 0x16B4C8
> +#define MG_TX2_SWINGCTRL(port, ln) \
> + MG_PHY_PORT_LN(port, ln, MG_TX_SWINGCTRL_TX2LN0_PORT1, \
> + MG_TX_SWINGCTRL_TX2LN0_PORT2, \
> + MG_TX_SWINGCTRL_TX2LN1_PORT1)
> #define CRI_TXDEEMPH_OVERRIDE_17_12(x) ((x)
> << 0)
> #define CRI_TXDEEMPH_OVERRIDE_17_12_MASK (0x3F << 0)
>
> -#define _ICL_MG_TX_DRVCTRL_TX1LN0_PORT1 0x168
> 144
> -#define _ICL_MG_TX_DRVCTRL_TX1LN1_PORT1 0x168
> 544
> -#define _ICL_MG_TX_DRVCTRL_TX1LN0_PORT2 0x169
> 144
> -#define _ICL_MG_TX_DRVCTRL_TX1LN1_PORT2 0x169
> 544
> -#define _ICL_MG_TX_DRVCTRL_TX1LN0_PORT3 0x16A
> 144
> -#define _ICL_MG_TX_DRVCTRL_TX1LN1_PORT3 0x16A
> 544
> -#define _ICL_MG_TX_DRVCTRL_TX1LN0_PORT4 0x16B
> 144
> -#define _ICL_MG_TX_DRVCTRL_TX1LN1_PORT4 0x16B
> 544
> -#define ICL_PORT_MG_TX1_DRVCTRL(port, ln) \
> - _ICL_MG_PHY_PORT_LN(port, ln,
> _ICL_MG_TX_DRVCTRL_TX1LN0_PORT1, \
> - _ICL_MG_TX_DRVCTRL_TX1LN0_PORT
> 2, \
> - _ICL_MG_TX_DRVCTRL_TX1LN1_PORT
> 1)
> -
> -#define _ICL_MG_TX_DRVCTRL_TX2LN0_PORT1 0x168
> 0C4
> -#define _ICL_MG_TX_DRVCTRL_TX2LN1_PORT1 0x168
> 4C4
> -#define _ICL_MG_TX_DRVCTRL_TX2LN0_PORT2 0x169
> 0C4
> -#define _ICL_MG_TX_DRVCTRL_TX2LN1_PORT2 0x169
> 4C4
> -#define _ICL_MG_TX_DRVCTRL_TX2LN0_PORT3 0x16A
> 0C4
> -#define _ICL_MG_TX_DRVCTRL_TX2LN1_PORT3 0x16A
> 4C4
> -#define _ICL_MG_TX_DRVCTRL_TX2LN0_PORT4 0x16B
> 0C4
> -#define _ICL_MG_TX_DRVCTRL_TX2LN1_PORT4 0x16B
> 4C4
> -#define ICL_PORT_MG_TX2_DRVCTRL(port, ln) \
> - _ICL_MG_PHY_PORT_LN(port, ln,
> _ICL_MG_TX_DRVCTRL_TX2LN0_PORT1, \
> - _ICL_MG_TX_DRVCTRL_TX2LN0_PORT
> 2, \
> - _ICL_MG_TX_DRVCTRL_TX2LN1_PORT
> 1)
> +#define MG_TX_DRVCTRL_TX1LN0_TXPORT1 0x168144
> +#define MG_TX_DRVCTRL_TX1LN1_TXPORT1 0x168544
> +#define MG_TX_DRVCTRL_TX1LN0_TXPORT2 0x169144
> +#define MG_TX_DRVCTRL_TX1LN1_TXPORT2 0x169544
> +#define MG_TX_DRVCTRL_TX1LN0_TXPORT3 0x16A144
> +#define MG_TX_DRVCTRL_TX1LN1_TXPORT3 0x16A544
> +#define MG_TX_DRVCTRL_TX1LN0_TXPORT4 0x16B144
> +#define MG_TX_DRVCTRL_TX1LN1_TXPORT4 0x16B544
> +#define MG_TX1_DRVCTRL(port, ln) \
> + MG_PHY_PORT_LN(port, ln, MG_TX_DRVCTRL_TX1LN0_TXPORT1, \
> + MG_TX_DRVCTRL_TX1LN0_TXPORT2, \
> + MG_TX_DRVCTRL_TX1LN1_TXPORT1)
> +
> +#define MG_TX_DRVCTRL_TX2LN0_PORT1 0x1680C4
> +#define MG_TX_DRVCTRL_TX2LN1_PORT1 0x1684C4
> +#define MG_TX_DRVCTRL_TX2LN0_PORT2 0x1690C4
> +#define MG_TX_DRVCTRL_TX2LN1_PORT2 0x1694C4
> +#define MG_TX_DRVCTRL_TX2LN0_PORT3 0x16A0C4
> +#define MG_TX_DRVCTRL_TX2LN1_PORT3 0x16A4C4
> +#define MG_TX_DRVCTRL_TX2LN0_PORT4 0x16B0C4
> +#define MG_TX_DRVCTRL_TX2LN1_PORT4 0x16B4C4
> +#define MG_TX2_DRVCTRL(port, ln) \
> + MG_PHY_PORT_LN(port, ln, MG_TX_DRVCTRL_TX2LN0_PORT1, \
> + MG_TX_DRVCTRL_TX2LN0_PORT2, \
> + MG_TX_DRVCTRL_TX2LN1_PORT1)
> #define CRI_TXDEEMPH_OVERRIDE_11_6(x) ((x) <<
> 24)
> #define CRI_TXDEEMPH_OVERRIDE_11_6_MASK (0x3F
> << 24)
> #define CRI_TXDEEMPH_OVERRIDE_EN (1 << 22)
> #define CRI_TXDEEMPH_OVERRIDE_5_0(x) ((x) <<
> 16)
> #define CRI_TXDEEMPH_OVERRIDE_5_0_MASK (0x3F
> << 16)
> +#define CRI_LOADGEN_SEL(x) ((x) <<
> 12)
> +#define CRI_LOADGEN_SEL_MASK (0x3 <<
> 12)
Since you're drive-by fixing things you may as well add the two
additional spaces required for bit macros (between #define and the
macro name), and then also add the spaces in the new registers defined
later. This applies to the registers above too.
> +
> +#define MG_CLKHUB_LN0_PORT1 0x16839C
> +#define MG_CLKHUB_LN1_PORT1 0x16879C
> +#define MG_CLKHUB_LN0_PORT2 0x16939C
> +#define MG_CLKHUB_LN1_PORT2 0x16979C
> +#define MG_CLKHUB_LN0_PORT3 0x16A39C
> +#define MG_CLKHUB_LN1_PORT3 0x16A79C
> +#define MG_CLKHUB_LN0_PORT4 0x16B39C
> +#define MG_CLKHUB_LN1_PORT4 0x16B79C
> +#define MG_CLKHUB(port, ln) \
> + MG_PHY_PORT_LN(port, ln, MG_CLKHUB_LN0_PORT1, \
> + MG_CLKHUB_LN0_PORT2, \
> + MG_CLKHUB_LN1_PORT1)
> +#define CFG_LOW_RATE_LKREN_EN (1 <<
> 11)
> +
> +#define MG_TX_DCC_TX1LN0_PORT1 0x168110
> +#define MG_TX_DCC_TX1LN1_PORT1 0x168510
> +#define MG_TX_DCC_TX1LNO_PORT2 0x169110
Here and in many cases below: s/O/0/
> +#define MG_TX_DCC_TX1LN1_PORT2 0x169510
> +#define MG_TX_DCC_TX1LNO_PORT3 0x16A110
> +#define MG_TX_DCC_TX1LN1_PORT3 0x16A510
> +#define MG_TX_DCC_TX1LNO_PORT4 0x16B110
> +#define MG_TX_DCC_TX1LN1_PORT4 0x16B510
> +#define MG_TX1_DCC(port, ln) \
> + MG_PHY_PORT_LN(port, ln, MG_TX_DCC_TX1LN0_PORT1, \
> + MG_TX_DCC_TX1LNO_PORT2, \
> + MG_TX_DCC_TX1LN1_PORT1)
> +#define MG_TX_DCC_TX2LN0_PORT1 0x168090
> +#define MG_TX_DCC_TX2LN1_PORT1 0x168490
> +#define MG_TX_DCC_TX2LNO_PORT2 0x169090
> +#define MG_TX_DCC_TX2LN1_PORT2 0x169490
> +#define MG_TX_DCC_TX2LNO_PORT3 0x16A090
> +#define MG_TX_DCC_TX2LN1_PORT3 0x16A490
> +#define MG_TX_DCC_TX2LNO_PORT4 0x16B090
> +#define MG_TX_DCC_TX2LN1_PORT4 0x16B490
> +#define MG_TX2_DCC(port, ln) \
> + MG_PHY_PORT_LN(port, ln, MG_TX_DCC_TX2LN0_PORT1, \
> + MG_TX_DCC_TX2LNO_PORT2, \
> + MG_TX_DCC_TX2LN1_PORT1)
> +#define CFG_AMI_CK_DIV_OVERRIDE_EN (1 << 24)
Definitions for bit 24 should go below definitions for bit 25. See the
big comment at the top of the file.
Otherwise, looks good.
> +#define CFG_AMI_CK_DIV_OVERRIDE_VAL(x) ((x) << 25)
> +#define CFG_AMI_CK_DIV_OVERRIDE_VAL_MASK (0x3 << 25)
>
> /* The spec defines this only for BXT PHY0, but lets assume that
> this
> * would exist for PHY1 too if it had a second channel.
More information about the Intel-gfx
mailing list