[Intel-gfx] [PATCH 1/8] drm/i915/icl: compute the TBT PLL registers

[Paulo Zanoni]

Em Qui, 2018-07-12 às 17:16 -0700, Rodrigo Vivi escreveu:
> On Wed, Jul 11, 2018 at 02:59:02PM -0700, Paulo Zanoni wrote:
> > Use the hardcoded tables provided by our spec.
> > 
> > v2:
> >   - SSC stays disabled.
> >   - Use intel_port_is_tc().
> > 
> > Cc: Anusha Srivatsa <anusha.srivatsa at intel.com>
> > Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
> > ---
> >  drivers/gpu/drm/i915/intel_dpll_mgr.c | 22 +++++++++++++++++++++-
> >  1 file changed, 21 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > index b51ad2917dbe..7e5e6eb5dfe2 100644
> > --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > @@ -2452,6 +2452,16 @@ static const struct skl_wrpll_params
> > icl_dp_combo_pll_19_2MHz_values[] = {
> >  	  .pdiv = 0x1 /* 2 */, .kdiv = 1, .qdiv_mode = 0,
> > .qdiv_ratio = 0},
> >  };
> >  
> > +static const struct skl_wrpll_params icl_tbt_pll_24MHz_values = {
> > +	.dco_integer = 0x151, .dco_fraction = 0x4000,
> 
> I see 0x151 is the most common for 24MHz, but not the only one.
> I also see 0x168 and 0x195, depending on the link rate.
> 
> So, what am I missing?

Are you looking at the table inside the Combo PLL section instead of
the TBT PLL section? On that same page you are, scroll down by a lot
until the "TBT PLL Divider Values" table inside the TBT section.


> 
> > +	.pdiv = 0x4 /* 5 */, .kdiv = 1, .qdiv_mode = 0,
> > .qdiv_ratio = 0,
> > +};
> > +
> > +static const struct skl_wrpll_params icl_tbt_pll_19_2MHz_values =
> > {
> > +	.dco_integer = 0x1A5, .dco_fraction = 0x7000,
> > +	.pdiv = 0x4 /* 5 */, .kdiv = 1, .qdiv_mode = 0,
> > .qdiv_ratio = 0,
> > +};
> > +
> >  static bool icl_calc_dp_combo_pll(struct drm_i915_private
> > *dev_priv, int clock,
> >  				  struct skl_wrpll_params
> > *pll_params)
> >  {
> > @@ -2494,6 +2504,14 @@ static bool icl_calc_dp_combo_pll(struct
> > drm_i915_private *dev_priv, int clock,
> >  	return true;
> >  }
> >  
> > +static bool icl_calc_tbt_pll(struct drm_i915_private *dev_priv,
> > int clock,
> > +			     struct skl_wrpll_params *pll_params)
> > +{
> > +	*pll_params = dev_priv->cdclk.hw.ref == 24000 ?
> > +			icl_tbt_pll_24MHz_values :
> > icl_tbt_pll_19_2MHz_values;
> > +	return true;
> > +}
> > +
> >  static bool icl_calc_dpll_state(struct intel_crtc_state
> > *crtc_state,
> >  				struct intel_encoder *encoder, int
> > clock,
> >  				struct intel_dpll_hw_state
> > *pll_state)
> > @@ -2503,7 +2521,9 @@ static bool icl_calc_dpll_state(struct
> > intel_crtc_state *crtc_state,
> >  	struct skl_wrpll_params pll_params = { 0 };
> >  	bool ret;
> >  
> > -	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
> > +	if (intel_port_is_tc(dev_priv, encoder->port))
> > +		ret = icl_calc_tbt_pll(dev_priv, clock,
> > &pll_params);
> > +	else if (intel_crtc_has_type(crtc_state,
> > INTEL_OUTPUT_HDMI))
> >  		ret = cnl_ddi_calculate_wrpll(clock, dev_priv,
> > &pll_params);
> >  	else
> >  		ret = icl_calc_dp_combo_pll(dev_priv, clock,
> > &pll_params);
> > -- 
> > 2.14.4
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx