[Intel-gfx] [PATCH 1/4] drm/i915/icl: Add VIDEO_DIP regsiters

[Rodrigo Vivi]

On Wed, Jul 18, 2018 at 11:53:54AM -0700, Manasi Navare wrote:
> On Tue, Jul 17, 2018 at 02:10:58PM -0700, Anusha Srivatsa wrote:
> > From: "Srivatsa, Anusha" <anusha.srivatsa at intel.com>
> > 
> > The Picture Parameter Set metadata for DSC has to be sent
> > to the panel through secondary data packets. Add the error
> > correction registers, data registers and control registers
> > for the same.
> > 
> > The control registers for  transcoders A and B are already
> > defined and will be reused for Icelake purpose. This patch adds
> > Control register for EDP and transcoder C apart from adding the
> > PPS data and error registers.
> > 
> > v2: reuse MMIO_TRANS2 for _PPS_DATA and _PPS_ECC.
> > The  _MMIO_TRANS2(pipe, reg) macro definition takes care of the eDp case
> > 
> > Cc: Jani Nikula <jani.nikula at intel.com>
> > Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> > Cc: Manasi Navare <manasi.d.navare at intel.com>
> > Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
> 
> Checked against the spec and tested it.
> 
> Reviewed-by: Manasi Navare <manasi.d.navare at intel.com>
> 
> > ---
> >  drivers/gpu/drm/i915/i915_reg.h | 23 +++++++++++++++++++++++
> >  1 file changed, 23 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index 1f222af..23e70a4 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -4605,6 +4605,16 @@ enum {
> >  #define   VIDEO_DIP_ENABLE_GMP_HSW	(1 << 4)
> >  #define   VIDEO_DIP_ENABLE_SPD_HSW	(1 << 0)
> >  
> > +#define  DRM_DIP_ENABLE			(1 << 28)
> > +#define  PSR_VSC_BIT_7_SET		(1 << 27)
> > +#define  VSC_SELECT_MASK		(0x3 << 26)
> > +#define  VSC_SELECT_SHIFT		26
> > +#define  VSC_DIP_HW_HEA_DATA		(0 << 26)
> > +#define  VSC_DIP_HW_HEA_SW_DATA		(1 << 26)
> > +#define  VSC_DIP_HW_DATA_SW_HEA		(2 << 26)
> > +#define  VSC_DIP_SW_HEA_DATA		(3 << 26)
> > +#define  VDIP_ENABLE_PPS		(1 << 24)
> > +
> >  /* Panel power sequencing */
> >  #define PPS_BASE			0x61200
> >  #define VLV_PPS_BASE			(VLV_DISPLAY_BASE + PPS_BASE)
> > @@ -7843,12 +7853,25 @@ enum {
> >  #define _HSW_VIDEO_DIP_VSC_ECC_B	0x61344
> >  #define _HSW_VIDEO_DIP_GCP_B		0x61210
> >  
> > +/* Icelake PPS_DATA and _ECC DIP Registers.
> > + * These are available for transcoders B,C and eDP.
> > + * Adding the _A so as to reuse the _MMIO_TRANS2
> > + * definition, with which it offsets to the right location.
> > + */
> > +
> > +#define _ICL_VIDEO_DIP_PPS_DATA_A	0x60350
> > +#define _ICL_VIDEO_DIP_PPS_DATA_B	0x61350
> > +#define _ICL_VIDEO_DIP_PPS_ECC_A	0x603D4
> > +#define _ICL_VIDEO_DIP_PPS_ECC_B	0x613D4
> > +
> >  #define HSW_TVIDEO_DIP_CTL(trans)		_MMIO_TRANS2(trans, _HSW_VIDEO_DIP_CTL_A)
> >  #define HSW_TVIDEO_DIP_AVI_DATA(trans, i)	_MMIO_TRANS2(trans, _HSW_VIDEO_DIP_AVI_DATA_A + (i) * 4)
> >  #define HSW_TVIDEO_DIP_VS_DATA(trans, i)	_MMIO_TRANS2(trans, _HSW_VIDEO_DIP_VS_DATA_A + (i) * 4)
> >  #define HSW_TVIDEO_DIP_SPD_DATA(trans, i)	_MMIO_TRANS2(trans, _HSW_VIDEO_DIP_SPD_DATA_A + (i) * 4)
> >  #define HSW_TVIDEO_DIP_GCP(trans)		_MMIO_TRANS2(trans, _HSW_VIDEO_DIP_GCP_A)
> >  #define HSW_TVIDEO_DIP_VSC_DATA(trans, i)	_MMIO_TRANS2(trans, _HSW_VIDEO_DIP_VSC_DATA_A + (i) * 4)
> > +#define ICL_VIDEO_DIP_PPS_DATA(trans, i)	_MMIO_TRANS2(trans, _ICL_VIDEO_DIP_PPS_DATA_A + (i) * 4)
> > +#define ICL_VIDEO_DIP_PPS_ECC(trans, i)		_MMIO_TRANS2(trans, _ICL_VIDEO_DIP_PPS_ECC_A + (i) * 4)

need to make checkpatch happy here ^

> >  
> >  #define _HSW_STEREO_3D_CTL_A		0x70020
> >  #define   S3D_ENABLE			(1 << 31)
> > -- 
> > 2.7.4
> > 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx