[Intel-gfx] [PATCH v5 09/13] drm/i915/icl: Program TA_TIMING_PARAM registers

[Ville Syrjälä]

On Tue, Jul 10, 2018 at 03:10:10PM +0530, Madhav Chauhan wrote:
> This patch programs D-PHY timing parameters for the
> bus turn around flow(in escape clocks) only if dsi link
> frequency <=800 MHz using DPHY_TA_TIMING_PARAM and its
> identical register DSI_TA_TIMING_PARAM (inside DSI
> Controller within the Display Core).
> 
> Signed-off-by: Madhav Chauhan <madhav.chauhan at intel.com>
> ---
>  drivers/gpu/drm/i915/icl_dsi.c       | 21 +++++++++++++++++++++
>  drivers/gpu/drm/i915/intel_dsi.h     |  1 +
>  drivers/gpu/drm/i915/intel_dsi_vbt.c |  1 +
>  3 files changed, 23 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/icl_dsi.c b/drivers/gpu/drm/i915/icl_dsi.c
> index 832772d..8fd5284 100644
> --- a/drivers/gpu/drm/i915/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/icl_dsi.c
> @@ -302,6 +302,27 @@ static void gen11_dsi_setup_dphy_timings(struct intel_encoder *encoder)
>  		I915_WRITE(DSI_DATA_TIMING_PARAM(port),
>  			   intel_dsi->dphy_data_lane_reg);
>  	}
> +
> +	/*
> +	 * If DSI link operating at or below an 800 MHz,
> +	 * TA_SURE should be override and programmed to
> +	 * a value '0' inside TA_PARAM_REGISTERS otherwise
> +	 * leave all fields at HW default values.
> +	 */
> +	if (intel_dsi->bitrate_khz <= KHz(800)) {

The KHz(800) confuses me. My brain thinks this value is 800 kHz when
it's not. So I'd write it without the KHz() macro.

> +		for_each_dsi_port(port, intel_dsi->ports) {
> +			tmp = I915_READ(DPHY_TA_TIMING_PARAM(port));
> +			tmp &= ~TA_SURE_TIME_MASK;
> +			tmp |= (TA_SURE_OVERRIDE | TA_SURE_TIME(0));
> +			I915_WRITE(DPHY_TA_TIMING_PARAM(port), tmp);
> +
> +			/* shadow register inside display core */
> +			tmp = I915_READ(DSI_TA_TIMING_PARAM(port));
> +			tmp &= ~TA_SURE_TIME_MASK;
> +			tmp |= (TA_SURE_OVERRIDE | TA_SURE_TIME(0));
> +			I915_WRITE(DSI_TA_TIMING_PARAM(port), tmp);
> +		}
> +	}
>  }
>  
>  static void gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder)
> diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
> index 9fd8526..25e7396 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.h
> +++ b/drivers/gpu/drm/i915/intel_dsi.h
> @@ -101,6 +101,7 @@ struct intel_dsi {
>  
>  	u16 init_count;
>  	u32 pclk;
> +	u32 bitrate_khz;
>  	u16 burst_mode_ratio;
>  
>  	/* all delays in ms */
> diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
> index 428290d..a9a98a4 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
> @@ -589,6 +589,7 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>  	intel_dsi->pclk = pclk;
>  
>  	bitrate = (pclk * bpp) / intel_dsi->lane_count;
> +	intel_dsi->bitrate_khz = bitrate;
>  
>  	switch (intel_dsi->escape_clk_div) {
>  	case 0:
> -- 
> 2.7.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel