[Intel-gfx] [PATCH 2/2] drm/i915: implement EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT

[Rodrigo Vivi]

On Mon, Jul 23, 2018 at 02:27:35PM -0700, matthew.s.atwood at intel.com wrote:
> From: Matt Atwood <matthew.s.atwood at intel.com>
> 
> According to DP spec (2.9.3.1 of DP 1.4) if
> EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT is set the addresses in DPCD
> 02200h through 0220Fh shall contain the DPRX's true capability. These
> values will match 00000h through 0000Fh, except for DPCD_REV,
> MAX_LINK_RATE, DOWN_STREAM_PORT_PRESENT.
> 
> Read from DPCD once for all 3 values as this is an expensive operation.
> Spec mentions that all of address space 02200h through 0220Fh should
> contain the right information however currently only 3 values can
> differ.
> 
> There is no address space in the intel_dp->dpcd struct for addresses
> 02200h through 0220Fh, and since so much of the data is a identical,
> simply overwrite the values stored in 00000h through 0000Fh with the
> values that can be overwritten from addresses 02200h through 0220Fh.
> 
> This patch helps with backward compatibility for devices pre DP1.3.
> 
> v2: read only dpcd values which can be affected, remove incorrect check,
> split into drm include changes into separate patch, commit message,
> verbose debugging statements during overwrite.
> v3: white space fixes
> v4: make path dependent on DPCD revision > 1.2
> v5: split into function, removed DPCD rev check
> 
> Signed-off-by: Matt Atwood <matthew.s.atwood at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_dp.c | 54 +++++++++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index dde92e4af5d3..ed16b93bfe40 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3731,6 +3731,58 @@ intel_dp_link_down(struct intel_encoder *encoder,
>  	}
>  }
>  
> +static void
> +intel_dp_extended_receiver_capabilities(struct intel_dp *intel_dp)
> +{
> +	/*
> +	 * Prior to DP1.3 the bit represented by
> +	 * DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT was reserved.
> +	 * if it is set DP_DPCD_REV at 0000h could be at a value less than
> +	 * the true capability of the panel. The only way to check is to
> +	 * then compare 0000h and 2200h.
> +	 */
> +	if (intel_dp->dpcd[DP_TRAINING_AUX_RD_INTERVAL] &
> +	    DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT) {
> +		uint8_t dpcd_ext[6];
> +
> +		DRM_DEBUG_KMS("DPCD: Extended Receiver Capability Field Present, accessing 02200h through 022FFh\n");
> +
> +		if (drm_dp_dpcd_read(&intel_dp->aux, DP_DP13_DPCD_REV,
> +				     &dpcd_ext, sizeof(dpcd_ext)) < 0)
> +			return;
> +
> +		if (intel_dp->dpcd[DP_DPCD_REV] > dpcd_ext[DP_DPCD_REV])
> +			return;

I'm still missing the debug messages here and above... 

> +
> +		if (memcmp(&intel_dp->dpcd[DP_DPCD_REV], &dpcd_ext[DP_DPCD_REV],
> +			   sizeof(u8))) {
> +			DRM_DEBUG_KMS("DPCD: new value for DPCD Revision previous value %2x new value %2x\n",
> +				      intel_dp->dpcd[DP_DPCD_REV],
> +				      dpcd_ext[DP_DPCD_REV]);
> +			memcpy(&intel_dp->dpcd[DP_DPCD_REV],
> +			       &dpcd_ext[DP_DPCD_REV], sizeof(u8));
> +		}
> +		if (memcmp(&intel_dp->dpcd[DP_MAX_LINK_RATE],
> +			   &dpcd_ext[DP_MAX_LINK_RATE], sizeof(u8))) {
> +			DRM_DEBUG_KMS("DPCD: new value for DPCD Max Link Rate previous value %2x new value %2x\n",
> +				      intel_dp->dpcd[DP_MAX_LINK_RATE],
> +				      dpcd_ext[DP_MAX_LINK_RATE]);
> +			memcpy(&intel_dp->dpcd[DP_MAX_LINK_RATE],
> +			       &dpcd_ext[DP_MAX_LINK_RATE], sizeof(u8));
> +		}
> +		if (memcmp(&intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT],
> +			   &dpcd_ext[DP_DOWNSTREAMPORT_PRESENT], sizeof(u8))) {
> +			DRM_DEBUG_KMS("DPCD: new value for DPCD Downstream Port Present  previous value %2x new value %2x\n",
> +				      intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT],
> +				      dpcd_ext[DP_DOWNSTREAMPORT_PRESENT]);
> +			memcpy(&intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT],
> +			       &dpcd_ext[DP_DOWNSTREAMPORT_PRESENT],
> +			       sizeof(u8));
> +		}
> +	}
> +}
> +
> +
>  bool
>  intel_dp_read_dpcd(struct intel_dp *intel_dp)
>  {
> @@ -3738,6 +3790,8 @@ intel_dp_read_dpcd(struct intel_dp *intel_dp)
>  			     sizeof(intel_dp->dpcd)) < 0)
>  		return false; /* aux transfer failed */
>  
> +	intel_dp_extended_receiver_capabilities(intel_dp);
> +
>  	DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp->dpcd), intel_dp->dpcd);
>  
>  	return intel_dp->dpcd[DP_DPCD_REV] != 0;
> -- 
> 2.17.1
>