[Intel-gfx] [PATCH 1/3] drm/i915/cnl+: Reload CSR firmware when coming back from low power states

[Rodrigo Vivi]

On Fri, Jul 27, 2018 at 04:36:24PM -0700, José Roberto de Souza wrote:
> When returning from low power states the CSR firmware was not being
> loaded again in CNL and ICL.
> Also taking the opportunity to share the load call for gen >= 9,
> instead of calling it from each display_core_init() function.
> 
> Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> Cc: Anusha Srivatsa <anusha.srivatsa at intel.com>

Cc: Imre Deak <imre.deak at intel.com>

> Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
> ---
>  drivers/gpu/drm/i915/i915_drv.c         |  9 ++++++---
>  drivers/gpu/drm/i915/intel_runtime_pm.c | 13 ++++---------
>  2 files changed, 10 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> index 18a45e7a3d7c..a42f0dfe19da 100644
> --- a/drivers/gpu/drm/i915/i915_drv.c
> +++ b/drivers/gpu/drm/i915/i915_drv.c
> @@ -2699,9 +2699,12 @@ static int intel_runtime_resume(struct device *kdev)
>  	if (IS_GEN9_LP(dev_priv)) {
>  		bxt_disable_dc9(dev_priv);
>  		bxt_display_core_init(dev_priv, true);
> -		if (dev_priv->csr.dmc_payload &&
> -		    (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_UPTO_DC5))
> -			gen9_enable_dc5(dev_priv);
> +		if (dev_priv->csr.dmc_payload) {
> +			intel_csr_load_program(dev_priv);
> +			if (dev_priv->csr.allowed_dc_mask &
> +			    DC_STATE_EN_UPTO_DC5)
> +				gen9_enable_dc5(dev_priv);
> +		}
>  	} else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
>  		hsw_disable_pc8(dev_priv);
>  	} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index cf89141b2281..8fdcffe023fe 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -3075,9 +3075,6 @@ static void skl_display_core_init(struct drm_i915_private *dev_priv,
>  	skl_init_cdclk(dev_priv);
>  
>  	gen9_dbuf_enable(dev_priv);
> -
> -	if (resume && dev_priv->csr.dmc_payload)
> -		intel_csr_load_program(dev_priv);

and resume becomes unsed, so please kill it.

>  }
>  
>  static void skl_display_core_uninit(struct drm_i915_private *dev_priv)
> @@ -3140,9 +3137,6 @@ void bxt_display_core_init(struct drm_i915_private *dev_priv,
>  	bxt_init_cdclk(dev_priv);
>  
>  	gen9_dbuf_enable(dev_priv);
> -
> -	if (resume && dev_priv->csr.dmc_payload)
> -		intel_csr_load_program(dev_priv);

same

>  }
>  
>  void bxt_display_core_uninit(struct drm_i915_private *dev_priv)
> @@ -3283,9 +3277,6 @@ static void cnl_display_core_init(struct drm_i915_private *dev_priv, bool resume
>  
>  	/* 6. Enable DBUF */
>  	gen9_dbuf_enable(dev_priv);
> -
> -	if (resume && dev_priv->csr.dmc_payload)
> -		intel_csr_load_program(dev_priv);

same

>  }
>  
>  static void cnl_display_core_uninit(struct drm_i915_private *dev_priv)
> @@ -3561,6 +3552,10 @@ void intel_power_domains_init_hw(struct drm_i915_private *dev_priv, bool resume)
>  
>  	/* For now, we need the power well to be always enabled. */
>  	intel_display_set_init_power(dev_priv, true);
> +
> +	if (INTEL_GEN(dev_priv) >= 9 && resume && dev_priv->csr.dmc_payload)
> +		intel_csr_load_program(dev_priv);
> +
>  	/* Disable power support if the user asked so. */
>  	if (!i915_modparams.disable_power_well)
>  		intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
> -- 
> 2.18.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx