[Intel-gfx] [PATCH v2 02/23] drm/i915/dp: Cache the DP/eDP DSC DPCD register set on Hotplug/eDP Init

[Srivatsa, Anusha]

>-----Original Message-----
>From: Navare, Manasi D
>Sent: Tuesday, July 31, 2018 2:07 PM
>To: intel-gfx at lists.freedesktop.org
>Cc: Navare, Manasi D <manasi.d.navare at intel.com>; Jani Nikula
><jani.nikula at linux.intel.com>; Ville Syrjala <ville.syrjala at linux.intel.com>; Daniel
>Vetter <daniel.vetter at ffwll.ch>; Srivatsa, Anusha <anusha.srivatsa at intel.com>;
>Singh, Gaurav K <gaurav.k.singh at intel.com>
>Subject: [PATCH v2 02/23] drm/i915/dp: Cache the DP/eDP DSC DPCD register set
>on Hotplug/eDP Init
>
>DSC is supported on eDP starting GEN 10 display and on DP starting GEN 11.
>This patch implements the discovery phase of DSC. On hotplug, source reads the
>DSC DPCD register set (0x00060 - 0x006F) to read the decompression capabilities
>of the sink device.

A  sentence telling that DSC on eDP is supported on Geminilake would be more clear. In the code below, we check if it is gen10 or GLK. The commit message speaks of DSC support only for Gen10+ for eDP and Gen 11+ for DP.

Implementation looks good.

>This entire block of registers is cached in intel_dp so that capability information
>can be used during DSC configuration phase during compute_config phase of the
>modeset.
>For eDP, this caching happens during the eDP initialization.
>This caching is done only for eDP and DP rev >= 1.4
>
>v5:
>* Fix the block comment (Gaurav)
>* Use DRM_ERROR for dpcd_read fail (Gaurav,Anusha)
>v4:
>* Cache these only for Gen >= 11
>v3:
>* Remove the dsc_sink_support field in intel_dp (Jani N)
>v2:
>* Clear the cached registers on hotplug always (Jani N)
>* Combine the eDP and DP caching in same function (Jani N)
>
>Cc: Jani Nikula <jani.nikula at linux.intel.com>
>Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
>Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
>Cc: Anusha Srivatsa <anusha.srivatsa at intel.com>
>Cc: Gaurav K Singh <gaurav.k.singh at intel.com>
>Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa at intel.com>

>---
> drivers/gpu/drm/i915/intel_dp.c  | 32 ++++++++++++++++++++++++++++++++
>drivers/gpu/drm/i915/intel_drv.h |  1 +
> 2 files changed, 33 insertions(+)
>
>diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
>index 8e0e14b..afa4e2d 100644
>--- a/drivers/gpu/drm/i915/intel_dp.c
>+++ b/drivers/gpu/drm/i915/intel_dp.c
>@@ -3877,6 +3877,29 @@ intel_dp_read_dpcd(struct intel_dp *intel_dp)
> 	return intel_dp->dpcd[DP_DPCD_REV] != 0;  }
>
>+static void intel_dp_get_dsc_sink_cap(struct intel_dp *intel_dp) {
>+	/*
>+	 *Clear the cached register set to avoid using stale values
>+	 * for the sinks that do not support DSC.
>+	 */
>+	memset(intel_dp->dsc_dpcd, 0, sizeof(intel_dp->dsc_dpcd));
>+
>+	/* Cache the DSC DPCD if eDP or DP rev >= 1.4 */
>+	if (intel_dp->dpcd[DP_DPCD_REV] >= 0x14 ||
>+	    intel_dp->edp_dpcd[0] >= DP_EDP_14) {
>+		if (drm_dp_dpcd_read(&intel_dp->aux, DP_DSC_SUPPORT,
>+				     intel_dp->dsc_dpcd,
>+				     sizeof(intel_dp->dsc_dpcd)) < 0)
>+			DRM_ERROR("Failed to read DPCD register 0x%x\n",
>+				  DP_DSC_SUPPORT);
>+
>+		DRM_DEBUG_KMS("DSC DPCD: %*ph\n",
>+			      (int)sizeof(intel_dp->dsc_dpcd),
>+			      intel_dp->dsc_dpcd);
>+	}
>+}
>+
> static bool
> intel_edp_init_dpcd(struct intel_dp *intel_dp)  { @@ -3953,6 +3976,10 @@
>intel_edp_init_dpcd(struct intel_dp *intel_dp)
>
> 	intel_dp_set_common_rates(intel_dp);
>
>+	/* Read the eDP DSC DPCD registers */
>+	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
>+		intel_dp_get_dsc_sink_cap(intel_dp);
>+
> 	return true;
> }
>
>@@ -4944,6 +4971,7 @@ intel_dp_long_pulse(struct intel_connector
>*connector)
>
> 	if (status == connector_status_disconnected) {
> 		memset(&intel_dp->compliance, 0, sizeof(intel_dp-
>>compliance));
>+		memset(intel_dp->dsc_dpcd, 0, sizeof(intel_dp->dsc_dpcd));
>
> 		if (intel_dp->is_mst) {
> 			DRM_DEBUG_KMS("MST device may have disappeared
>%d vs %d\n", @@ -4969,6 +4997,10 @@ intel_dp_long_pulse(struct
>intel_connector *connector)
>
> 	intel_dp_print_rates(intel_dp);
>
>+	/* Read DP Sink DSC Cap DPCD regs for DP v1.4 */
>+	if (INTEL_GEN(dev_priv) >= 11)
>+		intel_dp_get_dsc_sink_cap(intel_dp);
>+
> 	drm_dp_read_desc(&intel_dp->aux, &intel_dp->desc,
> 			 drm_dp_is_branch(intel_dp->dpcd));
>
>diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
>index 99a5f5b..29abe7a 100644
>--- a/drivers/gpu/drm/i915/intel_drv.h
>+++ b/drivers/gpu/drm/i915/intel_drv.h
>@@ -1070,6 +1070,7 @@ struct intel_dp {
> 	uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];
> 	uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS];
> 	uint8_t edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE];
>+	u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE];
> 	/* source rates */
> 	int num_source_rates;
> 	const int *source_rates;
>--
>2.7.4