[Intel-gfx] [PATCH v3 09/12] drm/i915/gvt: Enable virtual display support for BXT.

Colin Xu colin.xu at intel.com
Mon Jun 11 07:39:37 UTC 2018


Virtual monitor on BXT start from port B.
Unlike SKL/KBL, digital display port connectivity is detected via
GEN8_DE_PORT_ISR so emulate monitor state change by setting it.

Signed-off-by: Colin Xu <colin.xu at intel.com>
---
 drivers/gpu/drm/i915/gvt/display.c | 23 +++++++++++++++++++++++
 drivers/gpu/drm/i915/gvt/edid.c    | 20 +++++++++++++++++++-
 2 files changed, 42 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/gvt/display.c b/drivers/gpu/drm/i915/gvt/display.c
index 38521fa81bf9..6ee50cb328f8 100644
--- a/drivers/gpu/drm/i915/gvt/display.c
+++ b/drivers/gpu/drm/i915/gvt/display.c
@@ -171,6 +171,29 @@ static void emulate_monitor_status_change(struct intel_vgpu *vgpu)
 	struct drm_i915_private *dev_priv = vgpu->gvt->dev_priv;
 	int pipe;
 
+	if (IS_BROXTON(dev_priv)) {
+		vgpu_vreg_t(vgpu, GEN8_DE_PORT_ISR) &= ~(BXT_DE_PORT_HP_DDIA |
+			BXT_DE_PORT_HP_DDIB |
+			BXT_DE_PORT_HP_DDIC);
+
+		if (intel_vgpu_has_monitor_on_port(vgpu, PORT_A)) {
+			vgpu_vreg_t(vgpu, GEN8_DE_PORT_ISR) |=
+				BXT_DE_PORT_HP_DDIA;
+		}
+
+		if (intel_vgpu_has_monitor_on_port(vgpu, PORT_B)) {
+			vgpu_vreg_t(vgpu, GEN8_DE_PORT_ISR) |=
+				BXT_DE_PORT_HP_DDIB;
+		}
+
+		if (intel_vgpu_has_monitor_on_port(vgpu, PORT_C)) {
+			vgpu_vreg_t(vgpu, GEN8_DE_PORT_ISR) |=
+				BXT_DE_PORT_HP_DDIC;
+		}
+
+		return;
+	}
+
 	vgpu_vreg_t(vgpu, SDEISR) &= ~(SDE_PORTB_HOTPLUG_CPT |
 			SDE_PORTC_HOTPLUG_CPT |
 			SDE_PORTD_HOTPLUG_CPT);
diff --git a/drivers/gpu/drm/i915/gvt/edid.c b/drivers/gpu/drm/i915/gvt/edid.c
index f61337632969..4b98539025c5 100644
--- a/drivers/gpu/drm/i915/gvt/edid.c
+++ b/drivers/gpu/drm/i915/gvt/edid.c
@@ -77,6 +77,20 @@ static unsigned char edid_get_byte(struct intel_vgpu *vgpu)
 	return chr;
 }
 
+static inline int bxt_get_port_from_gmbus0(u32 gmbus0)
+{
+	int port_select = gmbus0 & _GMBUS_PIN_SEL_MASK;
+	int port = -EINVAL;
+
+	if (port_select == 1)
+		port = PORT_B;
+	else if (port_select == 2)
+		port = PORT_C;
+	else if (port_select == 3)
+		port = PORT_D;
+	return port;
+}
+
 static inline int get_port_from_gmbus0(u32 gmbus0)
 {
 	int port_select = gmbus0 & _GMBUS_PIN_SEL_MASK;
@@ -105,6 +119,7 @@ static void reset_gmbus_controller(struct intel_vgpu *vgpu)
 static int gmbus0_mmio_write(struct intel_vgpu *vgpu,
 			unsigned int offset, void *p_data, unsigned int bytes)
 {
+	struct drm_i915_private *dev_priv = vgpu->gvt->dev_priv;
 	int port, pin_select;
 
 	memcpy(&vgpu_vreg(vgpu, offset), p_data, bytes);
@@ -116,7 +131,10 @@ static int gmbus0_mmio_write(struct intel_vgpu *vgpu,
 	if (pin_select == 0)
 		return 0;
 
-	port = get_port_from_gmbus0(pin_select);
+	if (IS_BROXTON(dev_priv))
+		port = bxt_get_port_from_gmbus0(pin_select);
+	else
+		port = get_port_from_gmbus0(pin_select);
 	if (WARN_ON(port < 0))
 		return 0;
 
-- 
2.17.1



More information about the Intel-gfx mailing list