[Intel-gfx] [PATCH 2/2] drm/i915: Turn off g4x DP port in .post_disable()

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

While Bspec doesn't list a specific sequence for turning off the DP port
on g4x we are getting an underrun if the port is disabled in the
.disable() hook. Looks like the pipe stops when the port stops, and by
that time the plane disable may not have completed yet. Also the plane(s)
seem to end up in some wonky state when this happens as they also signal
another underrun immediately after we turn them back on during the next
enable sequence.

We could add a vblank wait in .disable() to avoid wedging the planes,
but I assume we're still tripping up the pipe in some way. So it seems
better to me to just follow the ILK+ sequence and turn off the DP port
in .post_disable() instead. This sequence doesn't seem to suffer from
this problem. Could be it was always the intended sequence for DP and
the gen4 bspec was just never updated to include it.

Cc: stable at vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 26 +++++++++-----------------
 1 file changed, 9 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 6068986fd985..5f09a8015c89 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2803,16 +2803,6 @@ static void intel_disable_dp(struct intel_encoder *encoder,
 static void g4x_disable_dp(struct intel_encoder *encoder,
 			   const struct intel_crtc_state *old_crtc_state,
 			   const struct drm_connector_state *old_conn_state)
-{
-	intel_disable_dp(encoder, old_crtc_state, old_conn_state);
-
-	/* disable the port before the pipe on g4x */
-	intel_dp_link_down(encoder, old_crtc_state);
-}
-
-static void ilk_disable_dp(struct intel_encoder *encoder,
-			   const struct intel_crtc_state *old_crtc_state,
-			   const struct drm_connector_state *old_conn_state)
 {
 	intel_disable_dp(encoder, old_crtc_state, old_conn_state);
 }
@@ -2828,13 +2818,19 @@ static void vlv_disable_dp(struct intel_encoder *encoder,
 	intel_disable_dp(encoder, old_crtc_state, old_conn_state);
 }
 
-static void ilk_post_disable_dp(struct intel_encoder *encoder,
+static void g4x_post_disable_dp(struct intel_encoder *encoder,
 				const struct intel_crtc_state *old_crtc_state,
 				const struct drm_connector_state *old_conn_state)
 {
 	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
 	enum port port = encoder->port;
 
+	/*
+	 * Bspec does not list a specific disable sequence for g4x DP.
+	 * Follow the ilk+ sequence (disable pipe before the port) for
+	 * g4x DP as it does not suffer from underruns like the normal
+	 * g4x modeset sequence (disable pipe after the port).
+	 */
 	intel_dp_link_down(encoder, old_crtc_state);
 
 	/* Only ilk+ has port A */
@@ -6450,15 +6446,11 @@ bool intel_dp_init(struct drm_i915_private *dev_priv,
 		intel_encoder->enable = vlv_enable_dp;
 		intel_encoder->disable = vlv_disable_dp;
 		intel_encoder->post_disable = vlv_post_disable_dp;
-	} else if (INTEL_GEN(dev_priv) >= 5) {
-		intel_encoder->pre_enable = g4x_pre_enable_dp;
-		intel_encoder->enable = g4x_enable_dp;
-		intel_encoder->disable = ilk_disable_dp;
-		intel_encoder->post_disable = ilk_post_disable_dp;
-	} else {
+	} else{
 		intel_encoder->pre_enable = g4x_pre_enable_dp;
 		intel_encoder->enable = g4x_enable_dp;
 		intel_encoder->disable = g4x_disable_dp;
+		intel_encoder->post_disable = g4x_post_disable_dp;
 	}
 
 	intel_dig_port->dp.output_reg = output_reg;
-- 
2.16.4