[Intel-gfx] [PATCH 2/5] drm/i915/ddi: Push pipe clock enabling to encoders

[Imre Deak]

On ICL the pipe clock needs to be enabled before setting the HDMI
infoframe, but these steps are in the reverse order atm. Move the pipe
clock enabling to the encoders, so reordering of the two steps can be
done in a clean way.

No functional change.

Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/i915/intel_crt.c     | 4 ++++
 drivers/gpu/drm/i915/intel_ddi.c     | 8 ++++++++
 drivers/gpu/drm/i915/intel_display.c | 6 ------
 3 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 211d601cd1b1..8daf170302a0 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -232,6 +232,8 @@ static void hsw_post_disable_crt(struct intel_encoder *encoder,
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 
+	intel_ddi_disable_pipe_clock(old_crtc_state);
+
 	pch_post_disable_crt(encoder, old_crtc_state, old_conn_state);
 
 	lpt_disable_pch_transcoder(dev_priv);
@@ -268,6 +270,8 @@ static void hsw_pre_enable_crt(struct intel_encoder *encoder,
 	intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
 
 	dev_priv->display.fdi_link_train(crtc, crtc_state);
+
+	intel_ddi_enable_pipe_clock(crtc_state);
 }
 
 static void hsw_enable_crt(struct intel_encoder *encoder,
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 84c9b0766fed..bfa451ac9f09 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -2921,6 +2921,8 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
 		intel_dp_stop_link_train(intel_dp);
 
 	icl_enable_phy_clock_gating(dig_port);
+
+	intel_ddi_enable_pipe_clock(crtc_state);
 }
 
 static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder,
@@ -2959,6 +2961,8 @@ static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder,
 	intel_dig_port->set_infoframes(&encoder->base,
 				       crtc_state->has_infoframe,
 				       crtc_state, conn_state);
+
+	intel_ddi_enable_pipe_clock(crtc_state);
 }
 
 static void intel_ddi_pre_enable(struct intel_encoder *encoder,
@@ -3025,6 +3029,8 @@ static void intel_ddi_post_disable_dp(struct intel_encoder *encoder,
 	bool is_mst = intel_crtc_has_type(old_crtc_state,
 					  INTEL_OUTPUT_DP_MST);
 
+	intel_ddi_disable_pipe_clock(old_crtc_state);
+
 	/*
 	 * Power down sink before disabling the port, otherwise we end
 	 * up getting interrupts from the sink on detecting link loss.
@@ -3064,6 +3070,8 @@ static void intel_ddi_post_disable_hdmi(struct intel_encoder *encoder,
 	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
 	struct intel_hdmi *intel_hdmi = &dig_port->hdmi;
 
+	intel_ddi_disable_pipe_clock(old_crtc_state);
+
 	intel_disable_ddi_buf(encoder);
 
 	dig_port->set_infoframes(&encoder->base, false,
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d9170e514825..a846f891aaf9 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5646,9 +5646,6 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,
 
 	intel_encoders_pre_enable(crtc, pipe_config, old_state);
 
-	if (!transcoder_is_dsi(cpu_transcoder))
-		intel_ddi_enable_pipe_clock(pipe_config);
-
 	if (intel_crtc_has_dp_encoder(intel_crtc->config))
 		intel_dp_set_m_n(intel_crtc, M1_N1);
 
@@ -5835,9 +5832,6 @@ static void haswell_crtc_disable(struct intel_crtc_state *old_crtc_state,
 	else
 		ironlake_pfit_disable(intel_crtc, false);
 
-	if (!transcoder_is_dsi(cpu_transcoder))
-		intel_ddi_disable_pipe_clock(old_crtc_state);
-
 	intel_encoders_post_disable(crtc, old_crtc_state, old_state);
 
 	if (INTEL_GEN(dev_priv) >= 11)
-- 
2.13.2