[Intel-gfx] [PATCH] drm/i915/psr: Kill delays when activating psr back.
Souza, Jose
jose.souza at intel.com
Wed Jun 13 23:59:01 UTC 2018
On Wed, 2018-06-13 at 16:49 -0700, Dhinakaran Pandiyan wrote:
> On Wed, 2018-06-13 at 12:26 -0700, Rodrigo Vivi wrote:
> > The immediate enabling was actually not an issue for the
> > HW perspective for core platforms that have HW tracking.
> > HW will wait few identical idle frames before transitioning
> > to actual psr active anyways.
> >
> > Now that we removed VLV/CHV out of the picture completely
> > we can safely remove any delays.
> >
> > Note that this patch also remove the delayed activation
> > on HSW and BDW introduced by commit 'd0ac896a477d
> > ("drm/i915: Delay first PSR activation.")'. This was
> > introduced to fix a blank screen on VLV/CHV and also
> > masked some frozen screens on other core platforms.
> > Probably the same that we are now properly hunting and fixing.
> >
> > v2:(DK): Remove unnecessary WARN_ONs and make some other
> > VLV | CHV more readable.
> > v3: Do it regardless the timer rework.
> > v4: (DK/CI): Add VLV || CHV check on cancel work at psr_disable.
> > v5: Kill remaining items and fully rework activation functions.
> > v6: Rebase on top of VLV/CHV clean-up and keep the reactivation
> > on a regular non-delayed work to avoid extra delays on exit
> > calls and allow us to add few more safety checks before
> > real activation.
>
> We have to implement this bspec step in the disable sequence now that
> you are removing the delay -
> "Wait for SRD_STATUS to show SRD is Idle. This will take up to one
> full
> frame time (1/refresh rate), plus SRD exit training time (max of
> 6ms),
> plus SRD aux channel handshake (max of 1.5ms)."
>
> Otherwise, we can end up re-enabling right after a disable in
> psr_exit()
It is still waiting PSR idle before renable.
> >
>
>
> > Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
Reviewed-by: José Roberto de Souza <jose.souza at intel.com>
> > Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
> > ---
> > drivers/gpu/drm/i915/i915_debugfs.c | 2 --
> > drivers/gpu/drm/i915/i915_drv.h | 2 +-
> > drivers/gpu/drm/i915/intel_psr.c | 29 +++++++------------------
> > ----
> > 3 files changed, 8 insertions(+), 25 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
> > b/drivers/gpu/drm/i915/i915_debugfs.c
> > index 769ab9745834..948b973af067 100644
> > --- a/drivers/gpu/drm/i915/i915_debugfs.c
> > +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> > @@ -2660,8 +2660,6 @@ static int i915_edp_psr_status(struct
> > seq_file
> > *m, void *data)
> > seq_printf(m, "Enabled: %s\n", yesno((bool)dev_priv-
> > > psr.enabled));
> >
> > seq_printf(m, "Busy frontbuffer bits: 0x%03x\n",
> > dev_priv->psr.busy_frontbuffer_bits);
> > - seq_printf(m, "Re-enable work scheduled: %s\n",
> > - yesno(work_busy(&dev_priv->psr.work.work)));
> >
> > if (dev_priv->psr.psr2_enabled)
> > enabled = I915_READ(EDP_PSR2_CTL) &
> > EDP_PSR2_ENABLE;
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h
> > b/drivers/gpu/drm/i915/i915_drv.h
> > index be8c2f0823c4..19defe73b156 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -613,7 +613,7 @@ struct i915_psr {
> > bool sink_support;
> > struct intel_dp *enabled;
> > bool active;
> > - struct delayed_work work;
> > + struct work_struct work;
> > unsigned busy_frontbuffer_bits;
> > bool sink_psr2_support;
> > bool link_standby;
> > diff --git a/drivers/gpu/drm/i915/intel_psr.c
> > b/drivers/gpu/drm/i915/intel_psr.c
> > index 71dfe541740f..ef0f4741a95d 100644
> > --- a/drivers/gpu/drm/i915/intel_psr.c
> > +++ b/drivers/gpu/drm/i915/intel_psr.c
> > @@ -671,21 +671,7 @@ void intel_psr_enable(struct intel_dp
> > *intel_dp,
> > dev_priv->psr.enable_source(intel_dp, crtc_state);
> > dev_priv->psr.enabled = intel_dp;
> >
> > - if (INTEL_GEN(dev_priv) >= 9) {
> > - intel_psr_activate(intel_dp);
> > - } else {
> > - /*
> > - * FIXME: Activation should happen immediately
> > since
> > this
> > - * function is just called after pipe is fully
> > trained and
> > - * enabled.
> > - * However on some platforms we face issues when
> > first
> > - * activation follows a modeset so quickly.
> > - * - On HSW/BDW we get a recoverable frozen
> > screen until
> > - * next exit-activate sequence.
> > - */
> > - schedule_delayed_work(&dev_priv->psr.work,
> > - msecs_to_jiffies(intel_dp-
> > > panel_power_cycle_delay * 5));
> >
> > - }
> > + intel_psr_activate(intel_dp);
> >
> > unlock:
> > mutex_unlock(&dev_priv->psr.lock);
> > @@ -768,8 +754,6 @@ void intel_psr_disable(struct intel_dp
> > *intel_dp,
> >
> > dev_priv->psr.enabled = NULL;
> > mutex_unlock(&dev_priv->psr.lock);
> > -
> > - cancel_delayed_work_sync(&dev_priv->psr.work);
> > }
> >
> > static bool psr_wait_for_idle(struct drm_i915_private *dev_priv)
> > @@ -805,10 +789,13 @@ static bool psr_wait_for_idle(struct
> > drm_i915_private *dev_priv)
> > static void intel_psr_work(struct work_struct *work)
> > {
> > struct drm_i915_private *dev_priv =
> > - container_of(work, typeof(*dev_priv),
> > psr.work.work);
> > + container_of(work, typeof(*dev_priv), psr.work);
> >
> > mutex_lock(&dev_priv->psr.lock);
> >
> > + if (!dev_priv->psr.enabled)
> > + goto unlock;
> > +
>
> I thought flush_work() was missing in psr_disable(), but this check
> should take care of not enabling PSR after psr_disable()
>
>
> > /*
> > * We have to make sure PSR is ready for re-enable
> > * otherwise it keeps disabled until next full
> > enable/disable cycle.
> > @@ -949,9 +936,7 @@ void intel_psr_flush(struct drm_i915_private
> > *dev_priv,
> > }
> >
> > if (!dev_priv->psr.active && !dev_priv-
> > > psr.busy_frontbuffer_bits)
> >
> > - if (!work_busy(&dev_priv->psr.work.work))
> > - schedule_delayed_work(&dev_priv->psr.work,
> > - msecs_to_jiffies(100
> > ))
> > ;
> > + schedule_work(&dev_priv->psr.work);
> > mutex_unlock(&dev_priv->psr.lock);
> > }
> >
> > @@ -998,7 +983,7 @@ void intel_psr_init(struct drm_i915_private
> > *dev_priv)
> > dev_priv->psr.link_standby = false;
> > }
> >
> > - INIT_DELAYED_WORK(&dev_priv->psr.work, intel_psr_work);
> > + INIT_WORK(&dev_priv->psr.work, intel_psr_work);
> > mutex_init(&dev_priv->psr.lock);
> >
> > dev_priv->psr.enable_source = hsw_psr_enable_source;
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list