[Intel-gfx] [PATCH 06/20] drm/i915/icl: Power down unused DSI lanes
Madhav Chauhan
madhav.chauhan at intel.com
Fri Jun 15 10:21:10 UTC 2018
To save power, unused lanes should be powered
down using the bitfield of PORT_CL_DW10.
Signed-off-by: Madhav Chauhan <madhav.chauhan at intel.com>
---
drivers/gpu/drm/i915/intel_dsi_new.c | 44 ++++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_dsi_new.c b/drivers/gpu/drm/i915/intel_dsi_new.c
index 5ec4016..baaf46d 100644
--- a/drivers/gpu/drm/i915/intel_dsi_new.c
+++ b/drivers/gpu/drm/i915/intel_dsi_new.c
@@ -74,6 +74,47 @@ static void gen11_dsi_enable_io_power(struct intel_encoder *encoder)
intel_display_power_get(dev_priv, POWER_DOMAIN_PORT_DDI_B_IO);
}
+static void gen11_dsi_power_up_lanes(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+ u32 tmp;
+ u32 lane_mask;
+
+ switch (intel_dsi->lane_count) {
+ case 1:
+ lane_mask = PWR_DOWN_LN_3_1_0;
+ break;
+ case 2:
+ lane_mask = PWR_DOWN_LN_3_1;
+ break;
+ case 3:
+ lane_mask = PWR_DOWN_LN_3;
+ break;
+ case 4:
+ lane_mask = PWR_UP_ALL_LANES;
+ break;
+ default:
+ lane_mask = PWR_UP_ALL_LANES;
+ break;
+ }
+
+ lane_mask = lane_mask << PWR_DOWN_LN_SHIFT;
+
+ for_each_dsi_port(port, intel_dsi->ports) {
+ tmp = I915_READ(ICL_PORT_CL_DW10(port));
+ tmp &= ~PWR_DOWN_LN_MASK;
+ I915_WRITE(ICL_PORT_CL_DW10(port), tmp | lane_mask);
+ }
+}
+
+static void gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder)
+{
+ /* step 4a: power up all lanes of the DDI used by DSI */
+ gen11_dsi_power_up_lanes(encoder);
+}
+
static void __attribute__((unused)) gen11_dsi_pre_enable(
struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
@@ -84,4 +125,7 @@ static void __attribute__((unused)) gen11_dsi_pre_enable(
/* step3: enable DSI PLL */
gen11_dsi_program_esc_clk_div(encoder);
+
+ /* step4: enable DSI port and DPHY */
+ gen11_dsi_enable_port_and_phy(encoder);
}
--
2.7.4
More information about the Intel-gfx
mailing list