[Intel-gfx] [PATCH 1/2] drm/i915/icp: Add Interrupt Support

Paulo Zanoni paulo.r.zanoni at intel.com
Mon Jun 25 23:17:47 UTC 2018


Em Qua, 2018-06-20 às 14:36 -0700, Anusha Srivatsa escreveu:
> This patch addresses Interrupts from south display engine (SDE).
> 
> ICP has two registers - SHOTPLUG_CTL_DDI and SHOTPLUG_CTL_TC.
> Introduce these registers and their intended values.
> 
> Introduce icp_irq_handler().
> 
> v2:
> - remove redundant register defines.(Lucas)
> - Change register names to be more consistent with
> previous platforms (Lucas)
> 
> Cc: Lucas De Marchi <lucas.de.marchi at gmail.com>
> Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
> [Paulo: coding style bikesheds and rebases].
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
> ---
>  drivers/gpu/drm/i915/i915_irq.c | 134
> +++++++++++++++++++++++++++++++++++++++-
>  drivers/gpu/drm/i915/i915_reg.h |  40 ++++++++++++
>  2 files changed, 172 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_irq.c
> b/drivers/gpu/drm/i915/i915_irq.c
> index 46aaef5..7a7c4a2 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -122,6 +122,15 @@ static const u32 hpd_gen11[HPD_NUM_PINS] = {
>  	[HPD_PORT_F] = GEN11_TC4_HOTPLUG | GEN11_TBT4_HOTPLUG
>  };
>  
> +static const u32 hpd_icp[HPD_NUM_PINS] = {
> +	[HPD_PORT_A] = SDE_DDIA_HOTPLUG_ICP,
> +	[HPD_PORT_B] = SDE_DDIB_HOTPLUG_ICP,
> +	[HPD_PORT_C] = SDE_TC1_HOTPLUG_ICP,
> +	[HPD_PORT_D] = SDE_TC2_HOTPLUG_ICP,
> +	[HPD_PORT_E] = SDE_TC3_HOTPLUG_ICP,
> +	[HPD_PORT_F] = SDE_TC4_HOTPLUG_ICP
> +};
> +
>  /* IIR can theoretically queue up two events. Be paranoid. */
>  #define GEN8_IRQ_RESET_NDX(type, which) do { \
>  	I915_WRITE(GEN8_##type##_IMR(which), 0xffffffff); \
> @@ -1586,6 +1595,34 @@ static bool bxt_port_hotplug_long_detect(enum
> port port, u32 val)
>  	}
>  }
>  
> +static bool icp_ddi_port_hotplug_long_detect(enum port port, u32
> val)
> +{
> +	switch (port) {
> +	case PORT_A:
> +		return val & ICP_DDIA_HPD_LONG_DETECT;
> +	case PORT_B:
> +		return val & ICP_DDIB_HPD_LONG_DETECT;
> +	default:
> +		return false;
> +	}
> +}
> +
> +static bool icp_tc_port_hotplug_long_detect(enum port port, u32 val)
> +{
> +	switch (port) {
> +	case PORT_C:
> +		return val & ICP_TC_HPD_LONG_DETECT(PORT_TC1);
> +	case PORT_D:
> +		return val & ICP_TC_HPD_LONG_DETECT(PORT_TC2);
> +	case PORT_E:
> +		return val & ICP_TC_HPD_LONG_DETECT(PORT_TC3);
> +	case PORT_F:
> +		return val & ICP_TC_HPD_LONG_DETECT(PORT_TC4);
> +	default:
> +		return false;
> +	}
> +}
> +
>  static bool spt_port_hotplug2_long_detect(enum port port, u32 val)
>  {
>  	switch (port) {
> @@ -2385,6 +2422,43 @@ static void cpt_irq_handler(struct
> drm_i915_private *dev_priv, u32 pch_iir)
>  		cpt_serr_int_handler(dev_priv);
>  }
>  
> +static void icp_irq_handler(struct drm_i915_private *dev_priv, u32
> pch_iir)
> +{
> +	u32 ddi_hotplug_trigger = pch_iir & SDE_DDI_MASK_ICP;
> +	u32 tc_hotplug_trigger = pch_iir & SDE_TC_MASK_ICP;
> +	u32 pin_mask = 0, long_mask = 0;
> +
> +	if (ddi_hotplug_trigger) {
> +		u32 dig_hotplug_reg;
> +
> +		dig_hotplug_reg = I915_READ(SHOTPLUG_CTL_DDI);
> +		I915_WRITE(SHOTPLUG_CTL_DDI, dig_hotplug_reg);
> +
> +		intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask,
> +				   ddi_hotplug_trigger,
> +				   dig_hotplug_reg, hpd_icp,
> +				   icp_ddi_port_hotplug_long_detect)
> ;
> +	}
> +
> +	if (tc_hotplug_trigger) {
> +		u32 dig_hotplug_reg;
> +
> +		dig_hotplug_reg = I915_READ(SHOTPLUG_CTL_TC);
> +		I915_WRITE(SHOTPLUG_CTL_TC, dig_hotplug_reg);
> +
> +		intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask,
> +				   tc_hotplug_trigger,
> +				   dig_hotplug_reg, hpd_icp,
> +				   icp_tc_port_hotplug_long_detect);
> +	}
> +
> +	if (pin_mask)
> +		intel_hpd_irq_handler(dev_priv, pin_mask,
> long_mask);
> +
> +	if (pch_iir & SDE_GMBUS_ICP)
> +		gmbus_irq_handler(dev_priv);
> +}
> +
>  static void spt_irq_handler(struct drm_i915_private *dev_priv, u32
> pch_iir)
>  {
>  	u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_SPT &
> @@ -2804,8 +2878,11 @@ gen8_de_irq_handler(struct drm_i915_private
> *dev_priv, u32 master_ctl)
>  			I915_WRITE(SDEIIR, iir);
>  			ret = IRQ_HANDLED;
>  
> -			if (HAS_PCH_SPT(dev_priv) ||
> HAS_PCH_KBP(dev_priv) ||
> -			    HAS_PCH_CNP(dev_priv))
> +			if (HAS_PCH_ICP(dev_priv))
> +				icp_irq_handler(dev_priv, iir);
> +			else if (HAS_PCH_SPT(dev_priv) ||
> +				 HAS_PCH_KBP(dev_priv) ||
> +				 HAS_PCH_CNP(dev_priv))
>  				spt_irq_handler(dev_priv, iir);
>  			else
>  				cpt_irq_handler(dev_priv, iir);
> @@ -3584,6 +3661,9 @@ static void gen11_irq_reset(struct drm_device
> *dev)
>  	GEN3_IRQ_RESET(GEN11_DE_HPD_);
>  	GEN3_IRQ_RESET(GEN11_GU_MISC_);
>  	GEN3_IRQ_RESET(GEN8_PCU_);
> +
> +	if (HAS_PCH_ICP(dev_priv))
> +		GEN3_IRQ_RESET(SDE);
>  }
>  
>  void gen8_irq_power_well_post_enable(struct drm_i915_private
> *dev_priv,
> @@ -3700,6 +3780,35 @@ static void ibx_hpd_irq_setup(struct
> drm_i915_private *dev_priv)
>  	ibx_hpd_detection_setup(dev_priv);
>  }
>  
> +static void icp_hpd_detection_setup(struct drm_i915_private
> *dev_priv)
> +{
> +	u32 hotplug;
> +
> +	hotplug = I915_READ(SHOTPLUG_CTL_DDI);
> +	hotplug |= ICP_DDIA_HPD_ENABLE |
> +		   ICP_DDIB_HPD_ENABLE;
> +	I915_WRITE(SHOTPLUG_CTL_DDI, hotplug);
> +
> +	hotplug = I915_READ(SHOTPLUG_CTL_TC);
> +	hotplug |= ICP_TC_HPD_ENABLE(PORT_TC1) |
> +		   ICP_TC_HPD_ENABLE(PORT_TC2) |
> +		   ICP_TC_HPD_ENABLE(PORT_TC3) |
> +		   ICP_TC_HPD_ENABLE(PORT_TC4);
> +	I915_WRITE(SHOTPLUG_CTL_TC, hotplug);
> +}
> +
> +static void icp_hpd_irq_setup(struct drm_i915_private *dev_priv)
> +{
> +	u32 hotplug_irqs, enabled_irqs;
> +
> +	hotplug_irqs = SDE_DDI_MASK_ICP | SDE_TC_MASK_ICP;
> +	enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_icp);
> +
> +	ibx_display_interrupt_update(dev_priv, hotplug_irqs,
> enabled_irqs);
> +
> +	icp_hpd_detection_setup(dev_priv);
> +}
> +
>  static void gen11_hpd_detection_setup(struct drm_i915_private
> *dev_priv)
>  {
>  	u32 hotplug;
> @@ -3733,6 +3842,9 @@ static void gen11_hpd_irq_setup(struct
> drm_i915_private *dev_priv)
>  	POSTING_READ(GEN11_DE_HPD_IMR);
>  
>  	gen11_hpd_detection_setup(dev_priv);
> +
> +	if (HAS_PCH_ICP(dev_priv))
> +		icp_hpd_irq_setup(dev_priv);
>  }
>  
>  static void spt_hpd_detection_setup(struct drm_i915_private
> *dev_priv)
> @@ -4168,11 +4280,29 @@ static void gen11_gt_irq_postinstall(struct
> drm_i915_private *dev_priv)
>  	I915_WRITE(GEN11_GPM_WGBOXPERF_INTR_MASK,  ~0);
>  }
>  
> +static void icp_irq_postinstall(struct drm_device *dev)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(dev);
> +	u32 mask = SDE_GMBUS_ICP;
> +
> +	WARN_ON(I915_READ(SDEIER) != 0);
> +	I915_WRITE(SDEIER, 0xffffffff);
> +	POSTING_READ(SDEIER);
> +
> +	gen3_assert_iir_is_zero(dev_priv, SDEIIR);
> +	I915_WRITE(SDEIMR, ~mask);
> +
> +	icp_hpd_detection_setup(dev_priv);

Having a sentence/paragraph on the commit message explaining why we can
afford to do this instead of going the ibx_irq_pre_postinstall()
followed by ibx_irq_postinstall() done by the previous platforms would
help.

My understanding is that this is OK, but a confirmation would always be
fine.


> +}
> +
>  static int gen11_irq_postinstall(struct drm_device *dev)
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	u32 gu_misc_masked = GEN11_GU_MISC_GSE;
>  
> +	if (HAS_PCH_ICP(dev_priv))
> +		icp_irq_postinstall(dev);
> +
>  	gen11_gt_irq_postinstall(dev_priv);
>  	gen8_de_irq_postinstall(dev_priv);
>  
> diff --git a/drivers/gpu/drm/i915/i915_reg.h
> b/drivers/gpu/drm/i915/i915_reg.h
> index 4bfd7a9..e347055 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -7517,6 +7517,46 @@ enum {
>  #define  PORTE_HOTPLUG_SHORT_DETECT	(1 << 0)
>  #define  PORTE_HOTPLUG_LONG_DETECT	(2 << 0)
>  
> +/* ICP */
> +#define   SDE_TC4_HOTPLUG_ICP		(1 << 27)
> +#define   SDE_TC3_HOTPLUG_ICP		(1 << 26)
> +#define   SDE_TC2_HOTPLUG_ICP		(1 << 25)
> +#define   SDE_TC1_HOTPLUG_ICP		(1 << 24)
> +#define   SDE_GMBUS_ICP			(1 << 23)
> +#define   SDE_DDIB_HOTPLUG_ICP		(1 << 17)
> +#define   SDE_DDIA_HOTPLUG_ICP		(1 << 16)
> +
> +#define SDE_DDI_MASK_ICP		(SDE_DDIB_HOTPLUG_ICP |	
> \
> +					 SDE_DDIA_HOTPLUG_ICP)
> +
> +#define SDE_TC_MASK_ICP			(SDE_TC4_HOTPLUG_ICP
> |	\
> +					 SDE_TC3_HOTPLUG_ICP |	
> \
> +					 SDE_TC2_HOTPLUG_ICP |	
> \
> +					 SDE_TC1_HOTPLUG_ICP)

Now these definitions are right below PCH_PORT_HOTPLUG2, but these bits
are not for that register. Please move the definitions to the place
that has the other SDE definitions. Also please change that /* ICP */
comment to match the style used by the other PCHs: /* south display
engine interrupt: ICP */ (also possibly fixing the "CPT/PPT" comment to
"CPT - CNP" or something like that.


> +
> +/* This register is a reuse of PCH_PORT_HOTPLUG register. The Spec
> + * has the name SHOTPLUG_CTL_DDI for ICP. Let us stick to the Spec.

I think the best way to describe would be to say that what was
previously done by a single register (PCH_PORT_HOTPLUG) is now done by
two registers, one for DDI and the other for TC, and that's why we have
brand new definitions.

Otherwise, looks good.

Thanks,
Paulo

> + */
> +
> +#define SHOTPLUG_CTL_DDI			_MMIO(0xc4030)
> +#define   ICP_DDIB_HPD_ENABLE			(1 << 7)
> +#define   ICP_DDIB_HPD_STATUS_MASK		(3 << 4)
> +#define   ICP_DDIB_HPD_NO_DETECT		(0 << 4)
> +#define   ICP_DDIB_HPD_SHORT_DETECT		(1 << 4)
> +#define   ICP_DDIB_HPD_LONG_DETECT		(2 << 4)
> +#define   ICP_DDIB_HPD_SHORT_LONG_DETECT	(3 << 4)
> +#define   ICP_DDIA_HPD_ENABLE			(1 << 3)
> +#define   ICP_DDIA_HPD_STATUS_MASK		(3 << 0)
> +#define   ICP_DDIA_HPD_NO_DETECT		(0 << 0)
> +#define   ICP_DDIA_HPD_SHORT_DETECT		(1 << 0)
> +#define   ICP_DDIA_HPD_LONG_DETECT		(2 << 0)
> +#define   ICP_DDIA_HPD_SHORT_LONG_DETECT	(3 << 0)
> +
> +#define SHOTPLUG_CTL_TC				_MMIO(0xc4034
> )
> +#define   ICP_TC_HPD_ENABLE(tc_port)		(8 << (tc_port)
> * 4)
> +#define   ICP_TC_HPD_LONG_DETECT(tc_port)	(2 << (tc_port) *
> 4)
> +#define   ICP_TC_HPD_SHORT_DETECT(tc_port)	(1 << (tc_port) *
> 4)
> +
>  #define PCH_GPIOA               _MMIO(0xc5010)
>  #define PCH_GPIOB               _MMIO(0xc5014)
>  #define PCH_GPIOC               _MMIO(0xc5018)


More information about the Intel-gfx mailing list