[Intel-gfx] [v6 2/2] drm/i915/icl: Enable Plane Input CSC for YUV to RGB Conversion
Ville Syrjälä
ville.syrjala at linux.intel.com
Thu Nov 1 09:44:15 UTC 2018
On Thu, Nov 01, 2018 at 06:22:08AM +0000, Shankar, Uma wrote:
>
>
> >-----Original Message-----
> >From: Ville Syrjälä [mailto:ville.syrjala at linux.intel.com]
> >Sent: Wednesday, October 31, 2018 7:36 PM
> >To: Shankar, Uma <uma.shankar at intel.com>
> >Cc: intel-gfx at lists.freedesktop.org; Syrjala, Ville <ville.syrjala at intel.com>;
> >Lankhorst, Maarten <maarten.lankhorst at intel.com>
> >Subject: Re: [Intel-gfx] [v6 2/2] drm/i915/icl: Enable Plane Input CSC for YUV to
> >RGB Conversion
> >
> >On Wed, Oct 31, 2018 at 07:05:31PM +0530, Uma Shankar wrote:
> >> Plane input CSC needs to be enabled to convert frambuffers from YUV to
> >> RGB. This is needed for bottom 3 planes on ICL, rest of the planes
> >> have hardcoded conversion and taken care by the legacy code.
> >>
> >> This patch defines the co-efficient values for YUV to RGB conversion
> >> in BT709 and BT601 formats. It programs the coefficients and enables
> >> the plane input csc unit in hardware.
> >>
> >> This has been verified and tested by Maarten and the change is working
> >> as expected.
> >>
> >> v2: Addressed Maarten's and Ville's review comments and added the
> >> coefficients in a 2D array instead of independent Macros.
> >>
> >> v3: Added individual coefficient matrix (9 values) instead of 6
> >> register values as per Maarten's comment. Also addresed a shift issue
> >> with B channel coefficient.
> >>
> >> v4: Added support for Limited Range Color Handling
> >>
> >> v5: Fixed Matt and Maarten's review comments.
> >>
> >> v6: Added human readable matrix values for YUV to RGB Conversion along
> >> with just the bspec register values, as per Matt's suggestion.
> >>
> >> Signed-off-by: Uma Shankar <uma.shankar at intel.com>
> >> ---
> >> drivers/gpu/drm/i915/intel_color.c | 103
> >+++++++++++++++++++++++++++++++++++
> >> drivers/gpu/drm/i915/intel_display.c | 23 ++++++--
> >> drivers/gpu/drm/i915/intel_drv.h | 2 +
> >> 3 files changed, 122 insertions(+), 6 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/i915/intel_color.c
> >> b/drivers/gpu/drm/i915/intel_color.c
> >> index 5127da2..6dc9075 100644
> >> --- a/drivers/gpu/drm/i915/intel_color.c
> >> +++ b/drivers/gpu/drm/i915/intel_color.c
> >> @@ -57,6 +57,15 @@
> >> #define CSC_RGB_TO_YUV_RV_GV 0xbce89ad8 #define
> >CSC_RGB_TO_YUV_BV
> >> 0x1e080000
> >>
> >> +#define ROFF(x) (((x) & 0xffff) << 16)
> >> +#define GOFF(x) (((x) & 0xffff) << 0)
> >> +#define BOFF(x) (((x) & 0xffff) << 16)
> >> +
> >> +/* Preoffset values for YUV to RGB Conversion */
> >> +#define PREOFF_YUV_TO_RGB_HI 0x1800
> >> +#define PREOFF_YUV_TO_RGB_ME 0x1F00
> >> +#define PREOFF_YUV_TO_RGB_LO 0x1800
> >> +
> >> /*
> >> * Extract the CSC coefficient from a CTM coefficient (in U32.32 fixed point
> >> * format). This macro takes the coefficient we want transformed and
> >> the @@ -643,6 +652,100 @@ int intel_color_check(struct drm_crtc *crtc,
> >> return -EINVAL;
> >> }
> >>
> >> +void icl_program_input_csc_coeff(const struct intel_crtc_state *crtc_state,
> >> + const struct intel_plane_state *plane_state) {
> >> + struct drm_i915_private *dev_priv =
> >> + to_i915(plane_state->base.plane->dev);
> >> + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> >> + enum pipe pipe = crtc->pipe;
> >> + struct intel_plane *intel_plane =
> >> + to_intel_plane(plane_state->base.plane);
> >> + enum plane_id plane = intel_plane->id;
> >> +
> >> + static const u16 input_csc_matrix[][9] = {
> >> + /*
> >> + * BT.601 full range YCbCr -> full range RGB
> >> + * The matrix required is :
> >> + * [1.000, 0.000, 1.371,
> >> + * 1.000, -0.336, -0.698,
> >> + * 1.000, 1.732, 0.0000]
> >> + */
> >> + [DRM_COLOR_YCBCR_BT601] = {
> >> + 0x7AF8, 0x7800, 0x0,
> >> + 0x8B28, 0x7800, 0x9AC0,
> >> + 0x0, 0x7800, 0x7DD8,
> >> + },
> >> + /*
> >> + * BT.709 full range YCbCr -> full range RGB
> >> + * The matrix required is :
> >> + * [1.000, 0.000, 1.574,
> >> + * 1.000, -0.187, -0.468,
> >> + * 1.000, 1.855, 0.0000]
> >> + */
> >> + [DRM_COLOR_YCBCR_BT709] = {
> >> + 0x7C98, 0x7800, 0x0,
> >> + 0x9EF8, 0x7800, 0xABF8,
> >> + 0x0, 0x7800, 0x7ED8,
> >> + },
> >> + };
> >> +
> >> + /* Matrix for Limited Range to Full Range Conversion */
> >> + static const u16 input_csc_matrix_lr[][9] = {
> >> + /*
> >> + * BT.601 Limted range YCbCr -> full range RGB
> >> + * The matrix required is :
> >> + * [1.164384, 0.000, 1.596370,
> >> + * 1.138393, -0.382500, -0.794598,
> >> + * 1.138393, 1.971696, 0.0000]
> >> + */
> >> + [DRM_COLOR_YCBCR_BT601] = {
> >> + 0x7CC8, 0x7950, 0x0,
> >> + 0x8CB8, 0x7918, 0x9C40,
> >> + 0x0, 0x7918, 0x7FC8,
> >> + },
> >> + /*
> >> + * BT.709 Limited range YCbCr -> full range RGB
> >> + * The matrix required is :
> >> + * [1.164, 0.000, 1.833671,
> >> + * 1.138393, -0.213249, -0.532909,
> >> + * 1.138393, 2.112402, 0.0000]
> >> + */
> >> + [DRM_COLOR_YCBCR_BT709] = {
> >> + 0x7EA8, 0x7950, 0x0,
> >> + 0x8888, 0x7918, 0xADA8,
> >> + 0x0, 0x7918, 0x6870,
> >> + },
> >> + };
> >> + const u16 *csc;
> >> +
> >> + if (plane_state->base.color_range ==
> >DRM_COLOR_YCBCR_FULL_RANGE)
> >> + csc = input_csc_matrix[plane_state->base.color_encoding];
> >> + else
> >> + csc = input_csc_matrix_lr[plane_state->base.color_encoding];
> >> +
> >> + I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 0), ROFF(csc[0]) |
> >> + GOFF(csc[1]));
> >> + I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 1), BOFF(csc[2]));
> >> + I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 2), ROFF(csc[3]) |
> >> + GOFF(csc[4]));
> >> + I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 3), BOFF(csc[5]));
> >> + I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 4), ROFF(csc[6]) |
> >> + GOFF(csc[7]));
> >> + I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 5), BOFF(csc[8]));
> >> +
> >> + I915_WRITE(PLANE_INPUT_CSC_PREOFF(pipe, plane, 0),
> >> + PREOFF_YUV_TO_RGB_HI);
> >> + I915_WRITE(PLANE_INPUT_CSC_PREOFF(pipe, plane, 1),
> >> + PREOFF_YUV_TO_RGB_ME);
> >> + I915_WRITE(PLANE_INPUT_CSC_PREOFF(pipe, plane, 2),
> >> + PREOFF_YUV_TO_RGB_LO);
> >> +
> >> + I915_WRITE(PLANE_INPUT_CSC_POSTOFF(pipe, plane, 0), 0x0);
> >> + I915_WRITE(PLANE_INPUT_CSC_POSTOFF(pipe, plane, 1), 0x0);
> >> + I915_WRITE(PLANE_INPUT_CSC_POSTOFF(pipe, plane, 2), 0x0); }
> >
> >Oh and please move this function into intel_sprite.c. That way it can be static.
>
> We were trying to consolidate all the color stuff and the helper functions in
> intel_color.c.
I prefer organizing based on hardware block. If there is other use for
the same matrices and whatnot those can of course be put into
intel_color.c, but the plane programming stuff should be in the plane
code IMO.
> Since its currently called from one place, it can be made static.
> Will update the patch. Thanks.
>
> >> +
> >> void intel_color_init(struct drm_crtc *crtc) {
> >> struct drm_i915_private *dev_priv = to_i915(crtc->dev); diff --git
> >> a/drivers/gpu/drm/i915/intel_display.c
> >> b/drivers/gpu/drm/i915/intel_display.c
> >> index fe045ab..d16a064 100644
> >> --- a/drivers/gpu/drm/i915/intel_display.c
> >> +++ b/drivers/gpu/drm/i915/intel_display.c
> >> @@ -3666,6 +3666,7 @@ u32 glk_plane_color_ctl(const struct intel_crtc_state
> >*crtc_state,
> >> struct drm_i915_private *dev_priv =
> >> to_i915(plane_state->base.plane->dev);
> >> const struct drm_framebuffer *fb = plane_state->base.fb;
> >> + struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
> >> u32 plane_color_ctl = 0;
> >>
> >> if (INTEL_GEN(dev_priv) < 11) {
> >> @@ -3676,13 +3677,23 @@ u32 glk_plane_color_ctl(const struct
> >intel_crtc_state *crtc_state,
> >> plane_color_ctl |= glk_plane_color_ctl_alpha(plane_state);
> >>
> >> if (fb->format->is_yuv) {
> >> - if (plane_state->base.color_encoding ==
> >DRM_COLOR_YCBCR_BT709)
> >> - plane_color_ctl |=
> >PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709;
> >> - else
> >> - plane_color_ctl |=
> >PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709;
> >> + if (!icl_is_hdr_plane(plane)) {
> >> + if (plane_state->base.color_encoding ==
> >> + DRM_COLOR_YCBCR_BT709)
> >> + plane_color_ctl |=
> >> +
> > PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709;
> >> + else
> >> + plane_color_ctl |=
> >> +
> > PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709;
> >>
> >> - if (plane_state->base.color_range ==
> >DRM_COLOR_YCBCR_FULL_RANGE)
> >> - plane_color_ctl |=
> >PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;
> >> + if (plane_state->base.color_range ==
> >> + DRM_COLOR_YCBCR_FULL_RANGE)
> >> + plane_color_ctl |=
> >> +
> > PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;
> >> + } else {
> >> + icl_program_input_csc_coeff(crtc_state, plane_state);
> >> + plane_color_ctl |= PLANE_COLOR_INPUT_CSC_ENABLE;
> >> + }
> >> }
> >>
> >> return plane_color_ctl;
> >> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> >> b/drivers/gpu/drm/i915/intel_drv.h
> >> index db24308..bd9e946 100644
> >> --- a/drivers/gpu/drm/i915/intel_drv.h
> >> +++ b/drivers/gpu/drm/i915/intel_drv.h
> >> @@ -2285,6 +2285,8 @@ int intel_plane_atomic_check_with_state(const
> >> struct intel_crtc_state *old_crtc_ int intel_color_check(struct
> >> drm_crtc *crtc, struct drm_crtc_state *state); void
> >> intel_color_set_csc(struct drm_crtc_state *crtc_state); void
> >> intel_color_load_luts(struct drm_crtc_state *crtc_state);
> >> +void icl_program_input_csc_coeff(const struct intel_crtc_state *crtc_state,
> >> + const struct intel_plane_state *plane_state);
> >>
> >> /* intel_lspcon.c */
> >> bool lspcon_init(struct intel_digital_port *intel_dig_port);
> >> --
> >> 1.9.1
> >>
> >> _______________________________________________
> >> Intel-gfx mailing list
> >> Intel-gfx at lists.freedesktop.org
> >> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> >
> >--
> >Ville Syrjälä
> >Intel
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list