[Intel-gfx] [PATCH 06/14] drm/i915: Reorganize plane register writes to make them more atomic
Ville Syrjala
ville.syrjala at linux.intel.com
Thu Nov 1 15:05:57 UTC 2018
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Some observations about the plane registers:
- the control register will self-arm if the plane is not already
enabled, thus we want to write it as close to (or ideally after)
the surface register
- tileoff/linoff/offset/aux_offset are self-arming as well so we want
them close to the surface register as well
- color keying registers we maybe self arming before SKL. Not 100%
sure but we can try to keep them near to the surface register
as well
- chv pipe b csc register are double buffered but self arming so
moving them down a bit
- the rest should be mostly armed by the surface register so we can
safely write them first, and to just for some consistency let's try
to follow keep them in order based on the register offset
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 40 +++++-----
drivers/gpu/drm/i915/intel_sprite.c | 114 +++++++++++++++------------
2 files changed, 86 insertions(+), 68 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c5ce3892d583..9521cff5fb44 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3328,7 +3328,6 @@ static void i9xx_update_plane(struct intel_plane *plane,
enum i9xx_plane_id i9xx_plane = plane->i9xx_plane;
u32 linear_offset;
u32 dspcntr = plane_state->ctl;
- i915_reg_t reg = DSPCNTR(i9xx_plane);
int x = plane_state->color_plane[0].x;
int y = plane_state->color_plane[0].y;
unsigned long irqflags;
@@ -3343,41 +3342,45 @@ static void i9xx_update_plane(struct intel_plane *plane,
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
+ I915_WRITE_FW(DSPSTRIDE(i9xx_plane), plane_state->color_plane[0].stride);
+
if (INTEL_GEN(dev_priv) < 4) {
/* pipesrc and dspsize control the size that is scaled from,
* which should always be the user's requested size.
*/
+ I915_WRITE_FW(DSPPOS(i9xx_plane), 0);
I915_WRITE_FW(DSPSIZE(i9xx_plane),
((crtc_state->pipe_src_h - 1) << 16) |
(crtc_state->pipe_src_w - 1));
- I915_WRITE_FW(DSPPOS(i9xx_plane), 0);
} else if (IS_CHERRYVIEW(dev_priv) && i9xx_plane == PLANE_B) {
+ I915_WRITE_FW(PRIMPOS(i9xx_plane), 0);
I915_WRITE_FW(PRIMSIZE(i9xx_plane),
((crtc_state->pipe_src_h - 1) << 16) |
(crtc_state->pipe_src_w - 1));
- I915_WRITE_FW(PRIMPOS(i9xx_plane), 0);
I915_WRITE_FW(PRIMCNSTALPHA(i9xx_plane), 0);
}
- I915_WRITE_FW(reg, dspcntr);
-
- I915_WRITE_FW(DSPSTRIDE(i9xx_plane), plane_state->color_plane[0].stride);
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
- I915_WRITE_FW(DSPSURF(i9xx_plane),
- intel_plane_ggtt_offset(plane_state) +
- dspaddr_offset);
I915_WRITE_FW(DSPOFFSET(i9xx_plane), (y << 16) | x);
} else if (INTEL_GEN(dev_priv) >= 4) {
+ I915_WRITE_FW(DSPTILEOFF(i9xx_plane), (y << 16) | x);
+ I915_WRITE_FW(DSPLINOFF(i9xx_plane), linear_offset);
+ }
+
+ /*
+ * The control register self-arms if the plane was previously
+ * disabled. Try to make the plane enable atomic by writing
+ * the control register just before the surface register.
+ */
+ I915_WRITE_FW(DSPCNTR(i9xx_plane), dspcntr);
+ if (INTEL_GEN(dev_priv) >= 4)
I915_WRITE_FW(DSPSURF(i9xx_plane),
intel_plane_ggtt_offset(plane_state) +
dspaddr_offset);
- I915_WRITE_FW(DSPTILEOFF(i9xx_plane), (y << 16) | x);
- I915_WRITE_FW(DSPLINOFF(i9xx_plane), linear_offset);
- } else {
+ else
I915_WRITE_FW(DSPADDR(i9xx_plane),
intel_plane_ggtt_offset(plane_state) +
dspaddr_offset);
- }
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
}
@@ -10045,8 +10048,8 @@ static void i9xx_update_cursor(struct intel_plane *plane,
* On some platforms writing CURCNTR first will also
* cause CURPOS to be armed by the CURBASE write.
* Without the CURCNTR write the CURPOS write would
- * arm itself. Thus we always start the full update
- * with a CURCNTR write.
+ * arm itself. Thus we always update CURCNTR before
+ * CURPOS.
*
* On other platforms CURPOS always requires the
* CURBASE write to arm the update. Additonally
@@ -10056,15 +10059,16 @@ static void i9xx_update_cursor(struct intel_plane *plane,
* cursor that doesn't appear to move, or even change
* shape. Thus we always write CURBASE.
*
- * CURCNTR and CUR_FBC_CTL are always
- * armed by the CURBASE write only.
+ * The other registers are armed by by the CURBASE write
+ * except when the plane is getting enabled at which time
+ * the CURCNTR write arms the update.
*/
if (plane->cursor.base != base ||
plane->cursor.size != fbc_ctl ||
plane->cursor.cntl != cntl) {
- I915_WRITE_FW(CURCNTR(pipe), cntl);
if (HAS_CUR_FBC(dev_priv))
I915_WRITE_FW(CUR_FBC_CTL(pipe), fbc_ctl);
+ I915_WRITE_FW(CURCNTR(pipe), cntl);
I915_WRITE_FW(CURPOS(pipe), pos);
I915_WRITE_FW(CURBASE(pipe), base);
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 8a40879abe30..455b2d0cbaa6 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -404,24 +404,12 @@ skl_program_plane(struct intel_plane *plane,
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
- if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
- I915_WRITE_FW(PLANE_COLOR_CTL(pipe, plane_id),
- plane_state->color_ctl);
-
- I915_WRITE_FW(PLANE_KEYVAL(pipe, plane_id), key->min_value);
- I915_WRITE_FW(PLANE_KEYMAX(pipe, plane_id), keymax);
- I915_WRITE_FW(PLANE_KEYMSK(pipe, plane_id), keymsk);
-
- I915_WRITE_FW(PLANE_OFFSET(pipe, plane_id), (y << 16) | x);
I915_WRITE_FW(PLANE_STRIDE(pipe, plane_id), stride);
+ I915_WRITE_FW(PLANE_POS(pipe, plane_id), (crtc_y << 16) | crtc_x);
I915_WRITE_FW(PLANE_SIZE(pipe, plane_id), (src_h << 16) | src_w);
I915_WRITE_FW(PLANE_AUX_DIST(pipe, plane_id),
- (plane_state->color_plane[1].offset - surf_addr) | aux_stride);
-
- if (INTEL_GEN(dev_priv) < 11)
- I915_WRITE_FW(PLANE_AUX_OFFSET(pipe, plane_id),
- (plane_state->color_plane[1].y << 16) |
- plane_state->color_plane[1].x);
+ (plane_state->color_plane[1].offset - surf_addr) |
+ aux_stride);
if (icl_is_hdr_plane(plane)) {
u32 cus_ctl = 0;
@@ -444,15 +432,33 @@ skl_program_plane(struct intel_plane *plane,
I915_WRITE_FW(PLANE_CUS_CTL(pipe, plane_id), cus_ctl);
}
- if (!slave && plane_state->scaler_id >= 0)
- skl_program_scaler(plane, crtc_state, plane_state);
+ if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
+ I915_WRITE_FW(PLANE_COLOR_CTL(pipe, plane_id),
+ plane_state->color_ctl);
- I915_WRITE_FW(PLANE_POS(pipe, plane_id), (crtc_y << 16) | crtc_x);
+ I915_WRITE_FW(PLANE_KEYVAL(pipe, plane_id), key->min_value);
+ I915_WRITE_FW(PLANE_KEYMAX(pipe, plane_id), keymax);
+ I915_WRITE_FW(PLANE_KEYMSK(pipe, plane_id), keymsk);
+
+ I915_WRITE_FW(PLANE_OFFSET(pipe, plane_id), (y << 16) | x);
+ if (INTEL_GEN(dev_priv) < 11)
+ I915_WRITE_FW(PLANE_AUX_OFFSET(pipe, plane_id),
+ (plane_state->color_plane[1].y << 16) |
+ plane_state->color_plane[1].x);
+
+ /*
+ * The control register self-arms if the plane was previously
+ * disabled. Try to make the plane enable atomic by writing
+ * the control register just before the surface register.
+ */
I915_WRITE_FW(PLANE_CTL(pipe, plane_id), plane_ctl);
I915_WRITE_FW(PLANE_SURF(pipe, plane_id),
intel_plane_ggtt_offset(plane_state) + surf_addr);
+ if (!slave && plane_state->scaler_id >= 0)
+ skl_program_scaler(plane, crtc_state, plane_state);
+
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
}
@@ -690,7 +696,6 @@ vlv_update_plane(struct intel_plane *plane,
const struct intel_plane_state *plane_state)
{
struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
- const struct drm_framebuffer *fb = plane_state->base.fb;
enum pipe pipe = plane->pipe;
enum plane_id plane_id = plane->id;
u32 sprctl = plane_state->ctl;
@@ -715,6 +720,12 @@ vlv_update_plane(struct intel_plane *plane,
vlv_update_clrc(plane_state);
+ I915_WRITE_FW(SPSTRIDE(pipe, plane_id),
+ plane_state->color_plane[0].stride);
+ I915_WRITE_FW(SPPOS(pipe, plane_id), (crtc_y << 16) | crtc_x);
+ I915_WRITE_FW(SPSIZE(pipe, plane_id), (crtc_h << 16) | crtc_w);
+ I915_WRITE_FW(SPCONSTALPHA(pipe, plane_id), 0);
+
if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_B)
chv_update_csc(plane_state);
@@ -723,18 +734,15 @@ vlv_update_plane(struct intel_plane *plane,
I915_WRITE_FW(SPKEYMAXVAL(pipe, plane_id), key->max_value);
I915_WRITE_FW(SPKEYMSK(pipe, plane_id), key->channel_mask);
}
- I915_WRITE_FW(SPSTRIDE(pipe, plane_id),
- plane_state->color_plane[0].stride);
- I915_WRITE_FW(SPPOS(pipe, plane_id), (crtc_y << 16) | crtc_x);
-
- if (fb->modifier == I915_FORMAT_MOD_X_TILED)
- I915_WRITE_FW(SPTILEOFF(pipe, plane_id), (y << 16) | x);
- else
- I915_WRITE_FW(SPLINOFF(pipe, plane_id), linear_offset);
- I915_WRITE_FW(SPCONSTALPHA(pipe, plane_id), 0);
+ I915_WRITE_FW(SPTILEOFF(pipe, plane_id), (y << 16) | x);
+ I915_WRITE_FW(SPLINOFF(pipe, plane_id), linear_offset);
- I915_WRITE_FW(SPSIZE(pipe, plane_id), (crtc_h << 16) | crtc_w);
+ /*
+ * The control register self-arms if the plane was previously
+ * disabled. Try to make the plane enable atomic by writing
+ * the control register just before the surface register.
+ */
I915_WRITE_FW(SPCNTR(pipe, plane_id), sprctl);
I915_WRITE_FW(SPSURF(pipe, plane_id),
intel_plane_ggtt_offset(plane_state) + sprsurf_offset);
@@ -848,7 +856,6 @@ ivb_update_plane(struct intel_plane *plane,
const struct intel_plane_state *plane_state)
{
struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
- const struct drm_framebuffer *fb = plane_state->base.fb;
enum pipe pipe = plane->pipe;
u32 sprctl = plane_state->ctl, sprscale = 0;
u32 sprsurf_offset = plane_state->color_plane[0].offset;
@@ -877,27 +884,32 @@ ivb_update_plane(struct intel_plane *plane,
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
+ I915_WRITE_FW(SPRSTRIDE(pipe), plane_state->color_plane[0].stride);
+ I915_WRITE_FW(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
+ I915_WRITE_FW(SPRSIZE(pipe), (crtc_h << 16) | crtc_w);
+ if (IS_IVYBRIDGE(dev_priv))
+ I915_WRITE_FW(SPRSCALE(pipe), sprscale);
+
if (key->flags) {
I915_WRITE_FW(SPRKEYVAL(pipe), key->min_value);
I915_WRITE_FW(SPRKEYMAX(pipe), key->max_value);
I915_WRITE_FW(SPRKEYMSK(pipe), key->channel_mask);
}
- I915_WRITE_FW(SPRSTRIDE(pipe), plane_state->color_plane[0].stride);
- I915_WRITE_FW(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
-
/* HSW consolidates SPRTILEOFF and SPRLINOFF into a single SPROFFSET
* register */
- if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
+ if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
I915_WRITE_FW(SPROFFSET(pipe), (y << 16) | x);
- else if (fb->modifier == I915_FORMAT_MOD_X_TILED)
+ } else {
I915_WRITE_FW(SPRTILEOFF(pipe), (y << 16) | x);
- else
I915_WRITE_FW(SPRLINOFF(pipe), linear_offset);
+ }
- I915_WRITE_FW(SPRSIZE(pipe), (crtc_h << 16) | crtc_w);
- if (IS_IVYBRIDGE(dev_priv))
- I915_WRITE_FW(SPRSCALE(pipe), sprscale);
+ /*
+ * The control register self-arms if the plane was previously
+ * disabled. Try to make the plane enable atomic by writing
+ * the control register just before the surface register.
+ */
I915_WRITE_FW(SPRCTL(pipe), sprctl);
I915_WRITE_FW(SPRSURF(pipe),
intel_plane_ggtt_offset(plane_state) + sprsurf_offset);
@@ -915,7 +927,7 @@ ivb_disable_plane(struct intel_plane *plane, struct intel_crtc *crtc)
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
I915_WRITE_FW(SPRCTL(pipe), 0);
- /* Can't leave the scaler enabled... */
+ /* Disable the scaler */
if (IS_IVYBRIDGE(dev_priv))
I915_WRITE_FW(SPRSCALE(pipe), 0);
I915_WRITE_FW(SPRSURF(pipe), 0);
@@ -1017,7 +1029,6 @@ g4x_update_plane(struct intel_plane *plane,
const struct intel_plane_state *plane_state)
{
struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
- const struct drm_framebuffer *fb = plane_state->base.fb;
enum pipe pipe = plane->pipe;
u32 dvscntr = plane_state->ctl, dvsscale = 0;
u32 dvssurf_offset = plane_state->color_plane[0].offset;
@@ -1046,22 +1057,25 @@ g4x_update_plane(struct intel_plane *plane,
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
+ I915_WRITE_FW(DVSSTRIDE(pipe), plane_state->color_plane[0].stride);
+ I915_WRITE_FW(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
+ I915_WRITE_FW(DVSSIZE(pipe), (crtc_h << 16) | crtc_w);
+ I915_WRITE_FW(DVSSCALE(pipe), dvsscale);
+
if (key->flags) {
I915_WRITE_FW(DVSKEYVAL(pipe), key->min_value);
I915_WRITE_FW(DVSKEYMAX(pipe), key->max_value);
I915_WRITE_FW(DVSKEYMSK(pipe), key->channel_mask);
}
- I915_WRITE_FW(DVSSTRIDE(pipe), plane_state->color_plane[0].stride);
- I915_WRITE_FW(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
-
- if (fb->modifier == I915_FORMAT_MOD_X_TILED)
- I915_WRITE_FW(DVSTILEOFF(pipe), (y << 16) | x);
- else
- I915_WRITE_FW(DVSLINOFF(pipe), linear_offset);
+ I915_WRITE_FW(DVSTILEOFF(pipe), (y << 16) | x);
+ I915_WRITE_FW(DVSLINOFF(pipe), linear_offset);
- I915_WRITE_FW(DVSSIZE(pipe), (crtc_h << 16) | crtc_w);
- I915_WRITE_FW(DVSSCALE(pipe), dvsscale);
+ /*
+ * The control register self-arms if the plane was previously
+ * disabled. Try to make the plane enable atomic by writing
+ * the control register just before the surface register.
+ */
I915_WRITE_FW(DVSCNTR(pipe), dvscntr);
I915_WRITE_FW(DVSSURF(pipe),
intel_plane_ggtt_offset(plane_state) + dvssurf_offset);
--
2.18.1
More information about the Intel-gfx
mailing list