[Intel-gfx] [PATCH v9 08/15] drm/i915/icl: Consider DSI for getting transcoder state

Madhav Chauhan madhav.chauhan at intel.com
Fri Nov 2 07:53:33 UTC 2018


On 11/1/2018 9:04 PM, Jani Nikula wrote:
> From: Madhav Chauhan <madhav.chauhan at intel.com>
>
> For Gen11 DSI, we use similar registers like for eDP
> to find if DSI encoder is connected or not to a pipe.
> This patch refactors existing hsw_get_transcoder_state()
> to handle this.
>
> v2 by Jani:
>   - Add WARN_ON(dsi && edp) (Ville)

v2 changes looks fine to me.

Regards,
Madhav

>
> Signed-off-by: Madhav Chauhan <madhav.chauhan at intel.com>
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
> ---
>   drivers/gpu/drm/i915/intel_display.c | 31 ++++++++++++++++++++++++-------
>   1 file changed, 24 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 2d5d034baa91..7337d579cbb6 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -9366,6 +9366,8 @@ static bool hsw_get_transcoder_state(struct intel_crtc *crtc,
>   	struct drm_i915_private *dev_priv = to_i915(dev);
>   	enum intel_display_power_domain power_domain;
>   	u32 tmp;
> +	bool is_dsi = false;
> +	bool is_edp = false;
>   
>   	/*
>   	 * The pipe->transcoder mapping is fixed with the exception of the eDP
> @@ -9378,26 +9380,41 @@ static bool hsw_get_transcoder_state(struct intel_crtc *crtc,
>   	 * consistency and less surprising code; it's in always on power).
>   	 */
>   	tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
> -	if (tmp & TRANS_DDI_FUNC_ENABLE) {
> -		enum pipe trans_edp_pipe;
> +	if (tmp & TRANS_DDI_FUNC_ENABLE)
> +		is_edp = true;
> +
> +	if (IS_ICELAKE(dev_priv)) {
> +		tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_DSI_0));
> +		if (tmp & TRANS_DDI_FUNC_ENABLE)
> +			is_dsi = true;
> +	}
> +
> +	WARN_ON(is_edp && is_dsi);
> +
> +	if (is_edp || is_dsi) {
> +		enum pipe trans_pipe;
>   		switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
>   		default:
>   			WARN(1, "unknown pipe linked to edp transcoder\n");
>   			/* fall through */
>   		case TRANS_DDI_EDP_INPUT_A_ONOFF:
>   		case TRANS_DDI_EDP_INPUT_A_ON:
> -			trans_edp_pipe = PIPE_A;
> +			trans_pipe = PIPE_A;
>   			break;
>   		case TRANS_DDI_EDP_INPUT_B_ONOFF:
> -			trans_edp_pipe = PIPE_B;
> +			trans_pipe = PIPE_B;
>   			break;
>   		case TRANS_DDI_EDP_INPUT_C_ONOFF:
> -			trans_edp_pipe = PIPE_C;
> +			trans_pipe = PIPE_C;
>   			break;
>   		}
>   
> -		if (trans_edp_pipe == crtc->pipe)
> -			pipe_config->cpu_transcoder = TRANSCODER_EDP;
> +		if (trans_pipe == crtc->pipe) {
> +			if (is_edp)
> +				pipe_config->cpu_transcoder = TRANSCODER_EDP;
> +			else if (is_dsi)
> +				pipe_config->cpu_transcoder = TRANSCODER_DSI_0;
> +		}
>   	}
>   
>   	power_domain = POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder);



More information about the Intel-gfx mailing list