[Intel-gfx] [PATCH 3/6] drm/i915/perf: lock powergating configuration to default when active

Tvrtko Ursulin tvrtko.ursulin at linux.intel.com
Tue Nov 13 14:35:32 UTC 2018


From: Lionel Landwerlin <lionel.g.landwerlin at intel.com>

If some of the contexts submitting workloads to the GPU have been
configured to shutdown slices/subslices, we might loose the NOA
configurations written in the NOA muxes.

One possible solution to this problem is to reprogram the NOA muxes
when we switch to a new context. We initially tried this in the
workaround batchbuffer but some concerns where raised about the cost
of reprogramming at every context switch. This solution is also not
without consequences from the userspace point of view. Reprogramming
of the muxes can only happen once the powergating configuration has
changed (which happens after context switch). This means for a window
of time during the recording, counters recorded by the OA unit might
be invalid. This requires userspace dealing with OA reports to discard
the invalid values.

Minimizing the reprogramming could be implemented by tracking of the
last programmed configuration somewhere in GGTT and use MI_PREDICATE
to discard some of the programming commands, but the command streamer
would still have to parse all the MI_LRI instructions in the
workaround batchbuffer.

Another solution, which this change implements, is to simply disregard
the user requested configuration for the period of time when i915/perf
is active. There is no known issue with this apart from a performance
penality for some media workloads that benefit from running on a
partially powergated GPU. We already prevent RC6 from affecting the
programming so it doesn't sound completely unreasonable to hold on
powergating for the same reason.

v2: Leave RPCS programming in intel_lrc.c (Lionel)

v3: Update for s/union intel_sseu/struct intel_sseu/ (Lionel)
    More to_intel_context() (Tvrtko)
    s/dev_priv/i915/ (Tvrtko)

Tvrtko Ursulin:

v4:
 * Rebase for make_rpcs changes.

v5:
 * Apply OA restriction from make_rpcs directly.

v6:
 * Rebase for context image setup changes.

v7:
 * Move stream assignment before metric enable.

v8-9:
 * Rebase.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin at intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_perf.c | 13 +++++++++----
 drivers/gpu/drm/i915/intel_lrc.c | 31 ++++++++++++++++++++-----------
 drivers/gpu/drm/i915/intel_lrc.h |  2 ++
 3 files changed, 31 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
index 2c2b63be7a6c..627a83af2288 100644
--- a/drivers/gpu/drm/i915/i915_perf.c
+++ b/drivers/gpu/drm/i915/i915_perf.c
@@ -1677,6 +1677,11 @@ static void gen8_update_reg_state_unlocked(struct i915_gem_context *ctx,
 
 		CTX_REG(reg_state, state_offset, flex_regs[i], value);
 	}
+
+	CTX_REG(reg_state, CTX_R_PWR_CLK_STATE, GEN8_R_PWR_CLK_STATE,
+		gen8_make_rpcs(dev_priv,
+			       &to_intel_context(ctx,
+						 dev_priv->engine[RCS])->sseu));
 }
 
 /*
@@ -2098,21 +2103,21 @@ static int i915_oa_stream_init(struct i915_perf_stream *stream,
 	if (ret)
 		goto err_lock;
 
+	stream->ops = &i915_oa_stream_ops;
+	dev_priv->perf.oa.exclusive_stream = stream;
+
 	ret = dev_priv->perf.oa.ops.enable_metric_set(stream);
 	if (ret) {
 		DRM_DEBUG("Unable to enable metric set\n");
 		goto err_enable;
 	}
 
-	stream->ops = &i915_oa_stream_ops;
-
-	dev_priv->perf.oa.exclusive_stream = stream;
-
 	mutex_unlock(&dev_priv->drm.struct_mutex);
 
 	return 0;
 
 err_enable:
+	dev_priv->perf.oa.exclusive_stream = NULL;
 	dev_priv->perf.oa.ops.disable_metric_set(dev_priv);
 	mutex_unlock(&dev_priv->drm.struct_mutex);
 
diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index dc1e08b72446..ee02c593a72c 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -1152,9 +1152,6 @@ static int __context_pin(struct i915_gem_context *ctx, struct i915_vma *vma)
 	return i915_vma_pin(vma, 0, 0, flags);
 }
 
-static u32
-make_rpcs(struct drm_i915_private *i915, struct intel_sseu *ctx_sseu);
-
 static void
 __execlists_update_reg_state(struct intel_engine_cs *engine,
 			     struct intel_context *ce)
@@ -1168,8 +1165,8 @@ __execlists_update_reg_state(struct intel_engine_cs *engine,
 
 	/* RPCS */
 	if (engine->class == RENDER_CLASS)
-		regs[CTX_R_PWR_CLK_STATE + 1] = make_rpcs(engine->i915,
-							  &ce->sseu);
+		regs[CTX_R_PWR_CLK_STATE + 1] = gen8_make_rpcs(engine->i915,
+							       &ce->sseu);
 }
 
 static struct intel_context *
@@ -2358,13 +2355,12 @@ int logical_xcs_ring_init(struct intel_engine_cs *engine)
 	return logical_ring_init(engine);
 }
 
-static u32
-make_rpcs(struct drm_i915_private *i915, struct intel_sseu *ctx_sseu)
+u32 gen8_make_rpcs(struct drm_i915_private *i915, struct intel_sseu *req_sseu)
 {
 	const struct sseu_dev_info *sseu = &INTEL_INFO(i915)->sseu;
 	bool subslice_pg = sseu->has_subslice_pg;
-	u8 slices = hweight8(ctx_sseu->slice_mask);
-	u8 subslices = hweight8(ctx_sseu->subslice_mask);
+	struct intel_sseu ctx_sseu;
+	u8 slices, subslices;
 	u32 rpcs = 0;
 
 	/*
@@ -2374,6 +2370,19 @@ make_rpcs(struct drm_i915_private *i915, struct intel_sseu *ctx_sseu)
 	if (INTEL_GEN(i915) < 9)
 		return 0;
 
+	/*
+	 * If i915/perf is active, we want a stable powergating configuration
+	 * on the system. The most natural configuration to take in that case
+	 * is the default (i.e maximum the hardware can do).
+	 */
+	if (unlikely(i915->perf.oa.exclusive_stream))
+		ctx_sseu = intel_device_default_sseu(i915);
+	else
+		ctx_sseu = *req_sseu;
+
+	slices = hweight8(ctx_sseu.slice_mask);
+	subslices = hweight8(ctx_sseu.subslice_mask);
+
 	/*
 	 * Since the SScount bitfield in GEN8_R_PWR_CLK_STATE is only three bits
 	 * wide and Icelake has up to eight subslices, specfial programming is
@@ -2443,13 +2452,13 @@ make_rpcs(struct drm_i915_private *i915, struct intel_sseu *ctx_sseu)
 	if (sseu->has_eu_pg) {
 		u32 val;
 
-		val = ctx_sseu->min_eus_per_subslice << GEN8_RPCS_EU_MIN_SHIFT;
+		val = ctx_sseu.min_eus_per_subslice << GEN8_RPCS_EU_MIN_SHIFT;
 		GEM_BUG_ON(val & ~GEN8_RPCS_EU_MIN_MASK);
 		val &= GEN8_RPCS_EU_MIN_MASK;
 
 		rpcs |= val;
 
-		val = ctx_sseu->max_eus_per_subslice << GEN8_RPCS_EU_MAX_SHIFT;
+		val = ctx_sseu.max_eus_per_subslice << GEN8_RPCS_EU_MAX_SHIFT;
 		GEM_BUG_ON(val & ~GEN8_RPCS_EU_MAX_MASK);
 		val &= GEN8_RPCS_EU_MAX_MASK;
 
diff --git a/drivers/gpu/drm/i915/intel_lrc.h b/drivers/gpu/drm/i915/intel_lrc.h
index f5a5502ecf70..a4e28cc55fda 100644
--- a/drivers/gpu/drm/i915/intel_lrc.h
+++ b/drivers/gpu/drm/i915/intel_lrc.h
@@ -104,4 +104,6 @@ void intel_lr_context_resume(struct drm_i915_private *dev_priv);
 
 void intel_execlists_set_default_submission(struct intel_engine_cs *engine);
 
+u32 gen8_make_rpcs(struct drm_i915_private *i915, struct intel_sseu *ctx_sseu);
+
 #endif /* _INTEL_LRC_H_ */
-- 
2.19.1



More information about the Intel-gfx mailing list