[Intel-gfx] [PATCH] drm/i915: Always write both TILEOFF and LINOFF plane registers
Ville Syrjälä
ville.syrjala at linux.intel.com
Tue Nov 13 15:59:59 UTC 2018
On Thu, Nov 08, 2018 at 05:09:55PM +0200, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Reduce the clutter in the sprite update functions by writing
> both TILEOFF and LINOFF registers unconditionally. We already
> did this for primary planes so might as well do it for the
> sprites too.
>
> There is no harm in writing both registers. Which one gets
> used depends on the tilimg mode selected in the plane control
> registers.
>
> It might even make sense to clear the register that won't
> get used. That could make register dumps a little easier to
> parse. But I'm not sure it's worth the extra hassle.
>
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Pushed with Maarten's irc r-b.
> ---
> drivers/gpu/drm/i915/intel_sprite.c | 21 +++++++--------------
> 1 file changed, 7 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> index 1293182dbcb0..06e8845b071d 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -792,7 +792,6 @@ vlv_update_plane(struct intel_plane *plane,
> const struct intel_plane_state *plane_state)
> {
> struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
> - const struct drm_framebuffer *fb = plane_state->base.fb;
> enum pipe pipe = plane->pipe;
> enum plane_id plane_id = plane->id;
> u32 sprctl = plane_state->ctl;
> @@ -829,10 +828,8 @@ vlv_update_plane(struct intel_plane *plane,
> plane_state->color_plane[0].stride);
> I915_WRITE_FW(SPPOS(pipe, plane_id), (crtc_y << 16) | crtc_x);
>
> - if (fb->modifier == I915_FORMAT_MOD_X_TILED)
> - I915_WRITE_FW(SPTILEOFF(pipe, plane_id), (y << 16) | x);
> - else
> - I915_WRITE_FW(SPLINOFF(pipe, plane_id), linear_offset);
> + I915_WRITE_FW(SPTILEOFF(pipe, plane_id), (y << 16) | x);
> + I915_WRITE_FW(SPLINOFF(pipe, plane_id), linear_offset);
>
> I915_WRITE_FW(SPCONSTALPHA(pipe, plane_id), 0);
>
> @@ -950,7 +947,6 @@ ivb_update_plane(struct intel_plane *plane,
> const struct intel_plane_state *plane_state)
> {
> struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
> - const struct drm_framebuffer *fb = plane_state->base.fb;
> enum pipe pipe = plane->pipe;
> u32 sprctl = plane_state->ctl, sprscale = 0;
> u32 sprsurf_offset = plane_state->color_plane[0].offset;
> @@ -990,12 +986,12 @@ ivb_update_plane(struct intel_plane *plane,
>
> /* HSW consolidates SPRTILEOFF and SPRLINOFF into a single SPROFFSET
> * register */
> - if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
> + if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
> I915_WRITE_FW(SPROFFSET(pipe), (y << 16) | x);
> - else if (fb->modifier == I915_FORMAT_MOD_X_TILED)
> + } else {
> I915_WRITE_FW(SPRTILEOFF(pipe), (y << 16) | x);
> - else
> I915_WRITE_FW(SPRLINOFF(pipe), linear_offset);
> + }
>
> I915_WRITE_FW(SPRSIZE(pipe), (crtc_h << 16) | crtc_w);
> if (IS_IVYBRIDGE(dev_priv))
> @@ -1119,7 +1115,6 @@ g4x_update_plane(struct intel_plane *plane,
> const struct intel_plane_state *plane_state)
> {
> struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
> - const struct drm_framebuffer *fb = plane_state->base.fb;
> enum pipe pipe = plane->pipe;
> u32 dvscntr = plane_state->ctl, dvsscale = 0;
> u32 dvssurf_offset = plane_state->color_plane[0].offset;
> @@ -1157,10 +1152,8 @@ g4x_update_plane(struct intel_plane *plane,
> I915_WRITE_FW(DVSSTRIDE(pipe), plane_state->color_plane[0].stride);
> I915_WRITE_FW(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
>
> - if (fb->modifier == I915_FORMAT_MOD_X_TILED)
> - I915_WRITE_FW(DVSTILEOFF(pipe), (y << 16) | x);
> - else
> - I915_WRITE_FW(DVSLINOFF(pipe), linear_offset);
> + I915_WRITE_FW(DVSTILEOFF(pipe), (y << 16) | x);
> + I915_WRITE_FW(DVSLINOFF(pipe), linear_offset);
>
> I915_WRITE_FW(DVSSIZE(pipe), (crtc_h << 16) | crtc_w);
> I915_WRITE_FW(DVSSCALE(pipe), dvsscale);
> --
> 2.18.1
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list