[Intel-gfx] [PATCH v2 1/3] drm/i915: Force background color to black for gen9+

[Matt Roper]

On Wed, Nov 14, 2018 at 07:28:12PM +0200, Ville Syrjälä wrote:
> On Tue, Nov 13, 2018 at 03:21:47PM -0800, Matt Roper wrote:
> > We don't yet allow userspace to control the CRTC background color, but
> > we should manually program the color to black to ensure the BIOS didn't
> > leave us with some other color.  We should also set the pipe gamma and
> > pipe CSC bits so that the background color goes through the same color
> > management transformations that a plane with black pixels would.
> > 
> > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
> > ---
> > We may want to land this patch before the rest of the series since it's
> > still valuable even without the new ABI the rest of the series adds.
> > 
> >  drivers/gpu/drm/i915/i915_reg.h      |  6 ++++++
> >  drivers/gpu/drm/i915/intel_display.c | 18 ++++++++++++++++++
> >  2 files changed, 24 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index fe4b913e46ac..b92a721c9bcb 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -5662,6 +5662,12 @@ enum {
> >  #define   PIPEMISC_DITHER_TYPE_SP	(0 << 2)
> >  #define PIPEMISC(pipe)			_MMIO_PIPE2(pipe, _PIPE_MISC_A)
> >  
> > +/* Skylake+ pipe bottom (background) color */
> > +#define _SKL_CANVAS_A			0x70034
> > +#define   SKL_CANVAS_GAMMA_ENABLE	(1 << 31)
> > +#define   SKL_CANVAS_CSC_ENABLE		(1 << 30)
> > +#define SKL_CANVAS(pipe)		_MMIO_PIPE2(pipe, _SKL_CANVAS_A)
> 
> Didn't the spec call this BOTTOM_COLOR or something like that?

The register definition is called BOTTOM_COLOR, but other areas of the
spec refer to this as either "background color" or "canvas color."  We
already have a CHV_CANVAS register that I believe provides the same
functionality for CHV (although I can't find details for the bit layout
in the spec), so I decided to just keep this name consistent with that
one.


Matt

> 
> > +
> >  #define VLV_DPFLIPSTAT				_MMIO(VLV_DISPLAY_BASE + 0x70028)
> >  #define   PIPEB_LINE_COMPARE_INT_EN		(1 << 29)
> >  #define   PIPEB_HLINE_INT_EN			(1 << 28)
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index 132e978227fb..1d089d93d88b 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -3868,6 +3868,15 @@ static void intel_update_pipe_config(const struct intel_crtc_state *old_crtc_sta
> >  		else if (old_crtc_state->pch_pfit.enabled)
> >  			ironlake_pfit_disable(old_crtc_state);
> >  	}
> > +
> > +	/*
> > +	 * We don't (yet) allow userspace to control the pipe background color,
> > +	 * so force it to black, but apply pipe gamma and CSC so that its
> > +	 * handling will match how we program our planes.
> > +	 */
> > +	if (INTEL_GEN(dev_priv) >= 9)
> > +		I915_WRITE(SKL_CANVAS(crtc->pipe),
> > +			   SKL_CANVAS_GAMMA_ENABLE | SKL_CANVAS_CSC_ENABLE);
> >  }
> >  
> >  static void intel_fdi_normal_train(struct intel_crtc *crtc)
> > @@ -15356,6 +15365,15 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc,
> >  			    plane->base.type != DRM_PLANE_TYPE_PRIMARY)
> >  				intel_plane_disable_noatomic(crtc, plane);
> >  		}
> > +
> > +		/*
> > +		 * Disable any background color set by the BIOS, but enable the
> > +		 * gamma and CSC to match how we program our planes.
> > +		 */
> > +		if (INTEL_GEN(dev_priv) >= 9)
> > +			I915_WRITE(SKL_CANVAS(crtc->pipe),
> > +				   SKL_CANVAS_GAMMA_ENABLE |
> > +				   SKL_CANVAS_CSC_ENABLE);
> >  	}
> >  
> >  	/* Adjust the state of the output pipe according to whether we
> > -- 
> > 2.14.4
> 
> -- 
> Ville Syrjälä
> Intel

-- 
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795